Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Samtec FTSH-107-01-L-DV-K-A is a 2-row, 14-contact board connector with Tin-Nickel finish. Operating from -55°C to 125°C, it has a pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in electronics requiring male connectors with straight mounting style.
Median Price
$3.450
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Farnell
1+ parts
$3.090
100+ parts
$2.310
1k+ parts
$2.220
10k+ parts
-
Chip1Stop
$3.200
$2.140
$2.130
DigiKey
$3.210
$2.662
$1.929
$1.431
Arrow
$3.244
$2.690
$1.950
$1.917
Mouser Electronics
$2.860
$2.420
$1.910
Master Electronics
$3.729
$2.620
$1.880
$1.600
Newark
$3.880
$3.320
$2.560
$1.990
Element14
$4.560
$3.780
$3.240
Verical
RS (Exports)
$3.955
$3.493
Nova Conductors
$3.449
TME
$4.780
$3.040
Chip Stock
Vyrian
NAC Semi
$4.040
$3.740
IBS Electronics
$4.236
$2.749
$1.823
Electro Sonic
$4.000
$2.930
$2.670
Sensible Micro Corp
Aztec Data Supply Inc.
$1.322
Argo Parts USA
Advanced Electronics
$5.216
$4.955
Continental Prestige Electronics
$5.470
$3.980
$2.890
Corohmni
$8.817
Authorized Procurement Solutions
GreenTree Electronics
Robosynatics
$0.121
Lucentia Tech
Allen Electronics Distributors
$4.600
Eastek
The use of Tin with Nickel barrier ensures reliable and durable connections, making this product a good choice for long-term usage.
Having 2 rows loaded allows for a higher density of connections, making it suitable for applications requiring multiple connections in a compact space.
The high maximum operating temperature ensures that this product can withstand higher temperature environments without compromising performance.
The low minimum operating temperature allows this product to be used in a wide range of environments, including those with colder temperatures.
Being a board connector, this product is designed specifically for connecting to circuit boards, ensuring a secure and stable connection.
Having a UL flammability rating of 94V-0 indicates that this product is highly flame resistant, providing added safety in case of fire.
With 14 contacts, this product offers a sufficient number of connections for various applications, making it versatile and adaptable.
The board mounting type ensures easy and secure installation onto circuit boards, making integration into electronic systems straightforward.
The terminal pitch of 1.27mm allows for precise alignment and spacing of connections, contributing to overall system reliability.
The surface mount termination type facilitates easy and efficient soldering onto PCBs, enabling a strong and stable electrical connection.
Having male contacts is common in electronic connectors and ensures compatibility with a wide range of female connectors, enhancing versatility.
The straight mounting style simplifies installation and alignment, making this product user-friendly and suitable for various electronic applications.
Headers & Edge Type Connectors FTSH-107-01-L-DV-K-A attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Connector Type:
Termination Contact Finish:
Contact Gender:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
FTSH-107-01-L-DV-K-A Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Hy Electronic
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
22-05-7048
Molex
Molex 22-05-7048 is a board connector with 4 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 5Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications, it has a temperature range from -40 to 105°C and UL flammability rating of 94V-0.
2309413-1
TE Connectivity
TE Connectivity 2309413-1 is a CARD EDGE CONNECTOR with 260 contacts, POLYETHYLENE insulator, and 0.5A signal current rating. It has a mating contact pitch of 0.02", body dimensions of 2.874" x 0.362" x 1.017". Ideal for board mounting applications in electronics with operating temperatures from -55 to 85°C.
66506-329LF
Amphenol Communications Solutions
Amphenol's 66506-329LF is a 26-contact board connector with 2 rows, UL94V-0 flammability rating, and 2.54mm terminal pitch. Ideal for applications requiring male solder contacts in straight mounting style on boards.
70543-0003
Molex 70543-0003 header connector features 0.1" pitch, 850VAC dielectric voltage, and -40 to 105°C operating range. Ideal for board connections in commercial applications requiring a durable, polarized housing with matte tin finish and phosphor bronze contacts.
1565917-4
TE Connectivity 1565917-4 is a Card Edge Connector with 200 contacts, gold finish, and polyethylene insulator. It has a mating contact pitch of 0.024", suitable for board mounting with right-angle style. Operating temperature ranges from -55 to 85°C, making it ideal for various electronic applications.
3000
3m Electronic Products Division
The 3m Electronic Products Division's mfgpartno 3000 is a BOARD CONNECTOR with UL Flammability Code 94V-0. It features Terminal Pitch of 2.54mm and SOLDER Termination Type, suitable for applications requiring RIGHT ANGLE or STRAIGHT Mounting Style.
22-23-2021
Molex 22-23-2021 header connector features 0.1" mating contact pitch, 0.194" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with UL and CSA standards compliance.
1-640456-3
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mixed Contacts: NO; JESD-609 Code: e3;
823-22-014-10-000101
Mill-max Mfg
823-22-014-10-000101 by Mill-max Mfg is a 14-contact board stacking connector with gold over nickel finish. Featuring 2 rows, it has a terminal pitch of 2.54mm and UL flammability rating of 94V-0. Ideal for applications requiring reliable connections in electronic devices.
43025-1600
The Molex 43025-1600 is a board connector with 16 contacts, rated at 2.5A signal current. It has a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring reliable connections in tight spaces.
1367073-1
TE Connectivity 1367073-1 is a 2-row board connector with 0.031" mating contact pitch. Featuring liquid crystal polymer insulator, it has a max operating temperature of 85°C and -55°C min. Ideal for commercial applications, this female connector offers 20 contacts and surface mount termination.
89110-0101
89110-0101 by 3M Electronic Products Division is a board connector with a mating contact pitch of 0.1", insulation resistance of 1G ohm, and dielectric voltage of 1400VAC. It has a body length of 0.68", suitable for applications requiring a reliable socket connector with IDC termination and gold-nickel finish for signal currents up to 1.25A in commercial settings.
M50-3600542R
Harwin Plc
The Harwin PLC M50-3600542R is a 10-contact female board connector with a mating contact pitch of 0.05", ideal for PCB applications. Featuring tin finish with nickel barrier, it offers high insulation resistance of 1 Gohm and operates b/w -40°C to 105°C. With durability up to 300 cycles, this UL-rated connector is suitable for commercial use in various electronic devices.
7-188275-6
TE Connectivity 7-188275-6 is a FFC/FPC connector with 0.05" mating contact pitch, 100 V rated voltage, and -40 to 105 °C operating temperature range. It has POLYAMIDE46 insulator material and is ideal for board mounting applications requiring high insulation resistance and low contact resistance.
357-074-422-212
Edac
Edac 357-074-422-212 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 5A signal current. Featuring a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm, it operates b/w -40 to +105°C. Ideal for applications requiring high reliability and durability in electrical connections.
801-43-020-10-002000
801-43-020-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 20 contacts, featuring MATTE TIN OVER NICKEL finish. It has a terminal pitch of 2.54mm and uses SOLDER termination. Ideal for applications requiring FEMALE contact gender in STRAIGHT mounting style on a PCB.
MEM2051-00-195-00-A
Global Connector Technology
MEM2051-00-195-00-A by Global Connector Technology is a PCB connector with 0.043" contact pitch, 500VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for applications requiring a female right-angle compression contact style with surface mount termination.
09-50-3041
Molex 09-50-3041 is a board connector with 0.156" mating pitch, 0.62"x.25"x.625" body dimensions, and POLYAMIDE insulator material. It has 4 contacts, FEMALE gender, PLUG shell style, and CRIMP termination type for CABLE mounting applications in commercial settings.
BM04B-SRSS-G-TB(LF)(SN)
J S T Mfg
BM04B-SRSS-G-TB(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with Tin (Sn) finish. Made of copper alloy, it has UL 94V-0 flammability rating and surface mount termination. Ideal for straight board mounting applications in electronics.
DF40C-80DP-0.4V(51)
Hirose Electric
DF40C-80DP-0.4V(51) by Hirose Electric is a 2-row, 80-contact board stacking connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.016", it offers high insulation resistance of 50M ohm and withstands up to 100VAC. Ideal for PCB applications requiring reliable signal transmission in commercial environments at temperatures ranging from -35°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FTSH-105-01-L-DV-K-P-TR
Samtec
Samtec's FTSH-105-01-L-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator material and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
FTSH-105-01-L-DV-K-TR
Samtec's FTSH-105-01-L-DV-K-TR is a 2-row, 10-contact board connector with a contact pitch of 0.05". Featuring TIN over nickel finish, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable male connectors in black insulator material.
FTSH-105-01-L-DV-K
Samtec's FTSH-105-01-L-DV-K is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, straight-mount male connector with surface mount termination.
FTSH-105-01-L-DV-K-A-P-TR
Samtec FTSH-105-01-L-DV-K-A-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator material and gold over nickel finish, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
FTSH-105-01-L-DV-K-P
Samtec's FTSH-105-01-L-DV-K-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features TIN over NICKEL termination finish and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable connections on PCBs with a rectangular contact pattern.
FTSH-105-01-L-DV-K-A-P
Samtec's FTSH-105-01-L-DV-K-A-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features gold over nickel finish, liquid crystal polymer insulator, and phosphor bronze contact material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
FTSH-105-01-L-DV-K-A
Samtec's FTSH-105-01-L-DV-K-A is a 2-row, 10-contact board connector with a contact pitch of 1.27mm. It features gold mating contacts over nickel for reliability and operates b/w -55°C to 125°C. Ideal for commercial applications requiring a surface mount termination type on PCBs with rectangular contact patterns.
FTSH-105-01-L-DV-K-P-FR
The Samtec FTSH-105-01-L-DV-K-P-FR is a 2-row, 10-contact male board connector with tin finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications requiring straight mounting style.
FTSH-105-01-L-DV-K-A-TR
Samtec's FTSH-105-01-L-DV-K-A-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring gold over nickel finish, it has a rated signal current of 3.4A and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
FTSH-105-01-F-DV-K-P-TR
Samtec's FTSH-105-01-F-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
FTSH-105-01-F-DV-K-TR
Samtec's FTSH-105-01-F-DV-K-TR is a 2-row, 10-contact board connector with a contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
FTSH-105-01-F-DV-K-P
Samtec's FTSH-105-01-F-DV-K-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
FTSH-105-01-L-DV-K-FR
Samtec's FTSH-105-01-L-DV-K-FR is a 10-contact, 2-row male board connector with tin finish and nickel barrier. Featuring a terminal pitch of 1.27mm, it is UL 94V-0 rated for surface mount applications. Ideal for use in headers & edge type connectors on PCBs.
FTSH-105-01-F-DV-K-A-P-TR
Samtec's FTSH-105-01-F-DV-K-A-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts plated with gold flash over nickel for signal currents up to 3.4A. Ideal for commercial applications requiring reliable surface mount connections at temperatures ranging from -55°C to 125°C.
FTSH-105-01-F-DV-K-A-P
Samtec's FTSH-105-01-F-DV-K-A-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash finish and operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, male straight pin-skt connector for surface mount termination on PCBs.
FTSH-105-01-F-DV-K
Samtec's FTSH-105-01-F-DV-K is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator and matte tin over nickel termination, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
FTSH-105-01-F-DV-K-P-FR
The Samtec FTSH-105-01-F-DV-K-P-FR is a 2-row, 10-contact male board connector with tin finish and nickel barrier. It has a terminal pitch of 1.27mm and UL flammability rating of 94V-0. Ideal for surface mount applications in electronics requiring high-density connections.
FTSH-105-01-F-DV-K-A
Samtec's FTSH-105-01-F-DV-K-A is a 2-row, 10-contact board connector with a contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator. Ideal for commercial applications, it has a temperature range of -55 to 125°C and surface mount termination.
FTSH-105-01-F-DV-K-A-TR
Samtec's FTSH-105-01-F-DV-K-A-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
FTSH-105-01-L-DV-K-A-P-FR
Samtec's FTSH-105-01-L-DV-K-A-P-FR is a 10-contact, 2-row male board connector with tin finish. Featuring a 1.27mm pitch, it is surface mountable and UL94V-0 rated. Ideal for applications requiring straight mounting of edge type connectors.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved