Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM's SLR343BC4T3F is a 3.1mm SINGLE COLOR LED with peak wavelength of 468nm and forward current of 0.03A. Ideal for applications requiring blue light emission, such as indicator lights in electronic devices due to its color and luminous intensity of 470mcd.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Nova Conductors
AZTECH Wire
$0.620
$0.600
$0.580
$0.570
Advanced Electronics
$0.940
$0.855
$0.771
Ampacity Inc.
$9.100
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Single configuration makes it easy to install and use.
Compact size allows for versatile placement in various electronic devices.
Efficient power consumption with low forward current requirement.
Blue LED with a peak wavelength of 468nm offers a vibrant blue color.
Clear lens ensures maximum light transmission for optimal visibility.
Specialized for emitting a consistent blue color.
Simplified wiring with only 2 terminals for connection.
T-1 standard size for easy compatibility with existing LED fixtures.
Wide operating temperature range ensures reliability in various environments.
Low profile design for sleek integration into devices.
Classic round shape for traditional LED applications.
Can withstand cold temperatures without compromising performance.
Durable terminal finish for long-term reliability.
Consistent blue color emission for visual appeal.
Blue LED for applications requiring a blue light source.
Bulk packaging for cost-effective purchasing and storage.
Withstands up to 5V in reverse voltage to prevent damage.
Standard terminal pitch for easy installation on PCBs.
Wide viewing angle for a broad light distribution.
High luminous intensity for a bright blue output.
Radial mount design for secure and stable installation.
Low forward voltage requirement for energy-efficient operation.
Visible LEDs SLR343BC4T3F attributes and parameters. Explore more Visible LEDs devices from ROHM
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
T-code:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
SLR343BC4T3F Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.20.00
SB
PCN Obsolescence/ EOL - Mult Dev EOL 1/Oct/2021 Mult Dev OBS-Add 1/Oct/2021
PCN Assembly/Origin - Mult Dev A/T 24/May/2021
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
FDC5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
KP-3216SRC-PRV
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 80.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
LSGT676-P7Q7-1+N7P7-24
Osram Opto Semiconductors
Osram Opto Semiconductors' LSGT676-P7Q7-1+N7P7-24 is a dual-color LED with peak wavelengths of 645nm and 572nm. It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 98.0/62.75mcd. Ideal for applications requiring super red/green colors in compact designs with surface mounting features.
ASMB-KTF0-0A306
Broadcom
Broadcom's ASMB-KTF0-0A306 is a COMMON ANODE, 3 ELEMENTS TRIPLE COLOR LED with peak wavelengths of 628/518/467nm. It has a max forward current of 0.02A and nominal luminous intensities of 490.0/1100.0/215.0mcd, suitable for applications requiring RGB illumination in compact spaces like electronic displays or indicator lights.
HLMP3962
Three-five Systems
HLMP3962 by Three-five Systems is a visible LED with peak wavelength of 565nm, max forward current of 0.03A, and diffused lens type. Ideal for applications requiring green light emission with a viewing angle of 75°. Operates b/w -20°C to 100°C, making it versatile for various lighting needs.
597-2001-213F
Dialight
Dialight's 597-2001-213F is a single color LED with peak wavelength of 643nm and forward voltage of 2.6V. Ideal for surface mount applications, it offers a viewing angle of 120° and luminous intensity of 50.0mcd, making it suitable for indicators and signage in various industries.
KPT-2012CGCK
Kingbright Electronic
KPT-2012CGCK by Kingbright Electronic is a 1.3mm green LED with a peak wavelength of 574nm and a min luminous intensity of 120cd. It is suitable for surface mount applications and has a max forward current of 0.03A.
XHP35B-00-0000-0D0BD430E
Cree Led
SINGLE COLOR LED;
SSF-LXH2103IID/4
Lumex
SINGLE COLOR LED ARRAY;
KPT-1608SGC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
SML-P11MTT86RH
ROHM
ROHM SML-P11MTT86RH is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A and max. forward voltage of 1.9V. Ideal for surface mount applications, it emits YELLOWISH GREEN light with min. luminous intensity of 0.0016cd, suitable for TR packing method in optoelectronics at -40 to 85°C operating temp range.
HSMF-C163
Agilent Technologies
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 90.0/45.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTST-C190GKTT
Lite-on Technology
LTST-C190GKTT by Lite-on Technology is a single color LED with peak wavelength of 565nm and viewing angle of 130°. With a size of 1.06mm, it has a max forward current of 0.03A making it suitable for surface mount applications in electronics requiring green light emission.
TLMG1100-GS08
Vishay Intertechnology's TLMG1100-GS08 is a 1.6mm GREEN LED with peak wavelength of 572nm, forward current of 0.03A, and forward voltage of 2.4V. Ideal for surface mount applications in visible LED displays due to its high luminous intensity of 35mcd and wide viewing angle of 160°.
SSL-LX5093IGW
The Lumex SSL-LX5093IGW is a 5mm dual-color LED with red/green colors, diffused milky white lens, and common bipolar terminal. It has a max forward current of 0.03A, peak wavelengths of 635nm/565nm, and nominal luminous intensity of 30.0/20.0 mcd. Ideal for applications requiring radial mounting such as indicator lights in electronic devices.
LGR971
Elma Electronic
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Packing Method: TR; Configuration: SINGLE; Color: GREEN;
MSL0104RGBU1
ROHM's MSL0104RGBU1 is a 5.4mm TRIPLE COLOR LED with separate configuration and built-in ZENER DIODE. It has a max forward current of 0.04A, MILKY WHITE lens, and operates b/w -40 to 85°C. Ideal for applications requiring RGB color mixing in compact designs like signage, displays, and decorative lighting.
3007
Nte Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.6; Configuration: SINGLE; Color: RED;
OVLAW4CB7
Optek Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3500.0; Lens Type: WATER CLEAR; Packing Method: TR;
LGQ971-KN-1
The Osram Opto Semiconductors LGQ971-KN-1 is a 1mm single color LED with peak wavelength of 572nm. It has a max forward current of 0.025A and operates b/w -30°C to 85°C. Ideal for surface mount applications, emitting green light at a wide viewing angle of 160°.
SML-D12P8WT86C
ROHM's SML-D12P8WT86C is a 1.2mm GREEN LED with max forward current of 0.02A and forward voltage of 2.2V. Ideal for surface mount applications, it has a min operating temp of -40°C and max operating temp of 85°C, making it suitable for various lighting solutions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLR-342VR3F
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Lens Type: DIFFUSED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Peak Wavelength (nm): 650;
SLR-342VC3F
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Lens Type: CLEAR; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); T-code: T-1;
SLR-342YC3F
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Lens Type: CLEAR; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Configuration: SINGLE;
SLR-325VCT31
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 16.0; Lens Type: TRANSPARENT; Terminal Finish: TIN SILVER COPPER;
SLR-325YYT31
ROHM's SLR-325YYT31 is a 3.2mm single color LED with a peak wavelength of 585nm and a max forward current of 0.02A. It is commonly used in visible LED applications, offering a yellow color and a viewing angle of 40°.
SLR-342VRT32P
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 16; Lens Type: DIFFUSED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SLR-343YC3F
SLR-343VC3F
ROHM's SLR-343VC3F is a 3.1mm single color LED with peak wavelength of 650nm and luminous intensity of 25.0mcd. Ideal for applications requiring red light emission, such as indicator lights in electronic devices due to its transparent lens and radial mount feature.
SLR-342VRT32
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SLR-342MG3F
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Lens Type: DIFFUSED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Height: 6.2 mm;
SLR343BCT3F
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 600.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: TIN SILVER COPPER;
SLR343BC4T3FXK
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 410.0; Lens Type: TRANSPARENT; Terminal Finish: TIN SILVER COPPER;
SLR343BC4T3FXM
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 855.0; Lens Type: TRANSPARENT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SLR343BC4TT31XJ
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 275.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SLR343BC4TT31XK
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 401.5; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SLR343BC4TT31XL
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 575.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SLR343BC4TT32XJ
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 280.0; Lens Type: TRANSPARENT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SLR343BC4TT32XK
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 410.0; Lens Type: TRANSPARENT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SLR343BC4TT32XL
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 585.0; Lens Type: TRANSPARENT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SLR343BC4TT32XM
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved