Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; No. of Terminals: 12; Driver No. of Bits: 2; Power Supplies (V): 9/16; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
A-Z Elektronik GmbH
1+ parts
100+ parts
1k+ parts
10k+ parts
Kepictronics
Authorized Procurement Solutions
Microchip USA
Peripheral Drivers UPD166011T1J-E1-AY attributes and parameters. Explore more Peripheral Drivers devices from Renesas Electronics
Driver No. of Bits:
Interface IC Type:
No. of Terminals:
Package Body Material:
Package Equivalence Code:
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Screening Level:
Sub-Category:
Surface Mount:
Technology:
Maximum Time At Peak Reflow Temperature (s):
UPD166011T1J-E1-AY Interface ICs trade compliance attributes, and parameters.
ECCN
5A002
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bkc Semiconductors
Vishay Telefunken
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
Changzhou Starsea Electronics
Synsemi
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FSFR2100XS
FSFR2100XS by Onsemi is a half bridge peripheral driver with 9 terminals in a rectangular package. It offers over current, over voltage, thermal, and under voltage protection. Ideal for applications requiring source and sink output current flow control.
BTS6133D
Infineon Technologies
BTS6133D by Infineon Technologies is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a nominal voltage of 12V and has a max output current of 7.5A in sink direction. This rectangular small outline package is suitable for automotive applications meeting AEC-Q100 standards.
BTM7740GXUMA1
Infineon's BTM7740GXUMA1 is a 28-terminal peripheral driver with a peak current limit of 15A. It features Gull Wing terminals, suitable for surface mount applications. This buffer/inverter-based driver supports bidirectional current flow and is ideal for various electronic systems requiring high output currents.
FPF2700MX
FPF2700MX by Onsemi is a peripheral driver with a supply voltage range of 2.8V to 36V, offering built-in protections for overcurrent, thermal, and undervoltage. This small outline package IC has 8 terminals and operates in industrial temperature grades from -40°C to 85°C. Ideal for applications requiring buffer or inverter-based peripheral drivers with a peak output current limit of 0.4A.
LM3525MX-H/NOPB
LM3525MX-H/NOPB by Texas Instruments is a peripheral driver with 8 terminals, operating voltage range of 2.7V to 5.5V, and built-in protections for transient, over current, thermal, and under voltage. It has an output current limit of 1A and is ideal for automotive applications due to its temperature grade.
BTS452RXT
BTS452RXT by Infineon Technologies is a peripheral driver with a max supply voltage of 52V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline package is suitable for applications requiring buffer or inverter based interface ICs with source and sink output current flow direction.
LM3526MX-L/NOPB
LM3526MX-L/NOPB by Texas Instruments is a Peripheral Driver with 8 terminals, operating voltage range of 2.7V to 5.5V, and built-in protections for transient, over current, thermal, and under voltage. It has a small outline package style suitable for automotive applications requiring a max supply current of 0.2mA and nominal output peak current limit of 1.2A.
FAN7390AMX1
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
E-L6201PS
STMicroelectronics E-L6201PS is a full bridge peripheral driver with 20 terminals. It operates at a nominal voltage of 36V and can handle a max supply voltage of 48V. With built-in thermal protection, it is suitable for various applications requiring source and sink output current flow direction.
NX18P3001UKZ
NXP Semiconductors
NX18P3001UKZ by NXP Semiconductors is a Peripheral Driver with 12 terminals, operating at -40 to 85°C. It has a voltage range of 5.4-16V and comes in a rectangular plastic/epoxy package suitable for industrial applications. The package style is grid array with fine pitch, making it ideal for surface mount designs.
BTS436L2GATMA1
BTS436L2GATMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 41V. It offers built-in protections against transient, over current, over voltage, and thermal issues. This MOS technology-based device has a nominal output peak current limit of 9.8A and is commonly used as a buffer or inverter based peripheral driver.
VND5T016ASPTR-E
VND5T016ASPTR-E by STMicroelectronics is a peripheral driver with 16 terminals, operating voltage range of 8-36 V. AEC-Q100 compliant, it offers built-in protections for transient, over/under voltage & thermal issues. Ideal for automotive applications due to its small outline package and sink output current flow direction.
VN800PS-E
VN800PS-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 8V to 36V and has a max output current of 0.7A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
IPS2050HQ-32
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
TPS1H000AQDGNRQ1
TPS1H000AQDGNRQ1 by Texas Instruments is a Peripheral Driver with 8 terminals, operating b/w -40 to 125 °C. It offers built-in protections for transient, over current, thermal, and under voltage scenarios. With a max supply voltage of 40 V, it is ideal for automotive applications requiring high side drivers.
LM3526M-H/NOPB
National Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
IPS160H
STMicroelectronics' IPS160H is a peripheral driver with 12 terminals, supporting power supplies from 8V to 36V. It offers a max output current of 2.5A and features a small outline package style for surface mount applications. Ideal for buffer or inverter-based interface ICs, this rectangular-shaped driver has dual terminal positions and gull wing form factor.
HCPL-316J
Hewlett Packard
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G16;
L6202
STMicroelectronics L6202 is a full bridge peripheral driver with 18 terminals, operating voltage range of 12-48V. It features built-in thermal protection and supports up to 5A output current flow in source and sink direction. Ideal for applications requiring true output polarity control and standard input characteristics.
BTS3408GXUMA2/SN
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UPD166025T1J-E2-AY
Renesas Electronics
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
UPD166019T1F-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; No. of Terminals: 5; Terminal Position: SINGLE; Package Equivalence Code: SMSIP5H,.39,44TB; Terminal Pitch: 1.1 mm; Package Body Material: PLASTIC/EPOXY;
UPD166009T1F-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Shape: RECTANGULAR; Qualification: Not Qualified; Turn-off Time: 600 us;
UPD166024T1K-E2-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
UPD166021T1F-E1-AY
UPD166015GR-E2-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
UPD166026T1K-E1-AY
UPD166005GR-E2-AZ
UPD166020T1F-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; No. of Terminals: 5; Power Supplies (V): 12; Nominal Supply Voltage: 12 V; Surface Mount: YES; Terminal Pitch: 1.1 mm;
UPD166024T1K-E1-AY
UPD166023T1J-E1-AY
UPD166015GR-E1-AY
UPD166025T1J-E1-AY
UPD166007T1F-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TO-252; Package Shape: RECTANGULAR; Package Equivalence Code: SMSIP5H,.37,50TB;
UPD166017T1F-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; No. of Terminals: 5; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Driver No. of Bits: 1; Power Supplies (V): 12; Package Body Material: PLASTIC/EPOXY;
UPD166005GR-E1-AZ
UPD166007T1F
Peripheral Drivers; No. of Terminals: 5; Qualification: Not Qualified; Terminal Position: SINGLE; Package Equivalence Code: SMSIP5H,.37,50TB; Power Supplies (V): 12;
UPD166013T1J-E1-AY
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; No. of Terminals: 12; Maximum Output Current: 2.5 A; Screening Level: AEC-Q100; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
UPD166023T1J-E2-AY
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved