Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAW FILTER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn); Output Impedance (ohm): 50 OHM; Center/Cutoff Frequency (fo/fc): 140 MHz; Height: 5.33 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SAW Filters SF0140BA03008T attributes and parameters. Explore more SAW Filters devices from Renesas Electronics
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Output Impedance (ohm):
Dimensions:
Terminal Finish:
Width (mm):
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM2675M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Dc Components
SF0836BA02513S
Renesas Electronics
SAW FILTER; Impedance (Input): 50 OHM; Maximum Insertion Loss: 2.5 dB; Width (mm): 3.0; Dimensions: L3.0XB3.0XH1.5 (mm)/L0.118XB0.118XH0.059 (inch); Height: 1.5 mm;
B39242B8857L210
Rf360 Europe
B39242B8857L210 by Rf360 Europe is a SAW FILTER with 2.4 dB Max Insertion Loss, 2442 MHz Center Frequency, and Gold (Au) finish. Ideal for applications requiring 50 OHM impedance, it operates b/w -30 to 85 °C in surface mount configurations.
B39242B3912U410
TDK
The TDK B39242B3912U410 SAW Filter has 6 terminals, operates b/w -40°C to 85°C, with a center frequency of 2448.5 MHz. It offers low insertion loss of 3 dB and is ideal for applications requiring a compact surface mount filter in automotive electronics.
SF0070CF51851T
SAW FILTER; Width (mm): 12.7; Package Material: PLASTIC; No. of Terminals: 6; Maximum Insertion Loss: 25.5 dB; Center/Cutoff Frequency (fo/fc): 70 MHz;
ACMC-7701-BLK
Broadcom
SAW FILTER; Maximum Operating Temperature: 85 Cel; Package Material: PLASTIC; Minimum Operating Temperature: -30 Cel; Mounting Type: SURFACE MOUNT;
SF0869BA02618S
SAW FILTER; Length: 3 mm; Impedance (Input): 50 OHM; Package Material: CERAMIC; Maximum Operating Temperature: 75 Cel; JESD-609 Code: e3;
SF1141B
Murata Manufacturing
Murata Manufacturing's SF1141B SAW Filter has 10 terminals, operates b/w -40°C to 85°C. With a width of 5.2mm and length of 7.2mm, it offers a max insertion loss of 16 dB at 75 MHz center frequency. Ideal for surface mount applications with input/output impedance of 250 ohms.
SF0244CN03098S
SAW FILTER; Mounting Type: SURFACE MOUNT; Width (mm): 3.785; Maximum Operating Temperature: 50 Cel; Height: 1.56 mm; Length: 11.405 mm;
B39321B3761Z810
SAW FILTER; Minimum Operating Temperature: -45 Cel; Maximum Insertion Loss: 2.6 dB; Width (mm): 3.8; Additional Features: INSERTION LOSS INCLUDING LOSS IN MATCHING ELEMENTS; Maximum Operating Temperature: 95 Cel;
B39311B3713U410
SAW FILTER; Width (mm): 3.0; No. of Terminals: 6; Height: 1.1 mm; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Output Impedance (ohm): 50 OHM;
857193
Qorvo
Qorvo's 857193 SAW Filter has 6 terminals, operates b/w -30°C to 100°C, with a width of 3.0mm. It offers a max insertion loss of 4 dB at 725.5 MHz center frequency and is ideal for applications requiring a surface mount filter with an impedance of 50 OHM.
SAFFB780MAA0F0AR1X
SAW FILTER; Additional Features: TR, EMBOSSED, 7 INCH; Width (mm): 0.9; Dimensions: L1.1XB0.9XH0.5 (mm)/L0.043XB0.035XH0.02 (inch); No. of Functions: 1; Length: 1.1 mm;
B39162B3413U410
SAW FILTER; Width (mm): 3.0; Height: 1.1 mm; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Additional Features: AEC-Q200; Maximum Operating Temperature: 85 Cel;
SF14-1575F5UUA1
Kyocera
Kyocera SF14-1575F5UUA1 SAW Filter operates b/w -30°C to 85°C, with 1.2 dB max insertion loss at 1575 MHz. Designed for surface mount, it has 5 terminals and impedance of 50Ω, suitable for applications requiring precise frequency filtering.
SF0456BA02444S
SAW FILTER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length: 7 mm; Maximum Insertion Loss: 13 dB;
B39781B5325U410
TDK B39781B5325U410 SAW Filter, with 780.5 MHz fo/fc, 4.2 dB Max Insertion Loss, and 50 OHM Impedance is ideal for RF applications. Surface mountable at -40 to 125°C, it's compact (3x3x1.1mm) making it suitable for space-constrained designs in various electronic devices.
SF0044BA03190S
SAW FILTER; Maximum Insertion Loss: 25 dB; Mounting Type: SURFACE MOUNT; Length: 24.6 mm; No. of Terminals: 10; JESD-609 Code: e3;
TA0232A
Tai-saw Technology
TA0232A by Tai-saw Technology is a SAW FILTER with 8 terminals, operating from -45 to 85 °C. It has a width of 3.8mm and max insertion loss of 5.3 dB at 1090 MHz. Ideal for applications requiring a compact surface mount filter with impedance of 50 OHM.
SF0147BA02468S
SAW FILTER; Center/Cutoff Frequency (fo/fc): 147 MHz; No. of Terminals: 10; Height: 1.75 mm; Impedance (Input): 50 OHM; Length: 9.1 mm;
SF1141B-4
SF1141B-4 by Murata Manufacturing is a SAW filter with 12 terminals, gold finish. It operates b/w -40 to 85 °C and has a width of 5.2mm. With a center frequency of 75 MHz and impedance of 250 OHM, it's ideal for surface mount applications requiring low insertion loss.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF0140BA02487S
SAW FILTER; Width (mm): 9.0; Height: 1.64 mm; No. of Terminals: 10; Terminal Finish: Matte Tin (Sn); No. of Functions: 1;
SF0140BA02167S
SAW FILTER; Impedance (Input): 50 OHM; No. of Functions: 1; Terminal Finish: Matte Tin (Sn); Length: 13.33 mm; Output Impedance (ohm): 50 OHM;
SF0115CD02260T
SAW FILTER; Maximum Insertion Loss: 19 dB; JESD-609 Code: e3; Length: 22.1 mm; Height: 5.33 mm; Impedance (Input): 50 OHM;
SF0140BA02457S
SAW FILTER; Maximum Insertion Loss: 13 dB; Center/Cutoff Frequency (fo/fc): 140 MHz; Width (mm): 6.5; Impedance (Input): 50 OHM; No. of Functions: 1;
SF0140BA02393S
SAW FILTER; No. of Functions: 1; Height: 1.75 mm; JESD-609 Code: e0; Width (mm): 7.1; Length: 9.1 mm;
SF0130BA03030T
SAW FILTER; Maximum Operating Temperature: 50 Cel; Package Material: PLASTIC; Center/Cutoff Frequency (fo/fc): 130 MHz; Height: 5.33 mm; Length: 22.1 mm;
SF0111BA02639S
SAW FILTER; Impedance (Input): 50 OHM; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Package Material: CERAMIC;
SF0140BA02360T
SAW FILTER; No. of Terminals: 14; Dimensions: L22.1XB12.7XH5.33 (mm)/L0.87XB0.5XH0.21 (inch); Output Impedance (ohm): 50 OHM; JESD-609 Code: e3; Height: 5.33 mm;
SF0120BA03167S
SAW FILTER; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Length: 7 mm; Dimensions: L7.0XB5.0XH2.0 (mm)/L0.276XB0.197XH0.079 (inch); Output Impedance (ohm): 50 OHM;
SF0140BA02450S
SAW FILTER; Maximum Insertion Loss: 11 dB; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: 0 Cel; Mounting Type: SURFACE MOUNT; No. of Terminals: 12;
SF0140BA02433T
SAW FILTER; Impedance (Input): 50 OHM; Height: 5.33 mm; Terminal Finish: Matte Tin (Sn); Length: 27.18 mm; JESD-609 Code: e3;
SF0130BA02247T
SAW FILTER; Output Impedance (ohm): 50 OHM; Height: 5.33 mm; No. of Terminals: 14; Dimensions: L22.4XB12.9XH5.33 (mm)/L0.882XB0.508XH0.21 (inch); Impedance (Input): 50 OHM;
SF0140BA02486S
SAW FILTER; Output Impedance (ohm): 50 OHM; Dimensions: L24.64XB9.0XH1.64 (mm)/L0.97XB0.354XH0.065 (inch); Width (mm): 9.0; Maximum Insertion Loss: 25 dB; Mounting Type: SURFACE MOUNT;
SF0115CD01490T
SAW FILTER; Output Impedance (ohm): 50 OHM; Length: 24.9 mm; Width (mm): 12.95; Package Material: PLASTIC; Impedance (Input): 50 OHM;
SF0140BA01992S
SAW FILTER; Length: 13.33 mm; Terminal Finish: Matte Tin (Sn); Center/Cutoff Frequency (fo/fc): 140 MHz; No. of Functions: 1; Width (mm): 6.5;
SF0108BA03004S
SAW FILTER; Center/Cutoff Frequency (fo/fc): 107.6 MHz; Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM; Height: 1.97 mm; Dimensions: L13.3XB6.5XH1.97 (mm)/L0.524XB0.256XH0.078 (inch);
SF0115BA03227S
SAW FILTER; Width (mm): 5.0; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
SF0127CN02333S
SAW FILTER; Width (mm): 9.0; Center/Cutoff Frequency (fo/fc): 127.5 MHz; No. of Terminals: 10; No. of Functions: 1; Impedance (Input): 50 OHM;
SF0140BA02434S
SAW FILTER; Minimum Operating Temperature: 0 Cel; JESD-609 Code: e3; Impedance (Input): 50 OHM; No. of Terminals: 10; Maximum Insertion Loss: 22 dB;
SF0140BA03010T
Api Technologies
SAW FILTER; Center/Cutoff Frequency (fo/fc): 140 MHz; Impedance (Input): 50 OHM; No. of Functions: 1; Width (mm): 12.7; Dimensions: L22.1XB12.7XH5.33 (mm)/L0.87XB0.5XH0.21 (inch);
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved