Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAW FILTER; Center/Cutoff Frequency (fo/fc): 249.6 MHz; Length: 9.1 mm; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn); Impedance (Input): 50 OHM;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SAW Filters SF0250BA03189S attributes and parameters. Explore more SAW Filters devices from Renesas Electronics
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Dimensions:
Sub-Category:
Terminal Finish:
Width (mm):
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
Central Semiconductor
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
1554216004
Molex
WIRE AND CABLE;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Diotec Semiconductor Ag
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
B39871B3440U410
Rf360 Europe
SAW FILTER; No. of Functions: 1; Width (mm): 3.0; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Maximum Operating Temperature: 105 Cel; Maximum Insertion Loss: 3.2 dB;
HWCA103
SAW FILTER; Output Impedance (ohm): 50 OHM//5 nH; Center/Cutoff Frequency (fo/fc): 888.5 MHz; Impedance (Input): 50 OHM//5 nH; Length: 3.5 mm; Maximum Operating Temperature: 70 Cel;
NWD918
Infineon Technologies
SAW FILTER; Maximum Operating Temperature: 80 Cel; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -10 Cel; No. of Terminals: 8; Package Material: PLASTIC;
SF0070BA03050S
SAW FILTER; Package Material: PLASTIC; Height: 1.8 mm; JESD-609 Code: e3; Impedance (Input): 50 OHM; Mounting Type: SURFACE MOUNT;
SF1220BA02539S
SAW FILTER; Width (mm): 3.0; Impedance (Input): 200 OHM; Additional Features: TAPE AND REEL; Mounting Type: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn);
SF0250BA02425S
SAW FILTER; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e0; Minimum Operating Temperature: -20 Cel; No. of Functions: 1; Height: 2.12 mm;
SF1575BA02532S
SAW FILTER; No. of Terminals: 4; Height: .75 mm; Center/Cutoff Frequency (fo/fc): 1575.42 MHz; Terminal Finish: Matte Tin (Sn); Package Material: PLASTIC;
B39162B3413U410
SAW FILTER; Width (mm): 3.0; Height: 1.1 mm; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Additional Features: AEC-Q200; Maximum Operating Temperature: 85 Cel;
SF2124E
Murata Manufacturing
Murata Manufacturing's SF2124E is a SAW filter with 6 terminals, AEC-Q200 screening. It operates b/w -40 to 85°C, has 5 dB max insertion loss at 2441.8 MHz. Ideal for applications requiring a compact surface mount design and impedance of 50Ω.
B39192B5609U410
B39192B5609U410 by Rf360 Europe is a SAW FILTER with 6 terminals, operating at -40 to 105 °C. It has a width of 3mm, max insertion loss of 4 dB, and center frequency of 1882.5 MHz. Ideal for applications requiring surface mount filters with impedance of 50 OHM.
F072BSL
Toshiba
SAW-VIDEO/SOUND FILTER; No. of Functions: 1; Manufacturer Series: F072BSL; Impedance (Input): 12.4 pF OHM; Height: 4 mm; Output Impedance (ohm): 4.7 pF OHM;
B39721B5326U410
TDK
The TDK B39721B5326U410 SAW Filter has 2 functions, 6 terminals, and operates b/w -40°C to 85°C. With a width of 3mm and height of 1.1mm, it offers a max insertion loss of 4.2 dB at a center frequency of 725.5 MHz. Ideal for applications requiring surface mount filters with an impedance of 50Ω.
SF0088BA02429S
SAW FILTER; Impedance (Input): 50 OHM; JESD-609 Code: e3; Mounting Type: SURFACE MOUNT; Dimensions: L15.9XB6.5XH2.0 (mm)/L0.626XB0.256XH0.079 (inch); No. of Terminals: 10;
SF1141B-4
SF1141B-4 by Murata Manufacturing is a SAW filter with 12 terminals, gold finish. It operates b/w -40 to 85 °C and has a width of 5.2mm. With a center frequency of 75 MHz and impedance of 250 OHM, it's ideal for surface mount applications requiring low insertion loss.
SF0704BA03163S
SAW FILTER; Minimum Operating Temperature: -20 Cel; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 4.2 dB; Impedance (Input): 50 OHM; Center/Cutoff Frequency (fo/fc): 704 MHz;
SBU4855LD
SAW FILTER; Height: 3.8 mm; Impedance (Input): 50 OHM; Center/Cutoff Frequency (fo/fc): 480 MHz; Manufacturer Series: SBU4855LD; Mounting Type: THROUGH HOLE MOUNT;
B39242B8857L210
B39242B8857L210 by Rf360 Europe is a SAW FILTER with 2.4 dB Max Insertion Loss, 2442 MHz Center Frequency, and Gold (Au) finish. Ideal for applications requiring 50 OHM impedance, it operates b/w -30 to 85 °C in surface mount configurations.
SF0140BA02393S
SAW FILTER; No. of Functions: 1; Height: 1.75 mm; JESD-609 Code: e0; Width (mm): 7.1; Length: 9.1 mm;
SF0070CD03096T
SAW FILTER; Center/Cutoff Frequency (fo/fc): 70 MHz; JESD-609 Code: e3; Output Impedance (ohm): 50 OHM; Mounting Type: THROUGH HOLE MOUNT; Impedance (Input): 50 OHM;
AFS20A26-915.00-T3
Abracon's AFS20A26-915.00-T3 SAW Filter operates b/w -30°C to 85°C, with a center frequency of 915 MHz and 3 dB max insertion loss. With 4 terminals and dimensions of L2.0xB1.6xH0.9 (mm), it is ideal for applications requiring a compact surface mount filter with 50 ohm impedance such as RF communication systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF0239CD03100S
SAW FILTER; No. of Terminals: 12; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 13.5 dB; Terminal Finish: Matte Tin (Sn); Dimensions: L7.0XB5.0XH2.0 (mm)/L0.276XB0.197XH0.079 (inch);
SF0240CD21956S
SAW FILTER; Height: 1.96 mm; No. of Functions: 1; Package Material: PLASTIC; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: 16 dB;
SF0244CN03098S
SAW FILTER; Mounting Type: SURFACE MOUNT; Width (mm): 3.785; Maximum Operating Temperature: 50 Cel; Height: 1.56 mm; Length: 11.405 mm;
SF0250BA03223S
SAW FILTER; Center/Cutoff Frequency (fo/fc): 249.6 MHz; Width (mm): 4.8; Length: 9.1 mm; Height: 1.8 mm; Dimensions: L9.1XB4.8XH1.8 (mm)/L0.358XB0.189XH0.071 (inch);
SF0280BA01984S
SAW FILTER; Length: 5 mm; Mounting Type: SURFACE MOUNT; No. of Terminals: 8; Maximum Operating Temperature: 30 Cel; Output Impedance (ohm): 50 OHM;
SF0250BA03189S
Spectrum Control
SAW FILTER; Maximum Insertion Loss: 12 dB; JESD-609 Code: e4; Output Impedance (ohm): 50 OHM; Dimensions: L9.1XB4.8XH1.8 (mm)/L0.358XB0.189XH0.071 (inch); Length: 9.1 mm;
SAW FILTER; Maximum Insertion Loss: 13.5 dB; Impedance (Input): 50 OHM; Length: 9.1 mm; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -20 Cel;
Integrated Device Technology
SAW FILTER; Width (mm): 4.8; No. of Functions: 1; Impedance (Input): 50 OHM; Dimensions: L9.1XB4.8XH1.8 (mm)/L0.358XB0.189XH0.071 (inch); Center/Cutoff Frequency (fo/fc): 249.6 MHz;
SAW FILTER; Height: 1.8 mm; Length: 9.1 mm; Output Impedance (ohm): 50 OHM; Terminal Finish: Matte Tin (Sn); Package Material: CERAMIC;
Api Technologies
SAW FILTER; Impedance (Input): 50 OHM; JESD-609 Code: e4; No. of Functions: 1; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; No. of Terminals: 10;
SAW FILTER; Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM; No. of Functions: 1; Width (mm): 4.8; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved