Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Forward Voltage: 1.4 V; Spectral Bandwidth: 60 m;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Infrared LEDs SE304 attributes and parameters. Explore more Infrared LEDs devices from Renesas Electronics
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Semiconductor Material:
Spectral Bandwidth:
Sub-Category:
Terminal Finish:
Viewing Angle:
SE304 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Semiconductor Technology
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Semtech Electronics
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
TIL905-1
TIL905-1 by Texas Instruments is an Infrared LED with peak wavelength of 880nm, max forward current of 0.1A, and viewing angle of 50°. It operates b/w -40°C to 85°C, has response time of 0.0000006s, and reverse voltage up to 3V. Ideal for applications requiring precise IR illumination in a through-hole mounting setup.
NDL5302P
Renesas Electronics
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Semiconductor Material: InGaAs; Maximum Forward Current: .15 A; Minimum Operating Temperature: -20 Cel;
TSAL6100
Vishay Telefunken
INFRARED LED; Shape: ROUND; Nominal Output Power: 35 W; Size: 5 mm; No. of Functions: 1; Minimum Operating Temperature: -55 Cel;
SFH480-3
Infineon Technologies
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Response Time: .0000006 s; Semiconductor Material: AlGaAs; Peak Wavelength (nm): 880;
TSSF4500
Telefunken Microelectronics
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .1 A; Peak Wavelength (nm): 870; Maximum Forward Voltage: 1.6 V;
ASDL-4770-C41
Broadcom
INFRARED LED; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; JESD-609 Code: e3; No. of Functions: 1; Shape: ROUND;
ASDL-4772-C41
INFRARED LED; Terminal Finish: Matte Tin (Sn); Peak Wavelength (nm): 940; JESD-609 Code: e3; Shape: ROUND; Size: 1.6 mm;
LTE-302-M
Lite-on Technology
Lite-on Technology's LTE-302-M is a 1.5mm ROUND INFRARED LED with peak wavelength of 940nm and max forward current of 0.05A. Ideal for applications requiring IR light emission, it operates b/w -40 to 85°C making it suitable for various optoelectronic projects.
SFH487P2
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Spectral Bandwidth: 80 m; Peak Wavelength (nm): 880; Maximum Reverse Voltage: 5 V;
HSDL-4230
Hewlett Packard
INFRARED LED; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 70 Cel; No. of Functions: 1; Configuration: SINGLE;
SFH487-3
Siemens
INFRARED LED; Shape: ROUND; Maximum Forward Current: .1 A; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; Peak Wavelength (nm): 880;
SFH4250-S
Osram Opto Semiconductors
Osram Opto Semiconductors SFH4250-S is a 2.4mm INFRARED LED with peak wavelength of 850nm, suitable for applications requiring 40W output power. It has a max forward current of 0.1A and operates b/w -40 to 100°C, making it ideal for surface mount configurations in various electronic devices.
SFH4231
INFRARED LED; Shape: ROUND; No. of Functions: 1; Configuration: SINGLE WITH BUILT-IN PHOTO DIODE; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: 1 A;
TSFF5210
Vishay Intertechnology's TSFF5210 is a 5mm IR LED with peak wavelength of 870nm, max forward current of 0.1A, and viewing angle of 20°. Ideal for applications requiring infrared illumination in temperatures ranging from -40°C to 85°C.
TSHA4400
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Viewing Angle: 40 deg; Semiconductor Material: GaAlAs; Maximum Response Time: .0000005 s; Maximum Forward Voltage: 1.8 V;
Agilent Technologies
INFRARED LED; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 875; Size: 5 mm; JESD-609 Code: e0; Maximum Forward Current: .1 A;
AREQ-8020-MP000
INFRARED LED; Mounting Feature: SURFACE MOUNT; Terminal Finish: Silver (Ag); JESD-609 Code: e4; Peak Wavelength (nm): 850; Packing Method: TR, 7 INCH;
HR5P-N4FA-00000
INFRARED LED; Mounting Feature: RADIAL MOUNT; Size: 5 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Configuration: SINGLE;
SFH426
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .1 A; Semiconductor Material: GaAlAs; Minimum Operating Temperature: -55 Cel; Peak Wavelength (nm): 880;
SFH464
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .05 A; Maximum Forward Voltage: 2.8 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SE301A
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Semiconductor Material: GaAs; Maximum Reverse Voltage: 5 V; Maximum Forward Voltage: 1.4 V;
SE302A
Infrared LEDs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Response Time: .000001 s; JESD-609 Code: e0; Spectral Bandwidth: 60 m;
SE303
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Spectral Bandwidth: 60 m; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e0;
SE303A
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Semiconductor Material: GaAs; Spectral Bandwidth: 60 m; Maximum Forward Current: .1 A;
SE303A-C
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .1 A; Maximum Reverse Voltage: 5 V; Maximum Response Time: .000001 s;
SE306
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Spectral Bandwidth: 60 m; Peak Wavelength (nm): 940; Maximum Operating Temperature: 100 Cel;
SE307
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .1 A; JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel;
SE307C
SE308
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Peak Wavelength (nm): 940; Maximum Forward Voltage: 1.4 V;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved