Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec IPL1-110-01-F-D-RA-K is a 20-contact rectangular power connector with liquid crystal polymer insulator. It features phosphor bronze contacts with gold over nickel finish, suitable for commercial applications. With a right-angle mounting style and solder termination, it operates b/w -55°C to 125°C, meeting UL standards.
Median Price
$3.470
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Master Electronics
1+ parts
$3.267
100+ parts
$2.680
1k+ parts
$2.160
10k+ parts
$2.100
Farnell
$3.280
$2.580
$1.990
-
Chip1Stop
DigiKey
$2.380
$2.197
Mouser Electronics
$2.880
$2.240
$2.170
Element14
$4.780
$3.290
$2.850
Powell Electronics
$3.800
Arrow
$2.739
$2.096
Verical
Vyrian
Electro Sonic
$2.670
$1.380
IBS Electronics
$3.835
$2.566
$1.791
Nova Conductors
Continental Prestige Electronics
$4.640
$3.710
$2.690
AZTECH Wire
$7.390
$7.100
$6.960
$6.820
Argo Parts USA
Netroflash
The compact size of the body allows for easy installation in tight spaces, making it versatile for various applications.
The use of Tin with Nickel barrier ensures a reliable and durable connection, preventing corrosion and enhancing conductivity.
With a high maximum operating temperature, this power connector can withstand elevated temperatures without compromising performance.
Phosphor bronze contacts provide excellent electrical conductivity and durability, ensuring a stable connection over time.
The board mounting type allows for secure and stable installation on circuit boards, ensuring a reliable connection in electronic devices.
The square pin and socket contact style ensures a secure and stable connection, reducing the risk of signal interference or loss.
Power Connectors IPL1-110-01-F-D-RA-K attributes and parameters. Explore more Power Connectors devices from Samtec
Additional Features:
Body Width:
Body Length:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
IPL1-110-01-F-D-RA-K Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
General Instrument
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
RC0402JR-070RL
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
428192212
Molex
Molex 428192212 power connector features 50A signal current, 2200VAC dielectric voltage, and -40 to 105°C operating temperature. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
1716920106
Molex 1716920106 is a rectangular power connector with 6 contacts, made of POLYBUTYLENE TEREPHTHALATE. It has a body size of 0.699" x 0.561" x 0.981", UL94V-0 rated, and operates b/w -40°C to 120°C. Ideal for cable mounting applications requiring female SQ PIN-SKT contacts.
172157-1
TE Connectivity
TE Connectivity's 172157-1 is a POWER CONNECTOR with 0.465" body length, 0.22" width, and 100000000 ohm insulation resistance. Ideal for applications requiring a rated voltage of 600V, POLYAMIDE66 insulator material, and operating temperatures from -20 to 105 °C.
176301-1
TE Connectivity's 176301-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. It has 18 contacts, rated at 7A, and operates b/w -30 to 105°C. Ideal for PANEL mounting, it offers high durability with a min withdrawal force of 0.556N and max insertion force of 4.448N.
39-01-2021
The Molex 39-01-2021 is a rectangular power connector with 0.425" body length, 0.46" width, and 0.94" depth. It has an insulation resistance of 1000000000 ohm and dielectric voltage of 1500VAC. Ideal for commercial applications, this connector features a POLYAMIDE insulator and operates b/w -40 to 105°C temperatures.
IPBD-04-D
Samtec
The Samtec IPBD-04-D is a Power Connector with 0.7" body length and 0.478" width. It has 8 contacts, TIN over NICKEL finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring a reliable crimped female connector with UL standard compliance.
1-794617-2
TE Connectivity 1-794617-2 is a Power Connector with 0.118" contact pitch, rated for 250V and 5A signal current. Featuring POLYAMIDE66 insulator, it has a temperature range of -40 to 105°C. Ideal for commercial applications requiring reliable power connections.
43020-2200
The Molex 43020-2200 is a rectangular power connector with 22 contacts, PBT-POLYESTER insulator, and UL 94V-0 flammability rating. It is used for commercial applications, featuring crimp termination, straight mounting style, and latch option for secure installation on cables and panels.
CP-01114010
Cvilux
CP-01114010 by Cvilux is a POWER CONNECTOR with 14 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It has a body length of 1.209" and depth of 0.772". Ideal for applications requiring reliable power connections in temperatures ranging from -25°C to 85°C.
39-30-0200
Molex 39-30-0200 is a rectangular power connector with 20 contacts, made of brass and polyamide66. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL94V-0 flammability rating.
428193222
Molex 428193222 Power Connector features 0.394" mating contact pitch, 1.33" body length, and 1000000000 ohm insulation resistance. Ideal for applications requiring a durable connector with 2200VAC dielectric voltage withstand and -40 to 105°C operating temperature range.
1954289-1
TE Connectivity 1954289-1 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates b/w -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.
178305-2
TE Connectivity's 178305-2 is a rectangular power connector with 10 contacts, rated at 15A. It features a body length of 1.151", insulation resistance of 100MΩ, and operates b/w -55°C to 105°C. Ideal for board mounting applications requiring durable connectors with solder termination.
1-770873-1
TE Connectivity 1-770873-1 is a Power Connector with 0.55"x.25"x.531" dimensions, rated for 600V and 105°C. Featuring Matte Tin finish, it has 3 contacts and UL94V-0 flammability rating. Ideal for board mounting applications, this connector has a solder termination type and is suitable for signal currents up to 9.5A.
IPD1-06-D-K-M
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
15-06-0141
Molex 15-06-0141 is a RECTANGULAR POWER CONNECTOR with 14 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It has a body size of 2.409" x 0.681" x 0.772", operating from -40 to 105°C. Ideal for commercial applications requiring reliable power connections with solder termination on panels.
1723163108
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
643414-1
TE Connectivity 643414-1 is a Power Connector with 0.8"x.3"x.3" dimensions, POLYAMIDE insulator, and Tin termination finish. Rated for 12A current, it's used in board mounting applications for power connections at -40 to 105°C temperatures.
IPD1-06-D
Samtec's IPD1-06-D is a RECTANGULAR POWER CONNECTOR with 12 contacts, POLYAMIDE66 shell material, and FEMALE crimp termination. Ideal for power applications requiring secure cable mounting.
43045-0412
The Molex 43045-0412 is a rectangular power connector with 4 contacts, featuring tin termination finish and brass contact material. With insulation resistance of 1G ohm, it operates b/w -40 to 105°C. Ideal for board mounting applications, this connector has a durability of 30 cycles and meets CSA, TUV, UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IPL1-102-01-L-D-K
Samtec's IPL1-102-01-L-D-K is a rectangular power connector with 4 contacts, rated at 7.5A signal current. It features liquid crystal polymer insulator, matte tin over nickel termination finish, and gold mating contact finish. Ideal for board mounting applications in commercial settings with an operating temperature range of -55 to 125°C.
IPL1-103-01-L-D-K
Samtec IPL1-103-01-L-D-K is a rectangular power connector with 6 contacts. It features gold shell finish, solder termination, and phosphor bronze contact material. Ideal for board mounting applications in temperatures ranging from -55°C to 125°C.
IPL1-102-01-L-D-RA-K
Samtec IPL1-102-01-L-D-RA-K is a rectangular power connector with 4 contacts, liquid crystal polymer insulator, and tin over nickel termination. It is used in commercial applications for board mounting and solder termination.
IPL1-102-01-L-S-RA-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO;
IPL1-102-01-L-S-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 675VAC; No. of Connectors: ONE;
IPL1-102-01-S-S-K
IPL1-112-01-L-D-RA-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER;
IPL1-112-01-L-D-K
Samtec's IPL1-112-01-L-D-K is a rectangular power connector with 24 contacts. It features phosphor bronze contact material with gold finish for mating and tin finish for termination. Ideal for board mounting applications requiring reliable soldered connections in power systems.
IPL1-115-01-L-D-RA-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
IPL1-103-01-L-S-K
IPL1-102-02-L-D-K
IPL1-104-01-L-D-RA-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Type: BOARD;
IPL1-105-01-L-D-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Plating Thickness (inch): 10u;
IPL1-110-01-L-D-K
Samtec's IPL1-110-01-L-D-K is a rectangular power connector with 20 contacts, rated at 5A signal current. It features a mating contact pitch of 0.1", dielectric voltage withstand of 675VAC, and operates b/w -55°C to 125°C. Ideal for board mounting applications in commercial settings.
IPL1-110-01-L-S-K
Samtec's IPL1-110-01-L-S-K is a rectangular power connector with 10 contacts. It features phosphor bronze contact material with gold over nickel finish. Ideal for board mounting applications, this connector has liquid crystal polymer insulator and solder termination.
IPL1-120-01-L-D-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Termination Type: SOLDER; JESD-609 Code: e3;
IPL1-120-01-L-D-RA-K
Samtec IPL1-120-01-L-D-RA-K is a rectangular power connector with 40 contacts, featuring phosphor bronze contact material and gold over nickel mating finish. With liquid crystal polymer insulator, it operates b/w -55 to 125°C, making it ideal for board mounting in commercial applications requiring reliable power connections.
IPL1-115-01-L-D-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POLARIZED; Mixed Contacts: NO; Total No. of Contacts: 30;
IPL1-107-01-L-D-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: PHOSPHOR BRONZE; Manufacturer Series: IPL1; Mounting Type: BOARD;
IPL1-110-01-L-D-RA-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: TIN OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved