Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec IPS1-125-01-SM-D-RA is a rectangular power connector with 50 contacts. It features phosphor bronze contacts with gold finish and liquid crystal polymer insulator. Ideal for board mounting applications requiring solder termination, especially in power systems.
Median Price
$10.100
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
$7.600
1k+ parts
$4.920
10k+ parts
Verical
Powell Electronics
$10.770
Nova Conductors
$4.578
Vyrian
TME
$7.680
Continental Prestige Electronics
$4.486
Netroflash
$4.349
$4.257
AZTECH Wire
$5.230
$5.020
$4.820
Authorized Procurement Solutions
Metaverse IC Inc.
Argo Parts USA
This finish provides excellent corrosion resistance and durability, ensuring a reliable connection over time.
This material offers high heat resistance and excellent electrical properties, making it ideal for power connectors that may experience high temperatures and voltages.
Rectangular power connectors are commonly used and widely compatible, providing ease of integration into various systems.
Phosphor bronze is a strong and durable material that ensures reliable electrical conductivity, maintaining a stable connection.
Gold mating contacts offer low contact resistance and high reliability, ensuring excellent signal transmission and longevity of the connector.
Having a high number of contacts allows for multiple connections within a single connector, providing versatility and flexibility in power distribution.
Board mounting offers secure attachment to a circuit board, ensuring stability and reliability in the connection between the power source and device.
Solder termination provides a reliable and permanent connection, preventing loosening or disconnection of wires in high-vibration environments.
Female connectors are commonly used for power outputs or external connections, offering a secure and protected connection for the device.
Socket-style connectors provide a secure fit and easy connection process, ensuring a reliable power supply to the device.
Power Connectors IPS1-125-01-SM-D-RA attributes and parameters. Explore more Power Connectors devices from Samtec
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
IPS1-125-01-SM-D-RA Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Hitano Enterprise
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
Zetex Plc
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Promax-johnton
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
43020-0600
Molex
The Molex 43020-0600 is a rectangular power connector with a body depth of 0.665 inch. It has an insulator material made of PBT-POLYESTER and can operate in temperatures ranging from -40 to 105 °C. This connector is commonly used for power connections in commercial applications.
39-29-9107
The Molex 39-29-9107 is a rectangular power connector with a body length of 0.87", width of 0.38", and depth of 0.5". It has an insulation resistance of 1GΩ, dielectric voltage withstand of 1500VAC, and operates in temperatures ranging from -40°C to 105°C. This connector is commonly used in board mounting applications for commercial purposes.
647845-8
TE Connectivity
TE Connectivity 647845-8 is a RECTANGULAR POWER CONNECTOR with 2 contacts, rated at 600V and suitable for cables with wire sizes ranging from 12 to 6 AWG. Made of POLYCARBONATE, it has a body size of 1.9"x1.38"x0.625" and operates in temperatures from -20 to 105°C. Ideal for power applications requiring high voltage and temperature resistance.
4-794637-2
4-794637-2 by TE Connectivity is a Power Connector with 0.118" mating contact pitch, rated for 250V and -40 to 105°C operating temperatures. It has POLYAMIDE insulation, UL94V-0 flammability rating, and supports 5A signal current. Ideal for board mounting applications requiring durable male connectors with locking options.
1-178316-3
Tyco Electronics Amp
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Insulator Material: GLASS FILLED POLYETHYLENE/POLYESTER; Filter Feature: NO;
43020-0800
Molex 43020-0800 is a rectangular power connector with 8 contacts, PBT-POLYESTER insulator, and -40 to 105°C operating temperature range. Ideal for commercial applications, it features crimp termination, black insulator color, and UL 94V-0 flammability rating.
39-30-1040
Molex 39-30-1040 is a rectangular power connector with 4 contacts, made of brass and featuring matte tin finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to +105°C. Ideal for board mounting applications in commercial settings due to its durability and reliability standards from CSA, TUV, and UL.
1-770182-0
TE Connectivity 1-770182-0 is a power connector with 0.55" body length, rated for 600V. Featuring POLYAMIDE insulation material, it has 9 contacts arranged in S0P9 pattern. Ideal for board mounting applications with a temperature range of -55 to 105°C.
43045-1219
Molex 43045-1219 is a rectangular power connector with insulation resistance of 1Gohm, dielectric voltage of 1000VAC, and operating temp range from -40 to 105°C. It features a male contact gender, surface mount termination type, and is suitable for board mounting applications in commercial settings.
5557-02R
Molex 5557-02R is a rectangular power connector with 2 rows, POLYAMIDE insulator, and 0.77" body depth. It operates b/w -40 to 105°C, suitable for cable mounting applications requiring female contacts with SQ PIN-SKT style.
43045-0812
The Molex 43045-0812 is a rectangular power connector with 8 contacts, featuring bright tin over nickel termination finish. With a mating contact pitch of 0.118", it offers high insulation resistance of 1Gohm and withstands up to 1500VAC. Ideal for board mounting applications in commercial settings, this connector has a durability of 30 cycles and operates b/w -40°C to 105°C temperature range.
36792-1201
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 36792; Contact Material: NOT SPECIFIED;
39-30-1080
The Molex 39-30-1080 is a rectangular power connector with 8 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. Ideal for commercial reliability requirements.
91999-1249
The Molex 91999-1249 is a rectangular power connector with insulator material POLYAMIDE. It has 3 contacts, male gender, and blade pin-skt contact style. Suitable for board mounting with solder termination, it operates b/w -20 to 120°C and offers high insulation resistance of 10^7 ohm.
931
Anderson Power Products
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; UL Flammability Code: 94V-0; Filter Feature: NO; Contact Material: NOT SPECIFIED;
6643269-1
TE Connectivity 6643269-1 is a rectangular power connector with silver termination finish. It has a rated current of 35A and operates b/w -40 to 105°C. Ideal for board mounting applications, featuring compliant boardlock option and press fit terminals.
39-30-1122
The Molex 39-30-1122 is a rectangular power connector with 12 contacts, featuring a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage rating of 1500VAC. It is used in board mounting applications for signal currents up to 6A, with durability rated at 30 cycles.
1-770873-1
TE Connectivity 1-770873-1 is a Power Connector with 0.55"x.25"x.531" dimensions, rated for 600V and 105°C. Featuring Matte Tin finish, it has 3 contacts and UL94V-0 flammability rating. Ideal for board mounting applications, this connector has a solder termination type and is suitable for signal currents up to 9.5A.
105310-1204
Molex 105310-1204 Power Connector features Liquid Crystal Polymer insulator, rated for 7.5A signal current. With UL94V-0 flammability rating, it operates from -40 to 115°C. Ideal for board mounting applications with male SQ pin-skt contacts.
93445-3501
Molex 93445-3501 is a rectangular power connector with GLASS FILLED POLYAMIDE insulator. It has 4 contacts, rated at 13A signal current. Ideal for cable mounting applications, operating b/w -55 to 125°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IPS1-125-01-S-D
Samtec
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
IPS1-125-01-S-D-RA
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Manufacturer Series: IPS1; DIN Conformance: NO; Contact Material: PHOSPHOR BRONZE; Body or Shell Style: SOCKET;
IPS1-125-01-L-D
Samtec IPS1-125-01-L-D is a rectangular power connector with 50 contacts, rated at 2.3A signal current. Featuring liquid crystal polymer insulator and phosphor bronze contact material, it operates b/w -55 to 105°C. Ideal for commercial applications requiring reliable board mounting with solder termination.
IPS1-125-01-L-D-RA
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mixed Contacts: NO;
IPS1-105-01-S-D
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; JESD-609 Code: e3;
IPS1-110-01-L-D-VS-LC
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO; Total No. of Contacts: 20;
IPS1-110-01-L-D-VS-LC-K
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
IPS1-110-01-L-D-VS-LC-K-TR
IPS1-110-01-L-D-VS-LC-PL
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Rated Current - Signal: 5.9 A; Body Width: .195 inch;
IPS1-105-01-S-D-RA
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; Mating Contact Finish: GOLD; JESD-609 Code: e4; Contact Material: PHOSPHOR BRONZE;
IPS1-125-01-S-D-FL
RECTANGULAR POWER CONNECTOR; Manufacturer Series: IPS1; Termination Contact Finish: TIN OVER NICKEL;
IPS1-110-01-L-D-RA
Samtec IPS1-110-01-L-D-RA is a power connector with 20 contacts, rated at 2.3A signal current. It features liquid crystal polymer insulator, tin termination finish, and gold mating contact finish. Ideal for board mounting applications in commercial settings with operating temperatures from -55°C to 105°C.
IPS1-125-01-H-D
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: GOLD OVER NICKEL; Manufacturer Series: IPS1;
IPS1-125-01-L-D-VS-K
RECTANGULAR POWER CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
IPS1-125-01-L-D-VS-LC
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: SQ PIN-SKT; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
IPS1-115-01-L-D
Samtec IPS1-115-01-L-D is a rectangular power connector with 30 contacts, rated at 2.3A signal current. Featuring liquid crystal polymer insulator and gold mating contact finish over nickel, it operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its solder termination and high reliability.
IPS1-105-01-L-D
Samtec's IPS1-105-01-L-D is a rectangular power connector with 10 contacts, rated for 2.3A signal current. It features liquid crystal polymer insulator, gold mating contact finish, and phosphor bronze contact material. Ideal for board mounting applications in commercial settings due to its high reliability and temperature range of -55°C to 105°C.
IPS1-110-01-L-D
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO;
IPS1-111-01-S-D-VS
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: GOLD; MIL Conformity: NO; DIN Conformance: NO; Termination Contact Finish: TIN OVER NICKEL;
IPS1-125-01-SM-D-VS-LC-PL
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: SOCKET; Termination Type: SURFACE MOUNT; Rated Current - Signal: 5.9 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved