Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Power Field Effect Transistors (FET) UPA2201T1M-T1-AT attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Renesas Electronics
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
UPA2201T1M-T1-AT Transistors trade compliance attributes, and parameters.
ECCN
5A002
ECCN Governance
EAR
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
Dc Components
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
DN3535N8-G
DN3535N8-G by Microchip Technology is a N-CHANNEL FET with 0.5A IDM, 1.6W Abs Pd, and 10ohm RDS(on). Ideal for switching applications in small outline packages, operating from -55 to 150°C.
SCT2280KEC
ROHM
ROHM's SCT2280KEC is a N-CHANNEL FET with 1200V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and can handle up to 35A pulsed drain current. With a max power dissipation of 108W and operating temperature of 175°C, it offers reliable performance in various industrial settings.
FDD4685-F085P
FDD4685-F085P by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage and 32A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, operates in ENHANCEMENT MODE, and has an Avalanche Energy Rating of 121mJ.
SI7252DP-T1-GE3
Vishay Intertechnology's SI7252DP-T1-GE3 is a N-channel Power FET with 100V DS breakdown voltage, ideal for switching applications. Featuring separate elements with built-in diode, it has 80A max pulsed drain current and 0.017 ohm max drain-source resistance. Its small outline package and matte tin finish make it suitable for surface mount designs.
IRLML0030TRPBF-1
Infineon Technologies
Infineon's IRLML0030TRPBF-1 is a N-channel Power FET with 30V DS breakdown voltage and 21A IDM. Ideal for applications requiring high power dissipation up to 1.3W, such as in small outline packages where space is limited. Operating in enhancement mode, it offers low 0.027 ohm drain-source resistance for efficient performance.
IRF7416TRPBF-1
International Rectifier
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; No. of Elements: 1; Moisture Sensitivity Level (MSL): 1;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
IRF9530
Intersil
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 88 W; Avalanche Energy Rating (EAS): 500 mJ; No. of Elements: 1;
IRF7103TRPBF
IRF7103TRPBF by Infineon Technologies is a N-CHANNEL Power FET with 50V DS Breakdown Voltage and 3A Drain Current. It is used for SWITCHING applications in ENHANCEMENT MODE, featuring a 0.13 ohm On Resistance. This small outline transistor has 2 elements with built-in diode, operating up to 150°C.
IRFP4668PBF
IRFP4668PBF by Infineon is a N-CHANNEL Power FET with 200V DS Breakdown Voltage. It has a max IDM of 520A and EAS of 760mJ, suitable for SWITCHING applications. With 0.0097 ohm RDS(on) and 520W Pdiss, it operates in ENHANCEMENT MODE at up to 175°C.
ATP304-TL-H
The Onsemi ATP304-TL-H is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 400A IDM. Ideal for applications requiring high power dissipation, it features a built-in diode, 0.0089 ohm RDS(on), and operates in enhancement mode. Suitable for surface mount designs with GULL WING terminals, this FET offers 656mJ EAS for robust performance in various electronic systems.
IRF7303TRPBF
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Operating Mode: ENHANCEMENT MODE;
FDB3632-F085
FDB3632-F085 by Onsemi is a power field effect transistor (FET) with a min DS breakdown voltage of 100V. It is an N-channel transistor with a max drain current of 12A and a max power dissipation of 310W. This transistor is commonly used for switching applications in various industries.
SQM40P10-40L_GE3
The Vishay Intertechnology SQM40P10-40L_GE3 is a P-channel power FET with 100V DS breakdown voltage and 160A max pulsed drain current. Ideal for applications requiring high power handling, such as motor control systems or power supplies. Features include a built-in diode, 0.04 ohm max RDS(on), and small outline package style.
FDMS86101A
FDMS86101A by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 180A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.008 ohm RDS(on), and 104W Pdiss. Suitable for surface mount with 5 terminals in a RECTANGULAR package style.
IRLML6402TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
JANTX2N6796
Unitrode
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation Ambient: 25 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Pulsed Drain Current (IDM): 32 A;
IRF7343TRPBF
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G8;
FDS6982AS_NL
Fairchild Semiconductor
Fairchild Semiconductor's FDS6982AS_NL is a N-CHANNEL Power FET with 30V DS Breakdown Voltage and 8.6A Max Drain Current. Ideal for SWITCHING applications, it features a PLASTIC/EPOXY package, GULL WING terminals, and operates in ENHANCEMENT MODE up to 150°C.
BSC026N08NS5ATMA1
Infineon Technologies' BSC026N08NS5ATMA1 is a power FET with N-channel configuration and built-in diode. It has a min DS breakdown voltage of 80V, max pulsed drain current of 400A, and low on-resistance of 0.0026 ohm. Ideal for switching applications in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UPA2378T1P-E1-A
Renesas Electronics
N-CHANNEL; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.8 W; Maximum Operating Temperature: 150 Cel; Maximum Drain Current (ID): 8 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
UPA2350T1G-E4-A
N-CHANNEL; Configuration: COMPLEX; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
UPA2210T1M-T1-AT
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Drain Current (ID): 7.2 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
UPA2353T1P-E4-A
N-CHANNEL; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Maximum Operating Temperature: 150 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
UPA2351BT1P-E4-A
N-CHANNEL; Configuration: COMMON DRAIN, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Operating Mode: ENHANCEMENT MODE; Terminal Finish: TIN BISMUTH;
UPA2350BT1G-E4-A
N-CHANNEL; Configuration: COMPLEX; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Qualification: Not Qualified; Transistor Element Material: SILICON;
UPA2379T1P-E1-A
N-CHANNEL; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.8 W; Terminal Finish: TIN BISMUTH; Maximum Operating Temperature: 150 Cel; Maximum Drain Current (Abs) (ID): 8 A;
UPA2200T1M-T2-AT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Drain Current (ID): 8 A; Qualification: Not Qualified;
UPA2350T1P-E4-A
N-CHANNEL; Configuration: COMMON DRAIN, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Transistor Application: SWITCHING; Operating Mode: ENHANCEMENT MODE;
UPA2210T1M-T2-AT
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
UPA2353T1G-E4-A
N-CHANNEL; Configuration: COMMON DRAIN, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Transistor Application: SWITCHING; Package Shape: SQUARE;
UPA2351T1G-E4-A
N-CHANNEL; Configuration: COMPLEX; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; JESD-30 Code: S-XBGA-B4; Transistor Element Material: SILICON;
UPA2211T1M-T2-AT
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; No. of Elements: 1; Package Style (Meter): SMALL OUTLINE;
UPA2373T1P-E4-A
Power Field-Effect Transistors; Terminal Finish: TIN BISMUTH; JESD-609 Code: e6;
UPA2201T1M-T2-AT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Shape: RECTANGULAR; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
UPA2350BT1P-E4-A
N-CHANNEL; Configuration: COMMON DRAIN, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Terminal Form: BALL; Peak Reflow Temperature (C): 260;
UPA2200T1M-T1-AT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Transistor Element Material: SILICON; Peak Reflow Temperature (C): NOT SPECIFIED;
UPA2211T1M-T1-AT
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; No. of Elements: 1; Terminal Position: DUAL;
UPA2351T1P-E4-A
N-CHANNEL; Configuration: COMMON DRAIN, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
UPA2201T1M-T1-AT
Nec Electronics America
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-F8; Qualification: Not Qualified; Operating Mode: ENHANCEMENT MODE;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved