Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAW FILTER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -10 Cel; Height: 1.5 mm; Maximum Insertion Loss: 4.5 dB; Center/Cutoff Frequency (fo/fc): 430 MHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SAW Filters SF0430BA02508S attributes and parameters. Explore more SAW Filters devices from Renesas Electronics
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Terminal Finish:
Width (mm):
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358D-T
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B39242B8873P810
Qualcomm
B39242B8873P810 by Qualcomm is a SAW filter with 5 terminals, operating at temperatures from -20 to 85°C. It has a width of 0.9mm and max insertion loss of 2dB at a center frequency of 2442MHz. Ideal for applications requiring surface mount filters with impedance of 50 OHM and compact dimensions.
B39431B3748H110
TDK
The TDK B39431B3748H110 SAW Filter has a center frequency of 434.42 MHz and max insertion loss of 2.6 dB. With gold terminal finish, it operates b/w -45°C to 95°C, ideal for surface mount applications in various electronic devices requiring impedance of 350 OHM//2.2 pF.
B39921B3588U410W9
The TDK B39921B3588U410W9 SAW Filter has 6 terminals, operates b/w 0-70°C, with a width of 3.0mm. It offers a max insertion loss of 3.3 dB at 915 MHz for applications requiring a surface mount filter with an impedance of 50 OHM.
SF0150BA03095S
Renesas Electronics
SAW FILTER; No. of Terminals: 10; Impedance (Input): 50 OHM; Length: 13.3 mm; Center/Cutoff Frequency (fo/fc): 150.025 MHz; Dimensions: L13.3XB6.5XH2.0 (mm)/L0.524XB0.256XH0.079 (inch);
SF0948BA02589S
SAW FILTER; JESD-609 Code: e3; Attenuation At Maximum Frequency: 35 dB; Dimensions: L3.0XB3.0XH1.5 (mm)/L0.118XB0.118XH0.059 (inch); No. of Functions: 1; Height: 1.5 mm;
SF1220BA02521S
SAW FILTER; Terminal Finish: Tin/Lead (Sn/Pb); Height: 1.3 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -85 Cel; Impedance (Input): 200 OHM;
SF0140BA02450S
SAW FILTER; Maximum Insertion Loss: 11 dB; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: 0 Cel; Mounting Type: SURFACE MOUNT; No. of Terminals: 12;
HWCA602
SAW FILTER; Width (mm): 3.5; Impedance (Input): 50 OHM//50 nH; Height: 1 mm; Output Impedance (ohm): 50 OHM//50 nH; Length: 3.5 mm;
TA0741B
Tai-saw Technology
TA0741B by Tai-saw Tech: SAW Filter with 6 terminals, fo/fc at 2067.5 MHz, and max insertion loss of 4 dB. Ideal for applications requiring a compact surface-mount filter with an operating temp range of -40 to 85°C.
F047MSL
Toshiba
SAW-VIDEO/SOUND FILTER; Minimum Operating Temperature: -20 Cel; Dimensions: L16.3XB6.3XH4.0 (mm)/L0.642XB0.248XH0.157 (inch); Impedance (Input): 16.4 pF OHM; No. of Functions: 1; Length: 16.3 mm;
SF0140CD03085T
SAW FILTER; Width (mm): 12.65; No. of Terminals: 18; Impedance (Input): 50 OHM; Height: 5.33 mm; Mounting Type: THROUGH HOLE MOUNT;
SF0088BA02429S
SAW FILTER; Impedance (Input): 50 OHM; JESD-609 Code: e3; Mounting Type: SURFACE MOUNT; Dimensions: L15.9XB6.5XH2.0 (mm)/L0.626XB0.256XH0.079 (inch); No. of Terminals: 10;
SF1843BA02598S
SAW FILTER; No. of Functions: 1; Package Material: PLASTIC; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Height: 1.4 mm;
TB1347A
TB1347A by Tai-saw Technology is a SAW FILTER with 2 functions, 10 terminals, and 70 MHz center frequency. It operates b/w -40 to 80 °C and has a max insertion loss of 8.5 dB. Ideal for applications requiring surface mount filters with impedance of 50 OHM.
TA2596A
TA2596A by Tai-saw Technology is a SAW filter with 5 terminals, 725.5 MHz center frequency, and 3 dB max insertion loss. Operating b/w -30 to 85 °C, it has a compact size of 1.4mm length, ideal for surface mount applications in RF circuits.
SF0480BA02643S
SAW FILTER; Center/Cutoff Frequency (fo/fc): 480 MHz; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
SF0434BA02587S
SAW FILTER; Minimum Operating Temperature: -10 Cel; Package Material: CERAMIC; Impedance (Input): 50 OHM; No. of Terminals: 6; Mounting Type: SURFACE MOUNT;
SF0063BA03106S
SAW FILTER; No. of Terminals: 10; Impedance (Input): 50 OHM; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; Output Impedance (ohm): 50 OHM;
B39242B3912U410
The TDK B39242B3912U410 SAW Filter has 6 terminals, operates b/w -40°C to 85°C, with a center frequency of 2448.5 MHz. It offers low insertion loss of 3 dB and is ideal for applications requiring a compact surface mount filter in automotive electronics.
B635
Infineon Technologies
SAW FILTER; Center/Cutoff Frequency (fo/fc): 480 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF0426BA02436S
SAW FILTER; Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM; No. of Terminals: 12; No. of Functions: 1; Height: 1.98 mm;
SF0433BA02629S
SAW FILTER; Center/Cutoff Frequency (fo/fc): 433 MHz; Maximum Operating Temperature: 75 Cel; No. of Functions: 1; Width (mm): 3.8; Minimum Operating Temperature: -20 Cel;
SF0434BA02507S
SAW FILTER; Width (mm): 3.8; Maximum Insertion Loss: 3.5 dB; Dimensions: L3.8XB3.8XH1.5 (mm)/L0.15XB0.15XH0.059 (inch); Minimum Operating Temperature: -40 Cel; Power Supply (V): 10;
SF0434BA02617S
SAW FILTER; Maximum Operating Temperature: 75 Cel; Maximum Insertion Loss: 2.7 dB; JESD-609 Code: e3; Center/Cutoff Frequency (fo/fc): 434 MHz; Length: 3 mm;
SF0456BA02444S
SAW FILTER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length: 7 mm; Maximum Insertion Loss: 13 dB;
SF0456BA02445S
SAW FILTER; Maximum Operating Temperature: 85 Cel; Dimensions: L7.0XB5.0XH2.0 (mm)/L0.276XB0.197XH0.079 (inch); No. of Functions: 1; Center/Cutoff Frequency (fo/fc): 456 MHz; Length: 7 mm;
SF0465BA02509S
SAW FILTER; JESD-609 Code: e3; Center/Cutoff Frequency (fo/fc): 465 MHz; No. of Functions: 1; Minimum Operating Temperature: -40 Cel; Maximum Insertion Loss: 4.5 dB;
SF0430BA02508S
Integrated Device Technology
SAW FILTER; Minimum Operating Temperature: -10 Cel; Impedance (Input): 50 OHM; Center/Cutoff Frequency (fo/fc): 430 MHz; Dimensions: L3.8XB3.8XH1.5 (mm)/L0.15XB0.15XH0.059 (inch); Width (mm): 3.8;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved