Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Peripheral Drivers UPD166025T1J-E2-AY attributes and parameters. Explore more Peripheral Drivers devices from Renesas Electronics
Interface IC Type:
Peak Reflow Temperature (C):
Maximum Time At Peak Reflow Temperature (s):
UPD166025T1J-E2-AY Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
Tak Cheong Electronics Holdings
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSP742TXUMA1
Infineon Technologies
BSP742TXUMA1 by Infineon is a MOS technology peripheral driver with 8 terminals, operating at -40 to 85 °C. It offers built-in protections for transient, over/under voltage & current. With a max supply voltage of 34V, it's ideal for industrial applications requiring a compact small outline package design.
VN5050AJTR-E
STMicroelectronics
VN5050AJTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in protections for various faults. It features a small outline package style, dual terminal position, and CMOS technology. Ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.
ITS4300SSJDXUMA1
Infineon Technologies' ITS4300SSJDXUMA1 is a peripheral driver with a max supply voltage of 34V. It offers built-in protections against transient, over current, over voltage, and thermal issues. This small outline package (4mm x 5mm) is suitable for applications requiring buffer or inverter based interface ICs.
IRS21844SPBF
International Rectifier
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LMD18201T/NOPB
LMD18201T/NOPB by Texas Instruments is a BCDMOS peripheral driver with PWM, offering 6A output current and 55V max supply voltage. Ideal for automotive applications, it features built-in protections against transient, over current, thermal, and under voltage conditions. With a temperature range of -40 to 125 °C, this rectangular package with flange mount style has 11 terminals in zig-zag position.
L293DWP
Unitrode
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 28; Package Shape: RECTANGULAR; No. of Functions: 2; Built-in Protections: THERMAL;
PTPS22919QDCKRQ1
PTPS22919QDCKRQ1 by Texas Instruments is a peripheral driver with 6 terminals, offering built-in protections for transient, over current, and thermal issues. It operates b/w -40 to 125 °C with a supply voltage range of 1.6V to 5.5V, making it ideal for automotive applications requiring a max output current of 1.5A.
ULN2003AFWG
Toshiba
Toshiba's ULN2003AFWG is a 16-terminal peripheral driver with open-collector output, ideal for buffer or inverter-based applications. With a small outline package style and gull wing terminals, it offers standard input characteristics and inverted output polarity. This bipolar technology device features transient protection and sink current flow direction, making it suitable for various electronic designs.
L9333MD
L9333MD by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and thermal issues. It operates at a max supply voltage of 32V and has a peak output current of 0.015A. This rectangular-shaped driver in small outline package style is ideal for buffer or inverter-based interface IC applications.
ULN-2802A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
TPS22810DBVT
TPS22810DBVT by Texas Instruments is a 6-terminal peripheral driver with max supply voltage of 18V and output current of 2A. It operates in industrial temperature range, offers transient protection, and suits buffer or inverter-based applications. The small outline package is ideal for space-constrained designs.
BTT60302ERAXUMA1
BTT60302ERAXUMA1 by Infineon Technologies is a Peripheral Driver with 2 functions, suitable for automotive applications. It offers built-in protections against transient, over current, and over voltage events. With a max supply voltage of 36V and turn-on/off time of 150us, it ensures reliable performance in various automotive systems.
IR25600SPBF
IR25600SPBF by Infineon is a CMOS half bridge peripheral driver with 8 terminals, operating at -40 to 125 °C. It has a supply voltage of 15V and is designed for automotive applications due to its moisture sensitivity level of 2.
VNQ7050AJTR
VNQ7050AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C and has a max supply voltage of 28 V. Ideal for automotive applications due to its small outline package style and sink output current flow direction.
MAX845ESA+
MAX845ESA+ by Analog Devices is a CMOS technology-based peripheral driver with 8 terminals. It operates b/w -40 to 85°C, with supply voltage range of 4.5-5.5V. This small outline package IC is ideal for industrial applications requiring buffer or inverter based drivers.
BSP772TXUMA1
BSP772TXUMA1 by Infineon: Peripheral driver with 8 terminals, MOS tech, 34V max supply voltage. Ideal for industrial applications requiring transient, over/under voltage protection. Small outline package, sink output current flow direction, and 17A nominal output peak current limit.
NCV8461DR2G
NCV8461DR2G by Onsemi is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a max supply voltage of 34V and has a max output current of 2A. This interface IC type is ideal for applications requiring sink output current flow direction in automotive electronics.
DS2482S-800+
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
BTS3046SDLATMA1
BTS3046SDLATMA1 by Infineon is a peripheral driver with max supply voltage of 36V, built-in protections for transient, over current, and over voltage. It has turn-on time of 120us and nominal output peak current limit of 4.3A. Ideal for industrial applications requiring sink output current flow direction in a compact rectangular package.
BTS70082EPAXUMA1
BTS70082EPAXUMA1 by Infineon Technologies is a peripheral driver with 14 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 18V and has a turn-on time of 110us. This small outline package is ideal for automotive applications requiring high output peak current limits up to 7.5A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UPD166019T1F-E1-AY
Renesas Electronics
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; No. of Terminals: 5; Terminal Position: SINGLE; Package Equivalence Code: SMSIP5H,.39,44TB; Terminal Pitch: 1.1 mm; Package Body Material: PLASTIC/EPOXY;
UPD166009T1F-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Shape: RECTANGULAR; Qualification: Not Qualified; Turn-off Time: 600 us;
UPD166024T1K-E2-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
UPD166021T1F-E1-AY
UPD166015GR-E2-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
UPD166026T1K-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
UPD166005GR-E2-AZ
UPD166020T1F-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; No. of Terminals: 5; Power Supplies (V): 12; Nominal Supply Voltage: 12 V; Surface Mount: YES; Terminal Pitch: 1.1 mm;
UPD166011T1J-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; No. of Terminals: 12; Driver No. of Bits: 2; Power Supplies (V): 9/16; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
UPD166024T1K-E1-AY
UPD166023T1J-E1-AY
UPD166015GR-E1-AY
UPD166025T1J-E1-AY
UPD166007T1F-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TO-252; Package Shape: RECTANGULAR; Package Equivalence Code: SMSIP5H,.37,50TB;
UPD166017T1F-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; No. of Terminals: 5; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Driver No. of Bits: 1; Power Supplies (V): 12; Package Body Material: PLASTIC/EPOXY;
UPD166005GR-E1-AZ
UPD166007T1F
Peripheral Drivers; No. of Terminals: 5; Qualification: Not Qualified; Terminal Position: SINGLE; Package Equivalence Code: SMSIP5H,.37,50TB; Power Supplies (V): 12;
UPD166013T1J-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; No. of Terminals: 12; Maximum Output Current: 2.5 A; Screening Level: AEC-Q100; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
UPD166023T1J-E2-AY
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved