Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 720VAC; No. of Connectors: ONE; Total No. of Contacts: 40;
Median Price
$2.862
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Argo Parts USA
Continental Prestige Electronics
$2.805
AZTECH Wire
$3.000
$2.880
$2.820
$2.770
Headers & Edge Type Connectors HSEC8-120-01-L-DV-A-WT-K attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Termination Contact Finish:
Contact Gender:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Filter Feature:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
HSEC8-120-01-L-DV-A-WT-K Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
Transys Electronics
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Sensitron Semiconductor
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
Sangdest Microelectronics (Nanjing)
LM358N
5011892010
Molex
Molex 5011892010 is a 20-contact board connector with 0.039" pitch, POLYAMIDE insulator, and -40 to 105°C operating range. Ideal for cable mounting applications requiring female contacts in a straight receptacle design.
B2B-XH-A-E(LF)(SN)
J S T Mfg
B2B-XH-A-E(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for commercial applications, this connector has a rated current of 3A and operates b/w -25 to 85 °C temperatures.
50-57-9008
The Molex 50-57-9008 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It features glass-filled polyester insulator material and UL 94V-0 flammability code. Ideal for commercial applications requiring an 8-contact female connector with crimp termination on cables.
XHP-2-R
XHP-2-R by J S T Mfg is a BOARD CONNECTOR with 2 contacts, UL 94V-0 rated. It features FEMALE contacts for CRIMP termination and is ideal for CABLE mounting applications.
XF2M-4015-1A
Omron
Omron XF2M-4015-1A is a 40-contact FFC/FPC connector with 0.020" pitch, GOLD OVER NICKEL finish, and 250VAC voltage rating. Ideal for board mounting applications in commercial settings, it offers high durability with 20 cycles and operates b/w -30°C to 85°C temperature range.
ZHR-2
ZHR-2 by J S T Mfg is a 2-contact BOARD CONNECTOR with a mating contact pitch of 0.059". Its compact body measures 0.134" in width and 0.189" in depth, meeting UL Flammability Code 94V-0 standards. Ideal for CABLE mounting, this CRIMP termination FEMALE connector is commonly used in electronic applications requiring reliable connections.
BM04B-GHS-TBT(LF)(SN)(N)
BM04B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, 0.049" pitch, and 100000000 ohm insulation resistance. It has POLYAMIDE9T insulator material, operates b/w -25 to 85 °C, and features TIN/CU termination finish. Ideal for applications requiring a male contact gender in surface mount configuration with a rectangular PCB contact pattern.
B2B-PH-K-S
B2B-PH-K-S by J S T Mfg is a BOARD CONNECTOR with BRASS contacts, 94V-0 UL rating, and TIN OVER COPPER finish. With 2 contacts on 2mm pitch, it's ideal for solder termination in straight mounting applications.
306-022-520-102
Edac
Edac 306-022-520-102 is a 22-contact card edge connector with 0.156" pitch, rated at 5A power. With POLYETHYLENE POLYESTER insulator and UL94V-0 flammability, it operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and dielectric voltage withstand capabilities.
74441-0010
Molex 74441-0010 is a board connector with 20 contacts, 0.031" mating pitch, and 0.433" body length. Ideal for commercial applications, it has a matte tin finish, operates b/w -40 to 85°C, and features a glass-filled polyethylene insulator.
XHP-11
XHP-11 by J S T Mfg is a BOARD CONNECTOR with 11 contacts, UL 94V-0 rated. It features FEMALE contacts for CABLE mounting with CRIMP termination. Ideal for applications requiring reliable edge type connectors in electronic assemblies.
502
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; DIN Conformance: NO; MIL Conformity: NO;
26-60-6100
The Molex 26-60-6100 is a board connector with 10 contacts, featuring a dielectric voltage of 1000VAC and insulation resistance of 1Gohm. With a temperature range from -40 to 80°C, it is ideal for commercial applications requiring reliable connections in headers & edge type connectors.
DT06-6S-CE05
Deutsch
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Manufacturer Series: DT;
DF11-4DS-2C
Hirose Electric
The Hirose Electric DF11-4DS-2C is a 2-row board connector with 4 contacts, featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring a durable socket-style connector with crimp termination, suitable for commercial use in environments ranging from -30 to 85°C.
50-37-5023
The Molex 50-37-5023 is a board connector with a mating contact pitch of 0.098". It features an insulation resistance of 1G ohm and can withstand up to 1000VAC. This dual-polarized connector, suitable for commercial applications, has a rated current of 3A and operates b/w -40°C to 105°C.
DTM06-2S
TE Connectivity
TE Connectivity's DTM06-2S is a 2-contact board connector with 0.157" pitch, rated for 7.5A signal current at 250V. Its glass-filled polyamide insulator and UL94V-0 flammability rating make it ideal for cable mounting applications requiring a polarized housing and wire termination.
BM06B-GHS-TBT(LF)(SN)(N)
BM06B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.049" pitch, POLYAMIDE9T insulator, and 500VAC dielectric voltage. It operates b/w -25 to 85 °C and has a UL94V-0 flammability rating. Ideal for surface mount applications requiring male connectors with 1A signal current capacity.
518-64-2
W+p Products
518-64-2 by W+p Products is a BOARD CONNECTOR with 64 contacts, rated at 1A signal current. Featuring POLYETHYLENE insulation material, it has a dielectric voltage of 800VAC and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring a crimp termination type with female contact gender.
TSW-103-07-T-D
Samtec
Samtec's TSW-103-07-T-D is a 2-row, 6-contact board connector with a mating contact pitch of 0.1". Featuring matte tin finish and phosphor bronze contacts, it has a body width, depth, and terminal length of 0.1 inch each. Ideal for PCB applications requiring reliable male connectors with solder termination in a straight mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSEC8-160-01-L-DV-A-BL
Samtec HSEC8-160-01-L-DV-A-BL is a 120-contact card edge connector with 0.032" pitch, suitable for board mounting. It features liquid crystal polymer insulation, matte tin over nickel finish, and can handle up to 2.8A signal current. Ideal for commercial applications requiring durability and reliability in temperatures ranging from -55°C to 125°C.
HSEC8-190-01-L-DV-A-WT
CARD EDGE CONNECTOR; Reliability: COMMERCIAL; No. of Connectors: ONE; Plating Thickness (inch): 10u; No. of Rows Loaded: 2; Maximum Operating Temperature (Cel): 125;
HSEC8-190-01-L-DV-A-WT-K
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 720VAC; No. of Connectors: ONE; No. of Rows Loaded: 2;
HSEC8-125-01-L-DV-A-K-TR
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR; Body Width: .276 inch;
HSEC8-110-01-S-DV-A
Samtec's HSEC8-110-01-S-DV-A is a 2-row card edge connector with 20 contacts, rated for 1000 cycles. It features a mating contact pitch of 0.032", insulation resistance of 1Gohm, and operates b/w -55°C to 125°C. Ideal for board mounting applications requiring high durability and reliability in commercial settings.
HSEC8-110-01-SM-DV-A
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER;
HSEC8-125-01-L-DV-A-WT
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 50;
HSEC8-130-01-L-DV-A-WT
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: STRAIGHT;
HSEC8-180-01-L-DV-A-WT
Samtec's HSEC8-180-01-L-DV-A-WT is a 160-contact card edge connector with 0.032" pitch, suitable for board mounting. It features liquid crystal polymer insulation, beryllium copper contacts with gold plating, and can handle up to 2.8A signal current. Ideal for commercial applications requiring durability and reliability in temperatures ranging from -55°C to 125°C.
HSEC8-130-01-L-DV-A-WT-K
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 720VAC; No. of Connectors: ONE; Body Length: 1.126 inch;
HSEC8-140-01-L-DV-A
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
HSEC8-120-01-L-DV-A-WT
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body or Shell Style: SOCKET;
HSEC8-120-01-S-DV-A
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; No. of PCB Rows: 2;
HSEC8-120-01-SM-DV-A
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 40;
HSEC8-110-01-L-DV-A-WT-K
Samtec's HSEC8-110-01-L-DV-A-WT-K is a 20-contact card edge connector with 0.031" pitch, suitable for PCB mounting. With a dielectric voltage of 720VAC and operating temperature range from -55 to 125°C, it offers high insulation resistance of 1Gohm. Ideal for applications requiring reliable signal transmission at rated current of 2.8A in black insulator color and liquid crystal polymer material.
HSEC8-130-01-L-RA
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: BOARD; Body Length: 1.284 inch;
HSEC8-120-01-L-DV-A-WT-K-FR
CARD EDGE CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
HSEC8-125-01-L-DV-A-K
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Style: BELLOWED TYPE;
HSEC8-130-01-L-PV-2-2-WT
CARD EDGE CONNECTOR; Reliability: COMMERCIAL; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER; Contact Resistance: 15 mohm; Maximum Operating Temperature (Cel): 125;
HSEC8-120-01-L-DV-TR
CARD EDGE CONNECTOR; Reliability: COMMERCIAL; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: BERYLLIUM COPPER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved