Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAW FILTER; Maximum Operating Temperature: 85 Cel; Package Material: CERAMIC; Output Impedance (ohm): 50 OHM; Dimensions: L7.0XB5.0XH1.82 (mm)/L0.276XB0.197XH0.072 (inch); Width (mm): 5.0;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SAW Filters SF0325BA02633S attributes and parameters. Explore more SAW Filters devices from Renesas Electronics
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Dimensions:
Sub-Category:
Terminal Finish:
Width (mm):
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Panjit International
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MBR0520LT1
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
USB3320C-EZK-TR
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
SF0280BA01984S
Renesas Electronics
SAW FILTER; Length: 5 mm; Mounting Type: SURFACE MOUNT; No. of Terminals: 8; Maximum Operating Temperature: 30 Cel; Output Impedance (ohm): 50 OHM;
SF0140BA03010T
SAW FILTER; Impedance (Input): 50 OHM; Terminal Finish: Matte Tin (Sn); Height: 5.33 mm; Output Impedance (ohm): 50 OHM; Width (mm): 12.7;
SF0948BA03155S
SAW FILTER; Width (mm): 3.8; Height: 1.5 mm; JESD-609 Code: e3; Dimensions: L3.8XB3.8XH1.5 (mm)/L0.15XB0.15XH0.059 (inch); Length: 3.8 mm;
SF14-1575F5UUA1
Kyocera
Kyocera SF14-1575F5UUA1 SAW Filter operates b/w -30°C to 85°C, with 1.2 dB max insertion loss at 1575 MHz. Designed for surface mount, it has 5 terminals and impedance of 50Ω, suitable for applications requiring precise frequency filtering.
854909
Sawtek
SAW FILTER; No. of Terminals: 12; Center/Cutoff Frequency (fo/fc): 140 MHz; Impedance (Input): 50 OHM; Height: 2 mm; Dimensions: L13.3XB6.5XH2.0 (mm)/L0.524XB0.256XH0.079 (inch);
B39162B4310P810
The TDK B39162B4310P810 SAW Filter has a center frequency of 1588.655 MHz and max insertion loss of 1.9 dB. With AEC-Q200 screening, it's ideal for automotive applications requiring a compact design with surface mounting type and gold terminal finish.
SF0456BA02445S
SAW FILTER; Maximum Operating Temperature: 85 Cel; Dimensions: L7.0XB5.0XH2.0 (mm)/L0.276XB0.197XH0.079 (inch); No. of Functions: 1; Center/Cutoff Frequency (fo/fc): 456 MHz; Length: 7 mm;
TA0152B
Tai-saw Technology
TA0152B by Tai-saw Tech: SAW Filter with 942.5 MHz fo/fc, 4 dB Max Insertion Loss, and 50 OHM Impedance. Ideal for RF applications due to its Surface Mount design, operating from -30°C to 85°C in various electronic systems.
TFS807
TFS807 by Microchip Technology is a SAW filter with 3dB max insertion loss, operating at 807MHz. It has a compact size of L3.81xB3.81xH1.2mm and is ideal for applications requiring a surface mount filter with 50 ohm impedance, such as RF communication systems.
F072FSL
Toshiba
SAW-VIDEO/SOUND FILTER; Length: 16.3 mm; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -20 Cel; Mounting Type: THROUGH HOLE MOUNT; Output Impedance (ohm): 4.5 pF OHM;
TFS170E
Vectron International
SAW FILTER; Maximum Insertion Loss: 13 dB; Additional Features: TR, EMBOSSED, 13 INCH; Dimensions: L15.32XB6.5XH1.8 (mm)/L0.603XB0.256XH0.071 (inch); Center/Cutoff Frequency (fo/fc): 170 MHz; Output Impedance (ohm): 570 OHM//-13.6 pF;
SF0043BA02523T
SAW FILTER; Dimensions: L13.7XB2.15XH4.8 (mm)/L0.539XB0.085XH0.189 (inch); Impedance (Input): 1100 OHM//16.4 pF; No. of Functions: 1; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -20 Cel;
SF0096BA02458S
SAW FILTER; JESD-609 Code: e3; Output Impedance (ohm): 50 OHM; Length: 7 mm; Height: 1.9 mm; Terminal Finish: Matte Tin (Sn);
B39232B3416U410
Rf360 Europe
SAW FILTER; No. of Terminals: 6; Length: 3 mm; No. of Functions: 1; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Minimum Operating Temperature: -40 Cel;
B39311B3713U410
SAW FILTER; Width (mm): 3.0; No. of Terminals: 6; Height: 1.1 mm; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Output Impedance (ohm): 50 OHM;
SF0140BA02457S
SAW FILTER; Maximum Insertion Loss: 13 dB; Center/Cutoff Frequency (fo/fc): 140 MHz; Width (mm): 6.5; Impedance (Input): 50 OHM; No. of Functions: 1;
SF0070CF51851T
SAW FILTER; Width (mm): 12.7; Package Material: PLASTIC; No. of Terminals: 6; Maximum Insertion Loss: 25.5 dB; Center/Cutoff Frequency (fo/fc): 70 MHz;
SF0036BA11033T
SAW-VIDEO/SOUND FILTER; Width (mm): 20.6; Center/Cutoff Frequency (fo/fc): 36 MHz; Mounting Type: THROUGH HOLE MOUNT; No. of Functions: 1; Height: 5.1 mm;
B39871B3744H110
The TDK B39871B3744H110 SAW Filter has 6 terminals, operates b/w -45°C to 105°C, with a width of 3.0mm. It offers a max insertion loss of 3.7 dB at 868.3 MHz and impedance of 290 OHM//1.3 pF. Ideal for surface mount applications in various electronic devices requiring precise frequency filtering.
B39871B4316P810
The TDK B39871B4316P810 is a SAW filter with 5 terminals, operating from -40 to 85°C. It offers a max insertion loss of 2.9 dB at 869 MHz and has an impedance of 50 ohms. Ideal for automotive applications due to AEC-Q200 screening level compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF0300BA02466S
SAW FILTER; Terminal Finish: Tin/Lead (Sn/Pb); Center/Cutoff Frequency (fo/fc): 300 MHz; Maximum Insertion Loss: 12 dB; Impedance (Input): 50 OHM; JESD-609 Code: e0;
SF0300BA02467S
SAW FILTER; Width (mm): 5.0; No. of Functions: 1; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
SF0325BA02642S
SAW FILTER; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Terminal Finish: Matte Tin (Sn);
SF0326BA03198S
SAW FILTER; Output Impedance (ohm): 50 OHM; Terminal Finish: Matte Tin (Sn); Impedance (Input): 50 OHM; JESD-609 Code: e3; No. of Terminals: 10;
SF0350BA03152S
SAW FILTER; Mounting Type: SURFACE MOUNT; Length: 7 mm; No. of Functions: 1; Height: 2 mm; Maximum Operating Temperature: 60 Cel;
SF0374BA02518S
SAW FILTER; Minimum Operating Temperature: -40 Cel; Package Material: PLASTIC; Center/Cutoff Frequency (fo/fc): 374 MHz; Maximum Insertion Loss: 10 dB; No. of Terminals: 8;
SF0380BA02442S
SAW FILTER; No. of Functions: 1; Length: 7 mm; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn);
SF0380BA02443S
SAW FILTER; Mounting Type: SURFACE MOUNT; Height: 2 mm; Dimensions: L7.0XB5.0XH2.0 (mm)/L0.276XB0.197XH0.079 (inch); Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM;
SF0325BA02633S
Spectrum Control
SAW FILTER; Impedance (Input): 50 OHM; Length: 7 mm; Dimensions: L7.0XB5.0XH1.82 (mm)/L0.276XB0.197XH0.072 (inch); Width (mm): 5.0; Terminal Finish: GOLD OVER NICKEL;
Integrated Device Technology
SAW FILTER; Height: 1.82 mm; Package Material: CERAMIC; Minimum Operating Temperature: -40 Cel; No. of Terminals: 10; Mounting Type: SURFACE MOUNT;
SF0325BA02646S
SAW FILTER; JESD-609 Code: e3; Length: 7 mm; Terminal Finish: Matte Tin (Sn); Maximum Insertion Loss: 20 dB; Package Material: CERAMIC;
Api Technologies
SAW FILTER; Width (mm): 5.0; No. of Terminals: 10; JESD-609 Code: e4; Minimum Operating Temperature: -40 Cel; Impedance (Input): 50 OHM;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved