Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Samtec HSEC8-120-01-SM-DV-A is a card edge connector with 40 contacts, featuring a mating contact pitch of 0.032", insulation resistance of 1Gohm, and rated current of 2.8A. Ideal for board mounting applications in commercial settings, it offers durability up to 1000 cycles and operates b/w -55°C to 125°C temperature range.
Median Price
$3.948
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$3.840
100+ parts
$3.810
1k+ parts
$2.860
10k+ parts
$2.500
DigiKey
$20.450
-
Chip1Stop
$2.370
Arrow
$4.057
$2.705
$1.921
Master Electronics
$3.760
$2.790
$2.430
Verical
$5.934
Nova Conductors
$2.530
Chip Stock
Vyrian
Odi Ramu Company
Halfin
IBS Electronics
$3.071
TME
$4.260
Prism Electronics
Aranea Global
$2.479
$2.380
Argo Parts USA
Aztec Data Supply Inc.
$3.434
Continental Prestige Electronics
$5.640
$3.850
$3.000
Corohmni
$8.745
Speed Components Ltd (Excess)
Authorized Procurement Solutions
Perfect Parts
The close contact pitch allows for secure connections and ensures reliable signal transmission.
The optimal length provides sufficient space for the contacts while keeping the overall size compact.
High insulation resistance ensures minimal signal loss and prevents interference between contacts.
The narrow body width allows for space-saving installation without compromising on connection stability.
Tin with a nickel barrier provides a reliable and durable termination finish for long-lasting performance.
The appropriate body depth accommodates the contacts securely while maintaining a streamlined design.
Liquid crystal polymer offers excellent heat resistance and mechanical strength for reliable operation in various conditions.
Having two rows loaded allows for increased connectivity options and versatility in use.
With a high maximum operating temperature, this product can withstand elevated temperatures without performance degradation.
The low minimum operating temperature ensures reliable performance even in cold environments.
The adequate plating thickness offers corrosion resistance and prolongs the connector's lifespan.
Having two PCB rows provides enhanced connectivity options and flexibility in circuit design.
The card edge connector design allows for easy and secure insertion and removal of PCBs.
Beryllium copper ensures good conductivity and durability, making it suitable for long-term use.
Gold mating contact finish offers excellent conductivity and minimal signal loss for reliable connections.
The high rated current allows for the transmission of robust signals without the risk of overload.
The black insulator color provides a sleek and professional appearance to the connector.
Having a high number of contacts enables complex connectivity solutions and compatibility with a wide range of devices.
Having one connector simplifies installation and minimizes potential points of failure.
With a durability of 1000 cycles, this product can withstand frequent mating and unmating cycles without compromising performance.
The board mounting type allows for secure attachment to the PCB for stable connections.
The precise terminal pitch enables accurate connections and compatibility with a wide range of devices.
Surface mount termination offers easy and efficient installation on PCBs for streamlined assembly.
Female contact gender ensures compatibility with corresponding male connectors for reliable connections.
Low contact resistance enables efficient signal transmission and reduces the risk of signal distortion.
The straight mounting style simplifies installation and ensures a secure fit for stable connections.
The bellowed contact style offers flexibility and tolerance for secure connections even in challenging environments.
The locking mounting option provides additional security and stability to prevent accidental disconnection.
Designed for commercial applications, this connector offers reliable performance and durability in demanding environments.
Headers & Edge Type Connectors HSEC8-120-01-SM-DV-A attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Rated Current - Signal:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
HSEC8-120-01-SM-DV-A Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Itt Semiconductor
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
XHP-2-BK
J S T Mfg
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Manufacturer Series: XH; Mating Contact Finish: NOT SPECIFIED;
640456-3
TE Connectivity
TE Connectivity 640456-3 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. Featuring TIN termination finish, it has a rated current of 5A and operates b/w -55 to 105°C. Ideal for use in electronics requiring a male contact gender with straight mounting style.
TMM-106-01-L-S
Samtec
The Samtec TMM-106-01-L-S is a board connector with 6 contacts, featuring a mating contact pitch of 0.079", matte tin termination finish, and phosphor bronze contact material. It has a max operating temperature of 125°C and min of -55°C, making it suitable for commercial applications requiring reliable signal transmission on PCBs with rectangular contact patterns.
R
Aw Industries
R by Aw Industries is a DIN and IEC conformant BOARD EURO CONNECTOR with 2.54mm Terminal Pitch. It supports PRESS FIT, SOLDER, WIRE WRAP terminations for FEMALE and MALE contacts. Ideal for applications requiring RIGHT ANGLE or STRAIGHT mounting on board or panel setups.
S4B-XH-A(LF)(SN)
S4B-XH-A(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.098" mating contact pitch, suitable for applications requiring a max operating temperature of 85°C and min of -25°C. It features brass contacts with tin finish, UL94V-0 flammability rating, and insulation resistance of 1Gohm. Ideal for right-angle mounting on boards in various electronic devices.
DF11-18DS-2C
Hirose Electric
DF11-18DS-2C by Hirose Electric is a 2-row board connector with 18 contacts, rated at 2A signal current. It features a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for commercial applications requiring durable connectors with crimp termination and black insulator color.
M20-9990206
Harwin Plc
M20-9990206 by Harwin PLC is a board connector with 0.1" mating contact pitch, 1000000000000 ohm insulation resistance, and 750VAC dielectric voltage. It is ideal for applications requiring a durable, high-temperature resistant male receptacle connector with solder termination and 3A signal current rating.
B03B-PASK-1(LF)(SN)
B03B-PASK-1(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3A signal current rating, 0.079" contact pitch, and 800VAC dielectric voltage. Ideal for board mounting applications, it features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and tin over copper mating finish. Operating b/w -25 to 85 °C, this UL-rated connector offers high insulation resistance of 1000000000 ohm.
S4B-PH-K-S(LF)(SN)
S4B-PH-K-S(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C and insulation resistance of 1Gohm. It features brass contacts with tin finish, UL94V-0 flammability rating, and press-fit termination for signal currents up to 2A.
B4B-PH-K-S(LF)(SN)
B4B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator material and BRASS contact material. Ideal for applications requiring a male SQ PIN-SKT contact style on a RECTANGULAR PCB pattern.
1-281739-0
TE Connectivity 1-281739-0 is a POLYETHYLENE insulator BOARD CONNECTOR with 20 contacts, rated at 3A. It has a polarization key and operates b/w -40 to 100 °C. The connector features tin termination finish, UL94V-0 flammability rating, and is suitable for applications requiring high insulation resistance.
MTSW-102-07-G-S-240
Samtec's MTSW-102-07-G-S-240 is a board stacking connector with 0.1" pitch, gold-plated contacts, and glass-filled polyester insulator. Ideal for commercial applications, it features 2.54mm terminal pitch, solder termination, and male contact gender for reliable PCB connections.
2103
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; MIL Conformity: NO; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
B2B-ZR(LF)(SN)
B2B-ZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" mating contact pitch, 500VAC dielectric voltage, and 1A signal current rating. Ideal for applications requiring a polarized housing, this connector features GLASS FILLED POLYAMIDE66 insulation material and solder termination for reliable performance in temperatures ranging from -25 to 85 °C.
53398-0771
Molex
The Molex 53398-0771 header connector features a mating contact pitch of 0.049", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. Ideal for board mounting with solder holding posts, this connector is designed for applications requiring a durable, polarized male connector with a total of 7 contacts.
67910-0002
Molex 67910-0002 is a Card Edge Connector with 52 contacts, 0.031" pitch, and 0.8mm terminal pitch. It features Liquid Crystal Polymer insulator material and gold termination finish. Ideal for board mounting applications requiring a reliable right-angle connection with UL94V-0 flammability rating.
B06B-PASK-1(LF)(SN)
B06B-PASK-1(LF)(SN) by J S T Mfg is a 6-contact board connector with 0.079" pitch, suitable for applications requiring a rated current of 3A. Featuring a dielectric voltage of 800VAC and insulation resistance of 1Gohm, it has a temperature range from -25 to 85°C, making it ideal for various electronic devices.
103948-9
TE Connectivity 103948-9 is a board connector with 10 contacts, 0.1" pitch, and 3A signal rating. It features POLYETHYLENE insulation, tin/lead finish, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with latching mounting options.
VHR-6N-M
VHR-6N-M by J S T Mfg is a 6-contact board connector with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation, it has an operating temperature range of -25 to 85 °C. Ideal for commercial applications, this connector supports wire sizes from 22 to 18 AWG and offers high insulation resistance at 1000000000 ohm.
43650-0212
The Molex 43650-0212 is a board connector with 0.118" mating contact pitch, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 100u plating thickness. Ideal for applications requiring a durable male connector with 5A signal current rating, operating b/w -40 to 105°C in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSEC8-160-01-L-DV-A-BL
Samtec HSEC8-160-01-L-DV-A-BL is a 120-contact card edge connector with 0.032" pitch, suitable for board mounting. It features liquid crystal polymer insulation, matte tin over nickel finish, and can handle up to 2.8A signal current. Ideal for commercial applications requiring durability and reliability in temperatures ranging from -55°C to 125°C.
HSEC8-190-01-L-DV-A-WT
CARD EDGE CONNECTOR; Reliability: COMMERCIAL; No. of Connectors: ONE; Plating Thickness (inch): 10u; No. of Rows Loaded: 2; Maximum Operating Temperature (Cel): 125;
HSEC8-190-01-L-DV-A-WT-K
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 720VAC; No. of Connectors: ONE; No. of Rows Loaded: 2;
HSEC8-125-01-L-DV-A-K-TR
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR; Body Width: .276 inch;
HSEC8-110-01-S-DV-A
Samtec's HSEC8-110-01-S-DV-A is a 2-row card edge connector with 20 contacts, rated for 1000 cycles. It features a mating contact pitch of 0.032", insulation resistance of 1Gohm, and operates b/w -55°C to 125°C. Ideal for board mounting applications requiring high durability and reliability in commercial settings.
HSEC8-120-01-L-DV-A-WT-K
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 720VAC; No. of Connectors: ONE; Total No. of Contacts: 40;
HSEC8-110-01-SM-DV-A
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER;
HSEC8-125-01-L-DV-A-WT
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 50;
HSEC8-130-01-L-DV-A-WT
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: STRAIGHT;
HSEC8-180-01-L-DV-A-WT
Samtec's HSEC8-180-01-L-DV-A-WT is a 160-contact card edge connector with 0.032" pitch, suitable for board mounting. It features liquid crystal polymer insulation, beryllium copper contacts with gold plating, and can handle up to 2.8A signal current. Ideal for commercial applications requiring durability and reliability in temperatures ranging from -55°C to 125°C.
HSEC8-130-01-L-DV-A-WT-K
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 720VAC; No. of Connectors: ONE; Body Length: 1.126 inch;
HSEC8-140-01-L-DV-A
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
HSEC8-120-01-L-DV-A-WT
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body or Shell Style: SOCKET;
HSEC8-120-01-S-DV-A
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; No. of PCB Rows: 2;
HSEC8-110-01-L-DV-A-WT-K
Samtec's HSEC8-110-01-L-DV-A-WT-K is a 20-contact card edge connector with 0.031" pitch, suitable for PCB mounting. With a dielectric voltage of 720VAC and operating temperature range from -55 to 125°C, it offers high insulation resistance of 1Gohm. Ideal for applications requiring reliable signal transmission at rated current of 2.8A in black insulator color and liquid crystal polymer material.
HSEC8-130-01-L-RA
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: BOARD; Body Length: 1.284 inch;
HSEC8-120-01-L-DV-A-WT-K-FR
CARD EDGE CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
HSEC8-125-01-L-DV-A-K
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Style: BELLOWED TYPE;
HSEC8-130-01-L-PV-2-2-WT
CARD EDGE CONNECTOR; Reliability: COMMERCIAL; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER; Contact Resistance: 15 mohm; Maximum Operating Temperature (Cel): 125;
HSEC8-120-01-SM-DV
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): 30u;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved