Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; JESD-609 Code: e3;
Median Price
$3.838
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
Parana Technologies
$1.146
$1.066
IDEA Electronic Components Group
$1.232
$1.170
Aztec Data Supply Inc.
$1.685
DigiPath Technology Company
$1.922
$1.845
Advanced Electronics
$1.955
$1.779
$1.603
Aranea Global
$3.761
$3.611
Corohmni
Continental Prestige Electronics
Argo Parts USA
Ampacity Inc.
$4.000
AZTECH Wire
$12.152
One Stop Electronics
$26.000
Semicontronic
$39.000
$38.025
$37.830
Component Stockers USA
$99.990
Lixinc
Authorized Procurement Solutions
S.R.D Solutions
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
A-Z Elektronik GmbH
Futuretech Components
Perfect Parts
Corphita
RF & Microwave Amplifiers HMC475ST89E attributes and parameters. Explore more RF & Microwave Amplifiers devices from Hittite Microwave
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
Terminal Finish:
HMC475ST89E RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
6625-01-644-0589, 6625016440589
NIIN
016440589
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Eic Semiconductor
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Bkc Semiconductors
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
New Jersey Semiconductor Products
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
Transys Electronics
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
HMC460LC5
Hittite Microwave
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Frequency: 0 MHz;
HMC478ST89E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Temperature: 85 Cel;
HMC871LC5
Analog Devices
Analog Devices' HMC871LC5 is a wide band low power RF amplifier with 10 dB gain and 50 ohm impedance. It operates from 0 to 20000 MHz, handling up to 10 dBm CW input power. Ideal for applications requiring high frequency amplification in environments ranging from -40°C to 85°C.
ABA-52563-BLKG
Broadcom
Broadcom's ABA-52563-BLKG is a RF amplifier with 20dB gain, 1.4 VSWR, and 3500 MHz max frequency. Ideal for wideband low power applications, it operates at 5V with a max input power of 20 dBm. This component has a characteristic impedance of 50 ohms and is designed for surface mount installation.
HMC659LC5
HMC659LC5 by Analog Devices is a wide band medium power RF amplifier with 14 dB gain and 50 ohm impedance. It operates from 0 to 15000 MHz, handles up to 20 dBm CW input power, and has a temperature range of -40 to 85°C. Ideal for RF & microwave applications requiring high performance in a compact plastic/epoxy package.
NBB-400-T1
Rf Micro Devices
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: CERAMIC; Technology: BIPOLAR; Maximum Operating Frequency: 8000 MHz;
SGA3363ZSR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: TSSOP6,.08;
PGA-102+
Mini-circuits
The Mini-circuits PGA-102+ is a wide band low power RF amplifier with 14.4 dB gain, operating from 50 MHz to 6 GHz. It has a max input power of 28 dBm and operates on a 3.3V supply, making it suitable for various RF and microwave applications requiring amplification in the frequency range of 50-6000 MHz.
760
Anaren
RF/Microwave Amplifiers; No. of Terminals: 8; Package Body Material: METAL; Technology: HYBRID; Screening Level: 38535Q/M;38534H;883B; No. of Functions: 1;
ADL5545ARKZ-R7
ADL5545ARKZ-R7 by Analog Devices is a wide band medium power RF amplifier with 24.8 dB gain and 50 ohm impedance. It operates from 30 MHz to 6 GHz, with a max input power of 18 dBm. This component is ideal for RF and microwave applications requiring high performance in a compact surface mount package.
MAR-3SM+
MAR-3SM+ by Mini-circuits is a wideband low power RF amplifier with 8 dB gain, suitable for frequencies ranging from 0 to 2000 MHz. It has a max input power of 13 dBm and VSWR of 1.7, making it ideal for RF and microwave applications requiring high performance in temperature range -20 to 85°C.
XP1039-QJ-0G0T
Mimix Broadband
WIDE BAND HIGH POWER; Gain: 15.5 dB; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 25 dBm; Terminal Finish: Matte Tin (Sn);
SGA-3363-TR1
Sirenza Microdevices
WIDE BAND LOW POWER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Input Power (CW): 5 dBm; Maximum Operating Frequency: 3600 MHz; Characteristic Impedance: 50 ohm; Gain: 15.5 dB;
RFPA3800SR
WIDE BAND HIGH POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Screening Level: IEC-61249-2-21;
CMPA601C025D
Wolfspeed
WIDE BAND HIGH POWER;
HMC465LP5ETR
WIDE BAND LOW POWER; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
XP1050-QJ-0G0T
WIDE BAND HIGH POWER; JESD-609 Code: e3; Maximum Input Power (CW): 25 dBm; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn); Construction: COMPONENT;
ADL9006ACGZN-R7
RF/Microwave Amplifiers;
RDA1005L
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; No. of Functions: 1;
ABA-54563-BLKG
Agilent Technologies
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Frequency: 0 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC451LP3ETR
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 5000 MHz; Gain: 12.5 dB; Construction: COMPONENT; Characteristic Impedance: 50 ohm;
HMC451LP3ETR by Analog Devices is a GAAS RF amplifier with 12.5 dB gain, operating from 5V supply at frequencies ranging from 5-18 GHz. With a max input power of 10 dBm, it's ideal for wideband low-power applications in RF and microwave systems requiring surface mount components.
HMC441LP3ETR
Analog Devices' HMC441LP3ETR is a GAAS RF amplifier with 10dB gain, operating from 6.5 to 13.5GHz, handling up to 15dBm CW input power. With a compact surface-mount package and low power consumption of 115mA at 5V, it's ideal for wideband applications in RF and microwave systems.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Terminal Finish: Matte Tin (Sn);
HMC441LC3BTR
HMC441LC3BTR by Analog Devices is a wide band medium power RF amplifier with a gain of 10 dB. It operates at frequencies ranging from 6 GHz to 18 GHz and can handle a max input power of 15 dBm. This surface mount component is commonly used in RF and microwave applications requiring high performance amplification.
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC12,.12SQ,20;
HMC441LP3E
Analog Devices' HMC441LP3E is a wide band low power RF amplifier with 10 dB gain and 50 ohm impedance. It operates from 6.5 to 13.5 GHz, handling up to 15 dBm CW input power. This component is ideal for RF and microwave applications requiring surface mount technology in temperatures ranging from -40°C to +85°C.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 13500 MHz;
HMC441LC3B
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 115 mA;
Analog Devices' HMC441LC3B is a wide band medium power RF amplifier with 10 dB gain, operating from 6-18 GHz. It has a max input power of 15 dBm and operates on a 5V supply, drawing 115 mA. Ideal for RF & microwave applications requiring high performance in plastic/epoxy package.
HMC451LP3E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 5000 MHz;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 150 mA;
HMC451LC3TR
Analog Devices' HMC451LC3TR is a wide band low power RF amplifier with 14 dB gain, operating from 5-20 GHz. It features a max input power of 10 dBm and operates in temperatures ranging from -40 to 85°C. Ideal for RF and microwave applications requiring high performance in a compact ceramic package.
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Maximum Operating Frequency: 20000 MHz; Gain: 14 dB; Characteristic Impedance: 50 ohm;
HMC441LP3
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 6500 MHz;
HMC462LP5ETR
Analog Devices' HMC462LP5ETR is a GAAS technology RF amplifier with 32 terminals, operating from -40 to 85°C. It requires a 5V power supply, drawing a max of 84mA. This wideband low-power device is ideal for surface mount applications in RF and microwave systems.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC451LC3
HMC451LC3 by Analog Devices is a wide band low power RF amplifier with 14 dB gain and operates b/w 5-20 GHz. It has a max input power of 10 dBm, requires 5V supply, and features a surface mount package ideal for RF & microwave applications.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 10 dBm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved