Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOW SKEW CLOCK DRIVER; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Terminal Finish: TIN; JESD-609 Code: e3;
Median Price
$3.690
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$2.306
1k+ parts
$2.056
10k+ parts
$1.956
Renesas
Component Sense
-
Component Stockers USA
$24.380
iodParts Technologies Inc.
Clock Drivers & Buffers RC19008A100GND#KB0 attributes and parameters. Explore more Clock Drivers & Buffers devices from Renesas Electronics
JESD-609 Code:
Logic IC Type:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Terminal Finish:
RC19008A100GND#KB0 Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Toshiba
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Won-top Electronics
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Comchip Technology
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
Laube Technology
ICS8305AGILFT
Integrated Circuit Systems
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
ICS574MLF
Renesas Electronics
The Renesas Electronics ICS574MLF is a Clock Driver & Buffer with 3.3V supply voltage, 8 terminals, and 160MHz fmax. It is used in applications requiring precise timing control, such as communication systems and data processing equipment.
9DB803DFILFT
Integrated Device Technology
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: SSOP; Package Shape: RECTANGULAR;
ZL40223LDG1
Microsemi
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SY89833ALMG
Microchip Technology
SY89833ALMG clock driver by Microchip operates at 3.3V with 0.47ns propagation delay, suitable for industrial applications. Features include differential input conditioning, 16 terminals in a square package style, and 4 true outputs with a min fmax of 2000MHz.
83058AGILF
LOW SKEW CLOCK DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN; Peak Reflow Temperature (C): 260;
CY2308SXC-4
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
551SCMGI
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: VSON; Package Shape: SQUARE;
74FCT3807PYG8
Renesas Electronics' 74FCT3807PYG8 is a Clock Driver & Buffer with 4.8 ns Propagation Delay, suitable for applications requiring precise timing synchronization. Operating at 3.3V, it features 20 terminals in a small outline package, making it ideal for commercial-grade projects needing high-speed signal distribution.
SN65ELT20DGKR
SN65ELT20DGKR clock driver by Texas Instruments features 1.25 ns propagation delay, operates in industrial temperature range (-40 to 85 °C), and has a supply voltage range of 4.2V to 5.7V. Ideal for applications requiring precise timing control in compact electronic systems.
CDCVF2310PW
CDCVF2310PW by Texas Instruments is a clock driver & buffer with a propagation delay of 3.5 ns, operating at a voltage range of 2.3V to 3.6V. It is commonly used in industrial applications requiring high-speed signal transmission and precise timing control.
9ZX21200AKLFT
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;
8SLVP1208ANBGI
Renesas Electronics clock driver 8SLVP1208ANBGI features 0.41 ns propagation delay, 2.5V nominal voltage, and differential mux input conditioning. Ideal for industrial applications requiring precise timing synchronization in a compact square package with surface mount capability.
874003AGI-02LF
PLL BASED CLOCK DRIVER; Peak Reflow Temperature (C): 260; Packing Method: TUBE; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Terminal Finish: TIN;
CY7B991V-5JXIT
Cypress Semiconductor
CY7B991V-5JXIT clock driver by Cypress Semiconductor has 0.7 ns propagation delay, 3.3V nominal voltage, and 32 terminals. Ideal for industrial applications, it offers 4 true outputs with a max frequency of 80 MHz in a rectangular chip carrier package.
5PB1104CMGI8
Renesas Electronics clock driver 5PB1104CMGI8 has a propagation delay of 2.5 ns, operates at 1.8V, and offers 4 true outputs. Ideal for applications requiring precise timing control in compact designs with surface mount capability and small outline package style.
CDCLVP1208RHDT
CDCLVP1208RHDT clock driver by Texas Instruments features a propagation delay of 0.45 ns, operates at 2.5/3.3V, and has 28 terminals in a square chip carrier package. Ideal for industrial applications requiring differential mux input conditioning and a max operating temperature of 85°C.
CY2309SXC-1H
CDCLVP1102RGTR
CDCLVP1102RGTR by Texas Instruments is a clock driver with 0.45 ns propagation delay, suitable for industrial applications. It operates at 2.5V nominal voltage and has 16 terminals in a square package shape. With differential input conditioning and open-emitter output characteristics, it offers high performance with a max operating temperature of 85°C.
CDCLVD2106RHAT
CDCLVD2106RHAT by Texas Instruments is a clock driver with 2.5ns propagation delay, suitable for industrial applications. It features differential input conditioning, operates at 2.5V, and has 40 terminals in a square chip carrier package style. With a max operating temperature of 85°C and peak reflow temperature of 260°C, it offers six true outputs with a min frequency of 800MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RC19020AGN6#BD0
LOW SKEW CLOCK DRIVER; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 3; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260;
RC19013AGNG#BB0
LOW SKEW CLOCK DRIVER; Terminal Finish: TIN; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
RC19008A100GND#BB0
RC19020A072GN2#BB0
LOW SKEW CLOCK DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
RC19016A100GN1#BB0
LOW SKEW CLOCK DRIVER; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Terminal Finish: TIN; Peak Reflow Temperature (C): 260;
RC19013A100GNG#BB0
LOW SKEW CLOCK DRIVER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN; JESD-609 Code: e3;
RC19020AGN6#KD0
LOW SKEW CLOCK DRIVER; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; JESD-609 Code: e4; Terminal Finish: NICKEL PALLADIUM GOLD;
RC19004A100GNL#KB0
LOW SKEW CLOCK DRIVER; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN;
RC19013AGNG#KB0
LOW SKEW CLOCK DRIVER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Terminal Finish: TIN;
RC19016AGN1#KB0
LOW SKEW CLOCK DRIVER; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
RC19016A100GN1#KB0
LOW SKEW CLOCK DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: TIN; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3;
RC19008AGND#KB0
LOW SKEW CLOCK DRIVER; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN;
RC19020A072GN2#KB0
LOW SKEW CLOCK DRIVER; JESD-609 Code: e3; Terminal Finish: TIN; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
RC19004AGNL#KB0
LOW SKEW CLOCK DRIVER; Terminal Finish: TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
RC19013A100GNG#KB0
RC19004A100GNL#BB0
LOW SKEW CLOCK DRIVER; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
RC19004AGNL#BB0
LOW SKEW CLOCK DRIVER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Terminal Finish: TIN; Peak Reflow Temperature (C): 260;
RC19008AGND#BB0
RC19016AGN1#BB0
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved