Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND LOW POWER; JESD-609 Code: e0; Characteristic Impedance: 50 ohm; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 85 Cel; Maximum Voltage Standing Wave Ratio: 1.35;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF & Microwave Amplifiers SGA-3386-TR1 attributes and parameters. Explore more RF & Microwave Amplifiers devices from Rf Micro Devices
Characteristic Impedance:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SPF-5122Z
Qorvo
Qorvo's SPF-5122Z is a GAAS RF amplifier with 11.2dB gain, operating from 50MHz to 4GHz. It has a max input power of 27dBm and operates on a 5V supply, ideal for wideband medium-power applications in RF & microwave systems.
TGA2567-SM
The Qorvo TGA2567-SM is a wide band medium power RF amplifier with 17 dB gain, operating from 2-20 GHz. It can handle up to 22 dBm CW input power and has a characteristic impedance of 50 ohms. Ideal for applications requiring high frequency amplification in environments ranging from -40°C to 85°C.
HMC311SC70ETR
Analog Devices
Analog Devices' HMC311SC70ETR is a GAAS RF amplifier with 11dB gain, operating from 0-8000MHz. It has a max input power of 10dBm and requires a 5V supply, making it ideal for wideband low-power applications in RF & microwave systems. The component is surface-mountable and operates b/w -40 to 85°C.
HMC505LP4
Analog Devices' HMC505LP4 is a RF amplifier with 24 terminals, operating from -40 to 85°C. It has a VSWR of 2, operates at frequencies b/w 6800-7400 MHz, and has a characteristic impedance of 50Ω. Ideal for narrowband low-power applications requiring surface mount technology.
HMC606LC5TR
Analog Devices' HMC606LC5TR is a wide band low power RF amplifier with 9.5 dB gain, operating from 2-18000 MHz. It has a max input power of 15 dBm and operates on a 5V supply with 95 mA current draw. Ideal for RF and microwave applications requiring high frequency amplification in compact designs.
TQP3M9008
Triquint Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; No. of Functions: 1; Construction: COMPONENT;
HMC532LP4E
Hittite Microwave
WIDE BAND LOW POWER; Terminal Finish: Matte Tin (Sn); Minimum Operating Frequency: 7100 MHz; Minimum Operating Temperature: -40 Cel; Maximum Voltage Standing Wave Ratio: 2; Construction: COMPONENT;
ZX60-2411BM-S
Mini-circuits
ZX60-2411BM-S by Mini-circuits is a COAXIAL RF amplifier with 9 dB Gain, 50 ohm Impedance, and 1.65 VSWR. Ideal for NARROW BAND LOW POWER applications in the frequency range of 1900-2400 MHz.
AMMP-6220
Agilent Technologies
WIDE BAND LOW POWER; Maximum Operating Frequency: 20000 MHz; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 6000 MHz; Construction: COMPONENT; Gain: 18 dB;
HMC478MP86ETR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: SL,4GW-LD,.085CIR;
HMC441LC3B
Analog Devices' HMC441LC3B is a wide band medium power RF amplifier with 10 dB gain, operating from 6-18 GHz. It has a max input power of 15 dBm and operates on a 5V supply, drawing 115 mA. Ideal for RF & microwave applications requiring high performance in plastic/epoxy package.
MGA-81563-TR2G
Broadcom
Broadcom's MGA-81563-TR2G is a GAAS RF amplifier with 10.5 dB gain, operating from 100 MHz to 6 GHz. It has a max input power of 13 dBm and VSWR of 2, suitable for wideband low-power applications in temperatures ranging from -40°C to 85°C. The component features surface mounting and requires a 3V power supply with a max current draw of 51 mA.
HMC453ST89ETR
HMC453ST89ETR by Analog Devices is a wide band medium power RF amplifier with a max operating temperature of 85°C and a min operating temperature of -40°C. It has 1 function, operates on a 5V power supply, and is surface mountable. This amplifier is commonly used in RF and microwave applications.
HMC478MP86E
Analog Devices' HMC478MP86E is a wide band low power RF amplifier with 11 dB gain and 50 ohm impedance. It operates from 0 to 4000 MHz, handles up to 5 dBm input power, and has a compact surface mount package ideal for RF applications in temperatures ranging from -40 to 85°C.
HMC327MS8G
Analog Devices' HMC327MS8G is a wide band medium power RF amplifier with 17 dB gain, operating from 3-4 GHz. It has a max input power of 16 dBm and operates b/w -40 to 85°C. Ideal for RF & microwave applications requiring surface mount components in plastic/epoxy package.
SGA3563Z
SGA3563Z by Qorvo is a wide band low power RF amplifier with 19.5 dB gain, operating from 0 to 5000 MHz. It has a max input power of 18 dBm and operates at temperatures ranging from -40 to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
MSA-0686-BLK
Broadcom's MSA-0686-BLK is a RF amplifier with 16.5 dB gain, operating from 0 to 800 MHz. It has a max input power of 13 dBm and VSWR of 1.7, suitable for wideband low-power applications requiring a characteristic impedance of 50 ohms.
GALI-2
GALI-2 by Mini-circuits is a wideband low power RF amplifier with 12 dB gain and 50 ohm impedance. It operates from 0 to 8000 MHz, handling up to 15 dBm CW input power. Ideal for RF & microwave applications requiring surface mount amplification in the temperature range of -45°C to 85°C.
TGA2526
TGA2526 by Qorvo is a GAAS wide band low power RF amplifier with a gain of 17.5 dB. It operates at frequencies ranging from 2000 MHz to 20000 MHz and can handle a max input power of 22 dBm. This component is commonly used in RF and microwave applications.
MMZ09332BT1
NXP Semiconductors
NXP Semiconductors' MMZ09332BT1 is a narrow band medium power RF amplifier with 28.7 dB gain and 29 dBm max input power. Operating from 130 MHz to 1000 MHz, it's ideal for applications requiring high-frequency amplification in RF and microwave systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Rf Micro Devices
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved