Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM's SML-512MWT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 570nm, forward current of 0.025A, and luminous intensity of 40.0mcd. Ideal for surface mount applications in visible LEDs category, it emits YELLOW GREEN light with MILKY WHITE lens for various electronic devices.
Median Price
$9.118
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
$18.100
1k+ parts
$13.600
10k+ parts
$11.700
Verical
$0.136
Bristol Electronics
$0.649
$0.325
$0.130
$0.081
Dan-Mar Components
Rutronik
$0.078
IBS Electronics
$0.108
Netsource Technology, Inc.
ComSIT Distribution GmbH
Component Sense
Semi Source
Connector Distribution Corp
Right Parts Inc.
Prism Electronics
A2Z Electronics, Inc.
Nova Conductors
Resion
Ampacity Inc.
$0.105
Perfect Parts
Kepictronics
GreenTree Electronics
Argo Parts USA
Aranea Global
Continental Prestige Electronics
Speed Components Ltd (Excess)
SINGLE configuration helps in simplifying the design and controlling the light output efficiently.
Compact size allows for easy integration into a variety of applications without taking up much space.
Low forward current consumption ensures energy efficiency and longer product lifespan.
Peak wavelength of 570 nm provides a vibrant yellow-green color output for visual applications.
Milky white lens type helps in diffusing the light evenly and reducing hotspots for a consistent illumination.
Single color LED simplifies the application by producing only one color output, ideal for specific lighting needs.
Having 2 terminals makes it easy to connect and integrate the LED into circuits or PCBs.
High maximum operating temperature of 85°C ensures stable performance in various environmental conditions.
Low height profile makes it suitable for compact designs and applications with limited vertical space.
Rectangular shape provides a uniform distribution of light output and easy alignment during installation.
Low minimum operating temperature of -30°C allows the LED to function reliably even in cold environments.
Gold over nickel terminal finish ensures excellent conductivity, corrosion resistance, and durability for long-lasting performance.
Yellow-green color output adds a unique visual appeal and can be used for signaling, indication, or decorative purposes.
TR packing method provides protection during transportation and storage, ensuring the quality of the product.
Terminal pitch of 1.65 mm makes it compatible with standard mounting configurations and PCB layouts.
High nominal luminous intensity of 40.0 mcd results in a bright and visible light output for effective illumination.
Surface mounting feature allows for easy and secure installation on PCBs or other surfaces for convenient usage.
Visible LEDs SML-512MWT86 attributes and parameters. Explore more Visible LEDs devices from ROHM
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Finish:
Terminal Pitch:
SML-512MWT86 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
LTL4233
Taiwan Liton Electronic C
LTL4233 by Taiwan Liton Electronic C is a 5mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.03A, it emits green light at 8.7mcd luminous intensity. Ideal for applications requiring diffused lighting in electronic devices due to its radial mount feature and T-1 3/4 package design.
HLMP-4740
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
ASMT-RF45-AN002
Broadcom
ASMT-RF45-AN002 by Broadcom is a 1.1mm SINGLE COLOR LED with peak wavelength of 574nm and max forward current of 0.02A. Ideal for applications requiring YELLOW GREEN light emission, it has a viewing angle of 145° and operates b/w -40°C to 100°C temperatures.
TLHK5800
Vishay Intertechnology
Vishay Intertechnology's TLHK5800 is a 5mm red LED with peak wavelength of 643nm, forward current of 0.03A, and luminous intensity of 2500mcd. Ideal for applications requiring single color illumination in environments ranging from -40°C to 100°C.
XHP50B-00-0000-0D0BJ40E3
Wolfspeed
SINGLE COLOR LED;
VLMTG1300-GS08
VLMTG1300-GS08 by Vishay Intertechnology is a 1.1mm TRUE GREEN LED with peak wavelength of 530nm, forward current of 0.02A, and forward voltage of 3.6V. Ideal for surface mount applications in electronics due to its compact size and high luminous intensity of 260.5mcd at a wide viewing angle of 130°.
HSMQ-C190
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 145.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
597-3301-502F
Dialight
Dialight's 597-3301-502F is a single color LED with peak wavelength of 570nm and forward voltage of 2.8V. Ideal for surface mount applications, it has a viewing angle of 110° and luminous intensity of 25.0mcd, making it suitable for indicator lights in various electronic devices.
Quality Technologies
SINGLE COLOR LED; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .0075 A; Size: 5 mm; Color: HIGH EFFICIENCY GREEN; Maximum Operating Temperature: 100 Cel;
KP-1608CGCK
Kingbright Electronic
Kingbright Electronic's KP-1608CGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 574nm, max forward current of 0.03A, and water clear lens. Ideal for applications requiring green light emission in compact spaces due to its small size and surface mounting feature.
MLCAWT-A1-0000-000XE1
Wolfspeed's MLCAWT-A1-0000-000XE1 is a surface mount single color LED with max. forward current of 0.35A, height of 1.2mm, and min. luminous intensity of 120cd. Ideal for applications requiring cool white light at a wavelength, with max. reverse voltage of 5V and forward voltage of 3.4V in bulk packaging.
150044M155260
Wuerth Elektronik & Kg
Visible LEDs;
MLCAWT-H1-0000-000XE3
Wolfspeed's MLCAWT-H1-0000-000XE3 is a single color LED with max forward current of 0.35A and height of 1.2mm. Ideal for applications requiring white light at 120cd luminous intensity, it operates up to 150°C, with max forward voltage of 3.4V and reverse voltage of 5V.
5310F5
Chicago Miniature Lighting
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 16.0; Height: 14.732 mm; Size: 3 mm;
HSMF-C116
HSMF-C116 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 631/520/466 nm. It has a max forward current of 0.01 A and nominal luminous intensities of 80.0/220.0/45.0 mcd, suitable for surface mount applications requiring red/green/blue illumination in compact devices.
HLMP-1503
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.0; Lens Type: TINTED DIFFUSED; Maximum Reverse Voltage: 5 V;
SML-D12M8WT86C
ROHM
ROHM's SML-D12M8WT86C is a 1.2mm SINGLE COLOR LED with max forward current of 0.02A and max forward voltage of 2.2V. Ideal for surface mount applications, it emits yellowish green light with luminous intensity of 25.0mcd, suitable for TR packing in electronics industry.
HSMF-C155
Hewlett Packard
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 9/15; Lens Type: DIFFUSED; Shape: RECTANGULAR;
XHP50B-00-0000-0D0UH20E3
OVLLB8C7
Optek Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 300.0; Lens Type: WATER CLEAR; No. of Functions: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SML-522MU8WT86
ROHM's SML-522MU8WT86 is a 1.3mm dual-color LED with separate elements, featuring max forward current of 0.02A and nominal luminous intensity of 63.0/40.0 mcd. Ideal for surface mount applications in visible LED category, it emits red/yellow-green light with milky white lens, suitable for temperatures ranging from -40 to 85°C.
SML-522MY8WT86
ROHM's SML-522MY8WT86 is a dual color LED with separate configuration and 1.3mm size. It has a max forward current of 0.02A and can operate in temperatures ranging from -40 to 85°C. This surface mount LED is suitable for various applications requiring yellow/yellowish green illumination.
SML-512DWT86T
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 205.0; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML512BC4TT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 14.0; Lens Type: TRANSPARENT CLEAR; Terminal Finish: GOLD OVER NICKEL;
SML-512MWT86R
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 81.5; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-512UWT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 63.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-521MDWT86
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 63.0/16.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML522BUNWT86
ROHM's SML522BUNWT86 is a 1.3mm DUAL COLOR LED with RED/BLUE elements, forward current of 0.02A, and forward voltage of 1.9V. Ideal for surface mount applications, it has a luminous intensity of 21.0/22.0 mcd and operates b/w -40 to 85°C temperature range.
SML-512DWT86R
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 81.5; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-521MUWT86
SML-512MWT86N
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.5; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-512MWT86P
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 32.5; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-512MWT86Q
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 51.5; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-512MWT87N
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.5; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-512MWT87P
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 32.5; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-512MWT87Q
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 51.5; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-512MWT87R
SML-512PW(A)T87AF
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.05; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-512WWT86Q
SML-512PWT86AH
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 14.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved