Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAW FILTER; Length: 13.33 mm; Terminal Finish: Matte Tin (Sn); Center/Cutoff Frequency (fo/fc): 140 MHz; No. of Functions: 1; Width (mm): 6.5;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SAW Filters SF0140BA01992S attributes and parameters. Explore more SAW Filters devices from Renesas Electronics
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Output Impedance (ohm):
Dimensions:
Terminal Finish:
Width (mm):
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
DS18B20+
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Electronic Devices
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
Jinan Jingheng Electronics
Onsemi
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Sangdest Microelectronics (Nanjing)
TA0741B
Tai-saw Technology
TA0741B by Tai-saw Tech: SAW Filter with 6 terminals, fo/fc at 2067.5 MHz, and max insertion loss of 4 dB. Ideal for applications requiring a compact surface-mount filter with an operating temp range of -40 to 85°C.
SF0070CD03096T
Renesas Electronics
SAW FILTER; Center/Cutoff Frequency (fo/fc): 70 MHz; JESD-609 Code: e3; Output Impedance (ohm): 50 OHM; Mounting Type: THROUGH HOLE MOUNT; Impedance (Input): 50 OHM;
SF0434BA02617S
SAW FILTER; Maximum Operating Temperature: 75 Cel; Maximum Insertion Loss: 2.7 dB; JESD-609 Code: e3; Center/Cutoff Frequency (fo/fc): 434 MHz; Length: 3 mm;
SF0038BA01943T
SAW FILTER; Dimensions: L35.1XB20.6XH5.1 (mm)/L1.382XB0.811XH0.201 (inch); Length: 35.1 mm; Maximum Insertion Loss: 25 dB; Terminal Finish: Matte Tin (Sn); Mounting Type: THROUGH HOLE MOUNT;
SAFFB1G56KB0F0AR1X
Murata Manufacturing
SAW FILTER; Additional Features: TR, EMBOSSED, 7 INCH; Width (mm): 0.9; Height: .5 mm; Dimensions: L1.1XB0.9XH0.5 (mm)/L0.043XB0.035XH0.02 (inch); No. of Functions: 1;
SF1141B-4
SF1141B-4 by Murata Manufacturing is a SAW filter with 12 terminals, gold finish. It operates b/w -40 to 85 °C and has a width of 5.2mm. With a center frequency of 75 MHz and impedance of 250 OHM, it's ideal for surface mount applications requiring low insertion loss.
B39141B5235Z810
TDK
The TDK B39141B5235Z810 SAW Filter has 8 terminals, operates b/w -40°C to 85°C, with a width of 3.8mm. It offers a max insertion loss of 12.5 dB at 140 MHz center frequency and is ideal for applications requiring a surface mount filter with impedance of 50 OHM.
SF0730BA03164S
SAW FILTER; No. of Functions: 1; JESD-609 Code: e0; Maximum Insertion Loss: 4.2 dB; Dimensions: L3.8XB3.8XH1.5 (mm)/L0.15XB0.15XH0.059 (inch); No. of Terminals: 6;
B39871B3440U410
The TDK B39871B3440U410 is a SAW filter with 6 terminals, operating from -40 to 85°C. It has a width of 3.0mm and max insertion loss of 3.2 dB at 869 MHz. Ideal for applications requiring a surface mount filter with a center frequency of 869 MHz and impedance of 50 ohms.
SBU40ML
SAW FILTER; Manufacturer Series: SBU40ML; Mounting Type: THROUGH HOLE MOUNT; Output Impedance (ohm): 50 OHM; No. of Functions: 1; Maximum Operating Temperature: 70 Cel;
F047MSL
SAW-VIDEO/SOUND FILTER; Minimum Operating Temperature: -20 Cel; Dimensions: L16.3XB6.3XH4.0 (mm)/L0.642XB0.248XH0.157 (inch); Impedance (Input): 16.4 pF OHM; No. of Functions: 1; Length: 16.3 mm;
B619
Infineon Technologies
SAW FILTER; Center/Cutoff Frequency (fo/fc): 479.5 MHz;
SF0077BA03082S
SAW FILTER; JESD-609 Code: e3; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -10 Cel; No. of Functions: 1; Terminal Finish: Matte Tin (Sn);
B39162B3913U410
Rf360 Europe
SAW FILTER; Center/Cutoff Frequency (fo/fc): 1588 MHz; Maximum Operating Temperature: 85 Cel; Height: 1.1 mm; Impedance (Input): 50 OHM; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
B39431B3748H110
The TDK B39431B3748H110 SAW Filter has a center frequency of 434.42 MHz and max insertion loss of 2.6 dB. With gold terminal finish, it operates b/w -45°C to 95°C, ideal for surface mount applications in various electronic devices requiring impedance of 350 OHM//2.2 pF.
B39262B5308U410
The TDK B39262B5308U410 SAW Filter has 6 terminals, operates b/w -30°C to 100°C, with a width of 3.0mm. It offers a max insertion loss of 2.8 dB at a center frequency of 2595 MHz and impedance of 50 OHM. Ideal for surface mount applications in various electronic devices requiring precise signal filtering.
SF0044BA01081T
SAW-VIDEO/SOUND FILTER; JESD-609 Code: e3; No. of Functions: 1; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Length: 35.05 mm;
F072FSL
SAW-VIDEO/SOUND FILTER; Length: 16.3 mm; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -20 Cel; Mounting Type: THROUGH HOLE MOUNT; Output Impedance (ohm): 4.5 pF OHM;
HWCA208
SAW FILTER;
SF1843BA02590S
SAW FILTER; Dimensions: L3.0XB3.0XH1.5 (mm)/L0.118XB0.118XH0.059 (inch); Terminal Finish: Matte Tin (Sn); Width (mm): 3.0; Impedance (Input): 50 OHM; No. of Terminals: 6;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF0140BA02487S
SAW FILTER; Width (mm): 9.0; Height: 1.64 mm; No. of Terminals: 10; Terminal Finish: Matte Tin (Sn); No. of Functions: 1;
SF0140BA02167S
SAW FILTER; Impedance (Input): 50 OHM; No. of Functions: 1; Terminal Finish: Matte Tin (Sn); Length: 13.33 mm; Output Impedance (ohm): 50 OHM;
SF0115CD02260T
SAW FILTER; Maximum Insertion Loss: 19 dB; JESD-609 Code: e3; Length: 22.1 mm; Height: 5.33 mm; Impedance (Input): 50 OHM;
SF0140BA02457S
SAW FILTER; Maximum Insertion Loss: 13 dB; Center/Cutoff Frequency (fo/fc): 140 MHz; Width (mm): 6.5; Impedance (Input): 50 OHM; No. of Functions: 1;
SF0140BA02393S
SAW FILTER; No. of Functions: 1; Height: 1.75 mm; JESD-609 Code: e0; Width (mm): 7.1; Length: 9.1 mm;
SF0130BA03030T
SAW FILTER; Maximum Operating Temperature: 50 Cel; Package Material: PLASTIC; Center/Cutoff Frequency (fo/fc): 130 MHz; Height: 5.33 mm; Length: 22.1 mm;
SF0140BA03008T
SAW FILTER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn); Output Impedance (ohm): 50 OHM; Center/Cutoff Frequency (fo/fc): 140 MHz; Height: 5.33 mm;
SF0111BA02639S
SAW FILTER; Impedance (Input): 50 OHM; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Package Material: CERAMIC;
SF0140BA02360T
SAW FILTER; No. of Terminals: 14; Dimensions: L22.1XB12.7XH5.33 (mm)/L0.87XB0.5XH0.21 (inch); Output Impedance (ohm): 50 OHM; JESD-609 Code: e3; Height: 5.33 mm;
SF0120BA03167S
SAW FILTER; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Length: 7 mm; Dimensions: L7.0XB5.0XH2.0 (mm)/L0.276XB0.197XH0.079 (inch); Output Impedance (ohm): 50 OHM;
SF0140BA02450S
SAW FILTER; Maximum Insertion Loss: 11 dB; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: 0 Cel; Mounting Type: SURFACE MOUNT; No. of Terminals: 12;
SF0140BA02433T
SAW FILTER; Impedance (Input): 50 OHM; Height: 5.33 mm; Terminal Finish: Matte Tin (Sn); Length: 27.18 mm; JESD-609 Code: e3;
SF0130BA02247T
SAW FILTER; Output Impedance (ohm): 50 OHM; Height: 5.33 mm; No. of Terminals: 14; Dimensions: L22.4XB12.9XH5.33 (mm)/L0.882XB0.508XH0.21 (inch); Impedance (Input): 50 OHM;
SF0140BA02486S
SAW FILTER; Output Impedance (ohm): 50 OHM; Dimensions: L24.64XB9.0XH1.64 (mm)/L0.97XB0.354XH0.065 (inch); Width (mm): 9.0; Maximum Insertion Loss: 25 dB; Mounting Type: SURFACE MOUNT;
SF0115CD01490T
SAW FILTER; Output Impedance (ohm): 50 OHM; Length: 24.9 mm; Width (mm): 12.95; Package Material: PLASTIC; Impedance (Input): 50 OHM;
SF0108BA03004S
SAW FILTER; Center/Cutoff Frequency (fo/fc): 107.6 MHz; Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM; Height: 1.97 mm; Dimensions: L13.3XB6.5XH1.97 (mm)/L0.524XB0.256XH0.078 (inch);
SF0115BA03227S
SAW FILTER; Width (mm): 5.0; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
SF0127CN02333S
SAW FILTER; Width (mm): 9.0; Center/Cutoff Frequency (fo/fc): 127.5 MHz; No. of Terminals: 10; No. of Functions: 1; Impedance (Input): 50 OHM;
SF0140BA02434S
SAW FILTER; Minimum Operating Temperature: 0 Cel; JESD-609 Code: e3; Impedance (Input): 50 OHM; No. of Terminals: 10; Maximum Insertion Loss: 22 dB;
SF0140BA01992S
Api Technologies
SAW FILTER; No. of Terminals: 12; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 140 MHz;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved