Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM SML-P12YTT86 is a 0.6mm SINGLE COLOR LED with 130.0mcd luminous intensity, 0.02A forward current, and yellow color. Ideal for surface mount applications in visible LEDs category, it operates b/w -40 to 85°C temperatures.
Median Price
$0.306
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.370
100+ parts
$0.179
1k+ parts
$0.134
10k+ parts
$0.115
Verical
-
$0.241
$0.222
Bristol Electronics
$0.563
$0.225
Component Sense
R&J Components
TME
$0.093
$0.085
NAC Semi
$0.109
Vyrian
Chip Stock
Elcom Components
ACDS - Activité Composants Distribution Service
Semtec, LLC
Semi Source
Nova Conductors
Ampacity Inc.
$0.075
CoreStaff
$0.417
$0.159
$0.092
Advanced Electronics
$0.570
$0.519
$0.467
Assy Fe
Futuretech Components
Continental Prestige Electronics
Cyclops Electronics Ltd (Excess)
Argo Parts USA
Aranea Global
Formix International (Excess)
Single configuration simplifies the design and offers easy integration into various applications.
Compact size saves space in the design and allows for applications with limited space constraints.
Efficient operation with low forward current consumption for energy savings.
Clear lens type ensures maximum light transmission and brightness.
Single color LED provides consistent output for specific color requirements with high reliability.
Simple two-terminal connection for easy integration and circuit design.
High maximum operating temperature range for versatile use in various environments.
Low profile height for compact designs and surface mount applications.
Square shape offers uniform light distribution and easy alignment during assembly.
Wide minimum operating temperature range for reliable performance in extreme conditions.
Gold terminal finish with nickel barrier ensures good conductivity and corrosion resistance.
Vibrant yellow color output for applications requiring a specific color.
Tape and reel packing for convenient handling and automated assembly.
Optimal terminal pitch for easy soldering and connection in the circuit.
High luminous intensity output for bright and visible lighting applications.
Surface mount feature for easy and secure attachment to PCBs or other surfaces.
Visible LEDs SML-P12YTT86 attributes and parameters. Explore more Visible LEDs devices from ROHM
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Shape:
Size:
Terminal Finish:
Terminal Pitch:
SML-P12YTT86 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
Uniohm
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LTST-C191KRKT
Lite-on Technology
LTST-C191KRKT by Lite-on Technology is a 1.1mm WATER CLEAR LED with peak wavelength of 639nm, emitting RED light at 54.0mcd luminous intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55 to 85°C, making it suitable for various electronic devices.
HSMG-C190
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
KP-3216SGC
Kingbright Electronic
Kingbright Electronic's KP-3216SGC is a 2mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.025A, it offers super bright green light ideal for surface mount applications in electronics.
CMD15-21VGC/TR8
Visual Communications Company
CMD15-21VGC/TR8 by Visual Communications Company is a 2mm single color LED with peak wavelength of 570nm. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications, this green LED operates b/w -40 to 85 °C, offering clear lens and rectangular shape.
APHHS1005SURCK
Kingbright Electronic's APHHS1005SURCK is a 0.8mm SINGLE COLOR LED with peak wavelength of 650nm. It has a max forward current of 0.03A and viewing angle of 120°. Ideal for surface mount applications, this HYPER RED LED operates b/w -40 to 85 °C, with a luminous intensity of 140.0mcd.
SSL-LX5093IGW
Lumex
The Lumex SSL-LX5093IGW is a 5mm dual-color LED with red/green colors, diffused milky white lens, and common bipolar terminal. It has a max forward current of 0.03A, peak wavelengths of 635nm/565nm, and nominal luminous intensity of 30.0/20.0 mcd. Ideal for applications requiring radial mounting such as indicator lights in electronic devices.
ASMT-RF45-AN002
Broadcom
ASMT-RF45-AN002 by Broadcom is a 1.1mm SINGLE COLOR LED with peak wavelength of 574nm and max forward current of 0.02A. Ideal for applications requiring YELLOW GREEN light emission, it has a viewing angle of 145° and operates b/w -40°C to 100°C temperatures.
KPT-2012CGCK
KPT-2012CGCK by Kingbright Electronic is a 1.3mm green LED with a peak wavelength of 574nm and a min luminous intensity of 120cd. It is suitable for surface mount applications and has a max forward current of 0.03A.
HLMP-1719
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Additional Features: HIGH RELIABILITY;
LTST-C195KGJRKT
LTST-C195KGJRKT by Lite-on Technology is a 1.5mm DUAL COLOR LED with WATER CLEAR lens, featuring RED/GREEN colors and peak wavelengths of 639nm/574nm. It has a max forward current of 0.03A and viewing angle of 130°, suitable for surface mount applications in various electronic devices due to its compact size and high luminous intensity.
Fairchild Semiconductor
Fairchild Semiconductor's HLMP-1719 is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.0075A and forward voltage of 2.7V, suitable for applications requiring diffused yellow light emission in visible LEDs category.
150141RS73100
Wuerth Elektronik & Kg
150141RS73100 by Wurth Elektronik is a single color LED with peak wavelength of 630nm and max forward current of 0.03A. With a viewing angle of 120°, it's ideal for applications requiring red light emission in compact spaces. This surface mount LED operates b/w -40 to 85°C, making it suitable for various lighting projects.
HLMP-1700
HLMP-1700 by Fairchild Semiconductor is a 3mm single color LED with a peak wavelength of 635nm and a max forward current of 0.0075A. It is commonly used in applications that require high efficiency red light emission, such as indicator lights or displays.
LTST-C191KGKT-5A
LTST-C191KGKT-5A by Lite-on Technology is a 1.1mm GREEN SINGLE COLOR LED with a peak wavelength of 574nm and a viewing angle of 130°. It is ideal for surface mount applications requiring a max forward current of 0.03A and an operating temperature range from -55 to 85 °C.
XHP35B-00-0000-0D0BE240E
Wolfspeed
SINGLE COLOR LED;
XHP35B-00-0000-0D0UB230G
150141BS73100
150141BS73100 by Wurth Elektronik is a 2.4mm BLUE LED with peak wavelength of 465nm, forward current of 0.03A, and luminous intensity of 270.0mcd. Ideal for surface mount applications in electronics, offering a wide viewing angle of 120° and operating temperatures from -40°C to 85°C.
150060YS75000
150060YS75000 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 595nm and viewing angle of 140°. It has a size of 1.1mm, operates b/w -40 to 85 °C, and is ideal for surface mount applications requiring a single color light source.
HLMP-1790-A00A2
Broadcom's HLMP-1790-A00A2 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a radial mount visible LED with a viewing angle of 50°.
OVLLR8C7
Optek Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 570.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 633;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SML-P11MTT86R
ROHM
ROHM SML-P11MTT86R is a surface mount single color LED with max forward current of 0.02A, clear lens, and green-yellow color at wavelength. It operates b/w -40°C to 85°C, ideal for applications requiring compact and efficient lighting solutions.
SML-P11MTT86RG
ROHM SML-P11MTT86RG is a 0.6mm SINGLE COLOR LED with 1.9V forward voltage and 1.3mcd luminous intensity. Ideal for surface mount applications, it operates b/w -40 to 85°C, emitting YELLOWISH GREEN light at 0.02A forward current.
SML-P11MTT86RH
ROHM SML-P11MTT86RH is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A and max. forward voltage of 1.9V. Ideal for surface mount applications, it emits YELLOWISH GREEN light with min. luminous intensity of 0.0016cd, suitable for TR packing method in optoelectronics at -40 to 85°C operating temp range.
SML-P11MTT86
ROHM SML-P11MTT86 is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A, emitting YELLOW GREEN light at 2.1mcd intensity. Ideal for surface mount applications in electronics due to its small size and color clarity.
SML-P11UTT86R
ROHM SML-P11UTT86R is a 0.6mm SINGLE COLOR LED with 0.02A forward current, emitting RED light at 2.5mcd luminous intensity. Ideal for surface mount applications in electronics due to its small size and color clarity.
SMLP36RGB2W3R
ROHM's SMLP36RGB2W3R is a 1.5mm TRIPLE COLOR LED with SEPARATE, 3 ELEMENTS configuration. It has a max forward current of 0.01A and operates b/w -40 to 85°C. Ideal for surface mount applications requiring red, green, and blue light outputs in compact electronic devices.
SMLP36RGB2W3RA
ROHM's SMLP36RGB2W3RA is a 1.5mm TRIPLE COLOR LED with SEPARATE, 3 ELEMENTS configuration. It has a max forward current of 0.01A and operates b/w -40 to 85°C. Ideal for applications requiring red, green, and blue light outputs in compact designs.
SMLP36RGB2W3RD
ROHM SMLP36RGB2W3RD is a 1.5mm TRIPLE COLOR LED with SEPARATE configuration. It has a max forward current of 0.01A and operates b/w -40 to 85°C. Ideal for applications requiring RGB illumination in compact spaces like consumer electronics and automotive lighting.
SML-P11UTT86RH
ROHM SML-P11UTT86RH is a 0.6mm SINGLE COLOR LED with 1.8V max forward voltage, ideal for applications requiring red light emission. With a max forward current of 0.02A and operating temperature range from -40 to 85°C, it offers high luminous intensity at 2.05mcd in a compact square shape for surface mount assembly.
SML-P11UTT86RJ
ROHM SML-P11UTT86RJ is a 0.6mm SINGLE COLOR LED with 2 terminals. It has a max forward current of 0.02A and operates b/w -40 to 85°C. Ideal for surface mount applications requiring a red light source with 3.25mcd luminous intensity.
SML-P24MUWT86R
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 52.0/21.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-P11VTT86R
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; Lens Type: CLEAR; Terminal Finish: GOLD OVER NICKEL; Color At Wavelength: Red; Maximum Operating Temperature: 85 Cel;
SMLP12BC7TT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-P24MUWT86RNR
DUAL COLOR LED;
SML-P11UTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.5; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SMLP34RGB2W3
TRIPLE COLOR LED; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4;
SMLP34RGB2W3C
SML-P11YTT86R
ROHM SML-P11YTT86R is a 0.6mm SINGLE COLOR LED with max forward current of 0.02A and max forward voltage of 2.1V. Ideal for applications requiring YELLOW light emission, such as indicator lights in electronic devices due to its small size and clear lens design.
SML-P12UTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 85.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-P12VTT86R
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 81.5; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved