Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
Median Price
$3.210
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
100+ parts
$2.960
1k+ parts
$2.850
10k+ parts
$2.090
DigiKey
$2.740
$2.584
-
Nova Conductors
Vyrian
Corohmni
$3.844
Aztec Data Supply Inc.
$6.880
AZTECH Wire
$14.410
$13.840
$13.560
$13.290
Continental Prestige Electronics
Argo Parts USA
Authorized Procurement Solutions
Bastille Electronics
Power Connectors IPS1-110-01-L-D-VS-LC-K attributes and parameters. Explore more Power Connectors devices from Samtec
Connector Type:
Termination Contact Finish:
JESD-609 Code:
IPS1-110-01-L-D-VS-LC-K Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Promax-johnton
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
Surge Components
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
39-01-2126
The Molex 39-01-2126 is a rectangular power connector with 12 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. It is used in commercial applications for cable and panel mounting, featuring a durability of 30 cycles and operating temperatures from -40 to 105°C.
771-9975/116-701
Wago
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
43640-0200
The Molex 43640-0200 is a rectangular power connector with 2 contacts, rated for 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates in temperatures from -40 to 105°C. Ideal for cable and panel mounting applications requiring durable crimp terminations.
0-0350781-1
TE Connectivity
TE Connectivity 0-0350781-1 is a panel mount rectangular power connector with 6 contacts, made of nylon insulator material. It has a body length of 1.02", insulation resistance of 1000000000 ohm, and operates b/w -55 to 105°C. Ideal for commercial applications requiring durable male connectors with crimp termination.
350836-1
TE Connectivity 350836-1 is a Power Connector with 12A signal current rating. It features POLYAMIDE insulator, Tin termination finish, and 105°C max operating temp. Ideal for board mounting applications requiring a straight plug style connector with 12 female contacts in a single row.
39-01-3129
Molex 39-01-3129 is a rectangular power connector with 12 contacts, rated at 9A signal current. Featuring a mating contact pitch of 0.165", it has an insulation resistance of 1G ohm and can withstand up to 1500VAC. Ideal for commercial applications, this male plug connector offers durability with a min withdrawal force of 3.1136N and operates b/w -40°C to +105°C temperature range.
43650-0412
The Molex 43650-0412 is a rectangular power connector with a mating contact pitch of 0.118 inches and a body length of 0.616 inch. It has an insulation resistance of 1,000,000,000 ohm and is commonly used in board mounting applications for power connections.
IPL1-103-01-L-D-K
Samtec
Samtec IPL1-103-01-L-D-K is a rectangular power connector with 6 contacts. It features gold shell finish, solder termination, and phosphor bronze contact material. Ideal for board mounting applications in temperatures ranging from -55°C to 125°C.
93445-3101
The Molex 93445-3101 is a rectangular power connector with dimensions of 0.816" x 0.807" x 2.34". It has an insulator made of glass-filled polyamide and can operate b/w -55°C to 125°C. With a rated current of 13A, it is ideal for applications requiring a female receptacle connector with crimp termination on cables.
640445-3
TE Connectivity's 640445-3 is a rectangular power connector with a mating contact pitch of 0.156". It features an insulation resistance of 5Gohm, operating temperature range from -55 to 105°C, and rated current of 7A. Ideal for board mounting applications requiring durable connectors with male contacts and solder termination.
1723163208
Molex 1723163208 Power Connector features Liquid Crystal Polymer insulator, -40 to 120°C operating temp range, and UL 94V-0 flammability rating. With 8 contacts, it is ideal for board mounting applications requiring a male SQ PIN-SKT contact style with 11A signal current capacity.
15-06-0140
Molex 15-06-0140 is a RECTANGULAR POWER CONNECTOR with 14 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It has a temperature range of -40 to 105°C and features SOLDER termination for PANEL mounting. Ideal for commercial applications requiring high insulation resistance and reliable female contact arrangement.
DF22-4S-7.92C(28)
Hirose Electric
POWER CONNECTOR; Reliability: COMMERCIAL; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; MIL Conformity: NO; DIN Conformance: NO;
35150-0204
The Molex 35150-0204 is a RECTANGULAR POWER CONNECTOR with POLYBUTYLENE TEREPHTHALATE insulator. UL 94V-0 rated, it has 2 contacts for CABLE mounting and WIRE termination. Ideal for power applications requiring reliable MALE contact gender.
2008750006
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
03-09-2032
Molex 03-09-2032 is a rectangular power connector with 0.198" mating contact pitch, suitable for commercial applications. It has a dielectric voltage of 2000VAC, rated current of 14A, and operates b/w -55 to 105°C. The connector features a polarized housing, solder termination, and can accommodate wire sizes from 22 to 14 AWG.
39-29-9062
Molex 39-29-9062 is a rectangular power connector with 6 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards meeting CSA and UL requirements.
15-06-0100
Molex 15-06-0100 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. It has 10 contacts, operates b/w -40 to 105 °C, and offers high insulation resistance of 1G ohm. Ideal for commercial applications requiring reliable power connections in panels with solder termination.
1723103102
The Molex 1723103102 is a power connector with dimensions of 0.405" x 0.352" x 0.614". It has a liquid crystal polymer insulator and can operate in temperatures ranging from -40°C to 105°C. This board-mounted connector features a male SQ PIN-SKT contact style and is commonly used in various applications requiring reliable power connections.
39-01-2166
The Molex 39-01-2166 is a rectangular power connector with 16 contacts, POLYAMIDE insulator, and 2200VAC dielectric voltage. It has a temperature range of -40 to 105 °C and is suitable for commercial applications requiring durable crimp termination connectors with locking mounting options.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IPS1-125-01-S-D
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
IPS1-125-01-S-D-RA
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Manufacturer Series: IPS1; DIN Conformance: NO; Contact Material: PHOSPHOR BRONZE; Body or Shell Style: SOCKET;
IPS1-125-01-L-D
Samtec IPS1-125-01-L-D is a rectangular power connector with 50 contacts, rated at 2.3A signal current. Featuring liquid crystal polymer insulator and phosphor bronze contact material, it operates b/w -55 to 105°C. Ideal for commercial applications requiring reliable board mounting with solder termination.
IPS1-125-01-L-D-RA
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mixed Contacts: NO;
IPS1-105-01-S-D
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; JESD-609 Code: e3;
IPS1-110-01-L-D-VS-LC
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO; Total No. of Contacts: 20;
IPS1-110-01-L-D-VS-LC-K-TR
IPS1-110-01-L-D-VS-LC-PL
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Rated Current - Signal: 5.9 A; Body Width: .195 inch;
IPS1-105-01-S-D-RA
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; Mating Contact Finish: GOLD; JESD-609 Code: e4; Contact Material: PHOSPHOR BRONZE;
IPS1-125-01-S-D-FL
RECTANGULAR POWER CONNECTOR; Manufacturer Series: IPS1; Termination Contact Finish: TIN OVER NICKEL;
IPS1-110-01-L-D-RA
Samtec IPS1-110-01-L-D-RA is a power connector with 20 contacts, rated at 2.3A signal current. It features liquid crystal polymer insulator, tin termination finish, and gold mating contact finish. Ideal for board mounting applications in commercial settings with operating temperatures from -55°C to 105°C.
IPS1-125-01-H-D
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: GOLD OVER NICKEL; Manufacturer Series: IPS1;
IPS1-125-01-L-D-VS-K
RECTANGULAR POWER CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
IPS1-125-01-L-D-VS-LC
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: SQ PIN-SKT; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
IPS1-125-01-SM-D-RA
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Contact Material: PHOSPHOR BRONZE; Mating Contact Finish: GOLD;
IPS1-115-01-L-D
Samtec IPS1-115-01-L-D is a rectangular power connector with 30 contacts, rated at 2.3A signal current. Featuring liquid crystal polymer insulator and gold mating contact finish over nickel, it operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its solder termination and high reliability.
IPS1-105-01-L-D
Samtec's IPS1-105-01-L-D is a rectangular power connector with 10 contacts, rated for 2.3A signal current. It features liquid crystal polymer insulator, gold mating contact finish, and phosphor bronze contact material. Ideal for board mounting applications in commercial settings due to its high reliability and temperature range of -55°C to 105°C.
IPS1-110-01-L-D
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO;
IPS1-111-01-S-D-VS
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: GOLD; MIL Conformity: NO; DIN Conformance: NO; Termination Contact Finish: TIN OVER NICKEL;
IPS1-110-01-L-D-VS-FL-PL-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: SOCKET; Termination Contact Finish: MATTE TIN; Rated Current - Signal: 5.9 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved