Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAW FILTER; Mounting Type: SURFACE MOUNT; No. of Terminals: 8; Height: 1.5 mm; Output Impedance (ohm): 240 OHM//2.4 pF; Width (mm): 3.8;
Median Price
$2.160
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.438
1k+ parts
$1.174
10k+ parts
-
Mouser Electronics
$1.440
$1.180
$1.000
TTI
$0.940
Flip Electronics
$0.820
Sensible Micro Corp
$0.817
$0.759
ACDS - Activité Composants Distribution Service
North Shore Components
Bristol Electronics
VNN
Odintec Ltd.
Nova Conductors
Cogito LLC
Ampacity Inc.
$0.800
Corohmni
$1.111
Advanced Electronics
$1.786
Authorized Procurement Solutions
Assy Fe
Cyclops Electronics Ltd (Excess)
Argo Parts USA
Continental Prestige Electronics
Glotronic Ltd.
Perfect Parts
Aranea Global
SAW Filters B39431B3760Z810 attributes and parameters. Explore more SAW Filters devices from Rf360 Europe
Additional Features:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Terminal Finish:
Width (mm):
RF360 Holdings is a Qualcomm Incorporate subsidiary with R&D and manufacturing and/or sales locations in Europe and Asia and its headquarters in Munich, Germany (collectively, “RF360”) driving innovation in Radio Frequency Front End (RFFE). With over 4,000 employees worldwide, RF360 develops and manufactures innovative RFFE filtering solutions for mobile devices and fast growing business segments, such as IoT, drones, robotics, automotive applications and more. RF360 offers a comprehensive portfolio of filters and filter technologies, including surface acoustic wave (SAW), temperature-compensated surface acoustic wave (TC-SAW) and bulk acoustic wave (BAW) solutions to support the wide range of frequency bands being deployed in networks across the globe.
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Taiwan Semiconductor
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
EU2B-YS303C
Idec
ROTARY SWITCH;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LL4148
Lite-on Semiconductor
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
SF0120BA03167S
Renesas Electronics
SAW FILTER; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Length: 7 mm; Dimensions: L7.0XB5.0XH2.0 (mm)/L0.276XB0.197XH0.079 (inch); Output Impedance (ohm): 50 OHM;
B39921B4344P810
The TDK B39921B4344P810 is a SAW filter with 915 MHz center frequency, 4 dB max insertion loss, and 50 OHM impedance. Ideal for surface mount applications in temperature range -40 to 85 °C, it's commonly used in RF communication systems.
B615
Infineon Technologies
SAW FILTER; Center/Cutoff Frequency (fo/fc): 479.5 MHz;
B39242B8328P810
The TDK B39242B8328P810 SAW Filter has 5 terminals, operates b/w -20°C to 85°C, with a width of 1.1mm. It offers a max insertion loss of 2.9 dB at 2442 MHz and is ideal for applications requiring a surface mount filter with gold terminal finish.
AFS14A26-915.00-T3
Abracon's AFS14A26-915.00-T3 is a SAW filter with 5 terminals, operating from -30°C to 85°C. It offers a center frequency of 915 MHz and max insertion loss of 3.1 dB. Ideal for applications requiring a compact surface mount filter with impedance of 50 ohms.
AFS20A42-1575.42-T3
Abracon's AFS20A42-1575.42-T3 is a SAW filter with 4 terminals, operating from -40 to 85°C. It offers low insertion loss of 1.6 dB at 1575.42 MHz and has an impedance of 50 ohms for input/output. Ideal for surface mount applications in various electronic devices.
RF3336E
Murata Manufacturing
The Murata Manufacturing RF3336E is a SAW filter with 1 function and 6 terminals. It operates at temperatures ranging from -40 to 90 °C, has a max insertion loss of 4 dB, and a center frequency of 868.35 MHz. This surface mount filter is commonly used in applications requiring impedance of 55 OHM//23.9 pF and dimensions of L3.13XB3.13XH1.38 mm.
SF0140BA02457S
SAW FILTER; Maximum Insertion Loss: 13 dB; Center/Cutoff Frequency (fo/fc): 140 MHz; Width (mm): 6.5; Impedance (Input): 50 OHM; No. of Functions: 1;
SF0060CN02289T
SAW FILTER; Impedance (Input): 50 OHM; Maximum Insertion Loss: 34 dB; Center/Cutoff Frequency (fo/fc): 60 MHz; Terminal Finish: Matte Tin (Sn); No. of Functions: 1;
SF0088BA02430S
SAW FILTER; Mounting Type: SURFACE MOUNT; No. of Terminals: 10; Height: 2 mm; Terminal Finish: Matte Tin (Sn); Width (mm): 6.5;
B39162B4310P810
Rf360 Europe
SAW FILTER; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Center/Cutoff Frequency (fo/fc): 1588.655 MHz; Dimensions: L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch); Output Impedance (ohm): 50 OHM;
B39242B8857L210
B39242B8857L210 by Rf360 Europe is a SAW FILTER with 2.4 dB Max Insertion Loss, 2442 MHz Center Frequency, and Gold (Au) finish. Ideal for applications requiring 50 OHM impedance, it operates b/w -30 to 85 °C in surface mount configurations.
SF1575DL03104S
SAW FILTER; JESD-609 Code: e3; Minimum Operating Temperature: 20 Cel; Impedance (Input): 50 OHM; Package Material: PLASTIC; No. of Terminals: 8;
SF0250BA02425S
SAW FILTER; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e0; Minimum Operating Temperature: -20 Cel; No. of Functions: 1; Height: 2.12 mm;
TFS807
Microsemi
SAW FILTER; Additional Features: TR, EMBOSSED, 7 INCH; No. of Functions: 1; Maximum Insertion Loss: 3 dB; Maximum Operating Temperature: 85 Cel; Width (mm): 3.81;
B39731B5328U410
SAW FILTER; Impedance (Input): 50 OHM; Width (mm): 3.0; No. of Functions: 1; Maximum Insertion Loss: 3.5 dB; No. of Terminals: 6;
B39162B4327P810
The TDK B39162B4327P810 is a SAW filter with 5 terminals, operating from -40°C to 85°C. It has a width of 1.1mm and length of 1.4mm, with max insertion loss of 2 dB at 1582.4 MHz. Ideal for applications requiring a compact surface mount filter with impedance of 50 ohms.
854909
Qorvo
Qorvo's 854909 SAW Filter features 12 terminals, gold finish with nickel barrier, and 6.5mm width. With a center frequency of 140 MHz and max insertion loss of 12.5 dB, it is ideal for applications requiring a 50 OHM impedance such as wireless communication systems.
B39162B9415K610
SAW FILTER; Maximum Insertion Loss: 1 dB; Height: .4 mm; Minimum Operating Temperature: -40 Cel; No. of Terminals: 5; Impedance (Input): 50 OHM;
SF0426BA02436S
SAW FILTER; Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM; No. of Terminals: 12; No. of Functions: 1; Height: 1.98 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B39461B5058Z810
SAW FILTER; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 3.2 dB;
SAW FILTER; Minimum Operating Temperature: -30 Cel; Width (mm): 3.8; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 460 MHz; No. of Terminals: 8;
B39431B3710U410
SAW FILTER; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM; Length: 3 mm; Center/Cutoff Frequency (fo/fc): 433.92 MHz;
TDK's B39431B3710U410 SAW Filter features 6 terminals, 3.1 dB max insertion loss, and 433.92 MHz center frequency. Ideal for applications requiring a compact surface mount filter with a cutoff frequency of 105°C to -40°C temperature range and impedance of 50 OHM.
B39431B3790Z810
SAW FILTER; Terminal Finish: Nickel/Gold (Ni/Au); Package Material: CERAMIC; Length: 3.8 mm; Width (mm): 3.8; Center/Cutoff Frequency (fo/fc): 433.92 MHz;
SAW FILTER; Length: 3.8 mm; Height: 1.5 mm; Additional Features: INSERTION LOSS INCLUDING MATCHING NETWORK; Minimum Operating Temperature: -30 Cel; JESD-609 Code: e4;
B39401B3742H110
SAW FILTER; Output Impedance (ohm): 380 OHM//2.2 pF; Width (mm): 3.0; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Minimum Operating Temperature: -40 Cel; No. of Terminals: 6;
SAW FILTER; Center/Cutoff Frequency (fo/fc): 400 MHz; Maximum Operating Temperature: 105 Cel; No. of Terminals: 6; Mounting Type: SURFACE MOUNT; Length: 3 mm;
B39431B3730H110
SAW FILTER; Maximum Operating Temperature: 105 Cel; Length: 3 mm; Dimensions: L3.0XB3.0XH1.0 (mm)/L0.118XB0.118XH0.039 (inch); No. of Functions: 1; Center/Cutoff Frequency (fo/fc): 433.92 MHz;
B39431B3748H110
SAW FILTER; Package Material: CERAMIC; Maximum Insertion Loss: 2.6 dB; Dimensions: L3.0XB3.0XH1.0 (mm)/L0.118XB0.118XH0.039 (inch); Additional Features: INSERTION LOSS INCLUDING LOSS IN MATCHING ELEMENTS; Length: 3 mm;
SAW FILTER; No. of Terminals: 6; Center/Cutoff Frequency (fo/fc): 434.42 MHz; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 2.6 dB; Minimum Operating Temperature: -45 Cel;
B39431B3760Z810
SAW FILTER; Minimum Operating Temperature: -40 Cel; Impedance (Input): 240 OHM//2.4 pF; JESD-609 Code: e4; Package Material: CERAMIC; Output Impedance (ohm): 240 OHM//2.4 pF;
B39431B3782Z810
SAW FILTER; No. of Functions: 1; Output Impedance (ohm): 400 OHM//2.6 pF; Attenuation At Maximum Frequency: 12 dB; Dimensions: L3.8XB3.8XH1.5 (mm)/L0.15XB0.15XH0.059 (inch); Maximum Insertion Loss: 2.9 dB;
B39431B3780Z810
SAW FILTER; Width (mm): 3.8; Maximum Insertion Loss: 2.8 dB; Height: 1.5 mm; Maximum Operating Temperature: 105 Cel; No. of Functions: 1;
B39431B3771Z810
SAW FILTER; Additional Features: INSERTION LOSS INCLUDING LOSS IN MATCHING ELEMENTS; Length: 3.8 mm; Maximum Insertion Loss: 3 dB; Dimensions: L3.8XB3.8XH1.5 (mm)/L0.15XB0.15XH0.059 (inch); JESD-609 Code: e4;
B39431B3774Z810
SAW FILTER; Output Impedance (ohm): 240 OHM//3 pF; No. of Terminals: 8; Screening Level: AEC-Q200; Maximum Operating Temperature: 95 Cel; Center/Cutoff Frequency (fo/fc): 433.92 MHz;
SAW FILTER; JESD-609 Code: e4; Mounting Type: SURFACE MOUNT; Maximum Attenuation Frequency (± Δf): 1080 kHz; Additional Features: INSERTION LOSS INCLUDING LOSS IN MATCHING ELEMENTS; Impedance (Input): 400 OHM//2.6 pF;
SAW FILTER; Width (mm): 3.8; Height: 1.5 mm; Additional Features: INSERTION LOSS INCLUDING LOSS IN MATCHING ELEMENTS; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 240 OHM//3 pF;
SAW FILTER; Height: 1.5 mm; Impedance (Input): 330 OHM//1.9 pF; Additional Features: INSERTION LOSS INCLUDING MATCHING ELEMENTS; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved