Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Renesas Electronics ICS570BILF clock driver features 3.3V nominal voltage, 12A max I (ol), and 168MHz min fmax. It is used in industrial applications requiring precise timing synchronization and signal buffering with a small outline package style.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Pegasus Components GmbH
Nova Conductors
Euro-Tech
Andel Nordic
$3.164
$3.037
Corohmni
$12.660
AZTECH Wire
$18.993
Semicontronic
$43.000
$41.925
$41.710
Authorized Procurement Solutions
Continental Prestige Electronics
A-Z Elektronik GmbH
Argo Parts USA
Alle Elektronik GmbH
Kepictronics
Assy Fe
Perfect Parts
Bastille Electronics
Provides durability and protection for internal components, ensuring a longer lifespan for the product.
Optimal supply voltage for efficient and stable operation of the product.
Can withstand high temperature environments, making it suitable for industrial applications.
Operational in a wide range of temperatures, making it versatile for different environments.
CMOS technology provides low power consumption and high noise immunity, enhancing the product's performance.
Safe operating voltage range to prevent damage to the product and ensure reliability.
Clock Drivers & Buffers ICS570BILF attributes and parameters. Explore more Clock Drivers & Buffers devices from Renesas Electronics
Family:
Input Conditioning:
JESD-30 Code:
JESD-609 Code:
Length:
Logic IC Type:
Maximum I (ol):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Inverted Outputs:
No. of Terminals:
No. of True Outputs:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Same Edge Skew (tskwd):
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Minimum fmax:
ICS570BILF Logic ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Rectron
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
International Semiconductor
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148W-T
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
Weitronic Enterprise
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
SI53307-B-GMR
Silicon Labs
SI53307-B-GMR by Silicon Labs is a Clock Driver with 1.075 ns Propagation Delay, 16 Terminals, and 5 pF Load Capacitance. It is used in applications requiring precise timing control and signal synchronization, such as high-speed data communication systems or industrial automation equipment.
CDCLVD2106RHAT
Texas Instruments
CDCLVD2106RHAT by Texas Instruments is a clock driver with 2.5ns propagation delay, suitable for industrial applications. It features differential input conditioning, operates at 2.5V, and has 40 terminals in a square chip carrier package style. With a max operating temperature of 85°C and peak reflow temperature of 260°C, it offers six true outputs with a min frequency of 800MHz.
ZL40213LDG1
Microsemi
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
NB3N551DR2G
NB3N551DR2G clock driver by Onsemi features 6ns propagation delay, 3.3V nominal voltage, and 180MHz min fmax. Ideal for industrial applications requiring clock distribution with 4 true outputs in a small outline package.
ICS574MLF
Renesas Electronics
The Renesas Electronics ICS574MLF is a Clock Driver & Buffer with 3.3V supply voltage, 8 terminals, and 160MHz fmax. It is used in applications requiring precise timing control, such as communication systems and data processing equipment.
LMK00105SQE/NOPB
LMK00105SQE/NOPB by Texas Instruments is a Clock Driver & Buffer with 2.8 ns Propagation Delay, 3.3V Nominal Voltage, and 10 pF Load Capacitance. It is used in applications requiring precise timing control such as industrial automation systems or telecommunications equipment.
ZL40212LDG1
Microchip Technology
ZL40212LDG1 clock driver by Microchip operates at 2.5V with 2ns propagation delay. It features differential input conditioning, quad terminal position, and 4 true outputs. Ideal for industrial applications requiring precise timing control in a compact square package.
ICS83026BMI-01LF
Renesas Electronics' ICS83026BMI-01LF is a Clock Driver with 3.1ns Propagation Delay, suitable for industrial applications. It operates at 3.3V, has 8 terminals, and offers 2 True Outputs. The device features a small outline package and differential input conditioning for precise timing requirements.
CY2308SXC-1H
Cypress Semiconductor
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SY89833LMG-TR
Micrel
Micrel SY89833LMG-TR is a clock driver with 16 terminals, operating at 3.3V. It offers 0.6ns propagation delay, supports up to 2000MHz fmax, and has industrial temperature grade. Ideal for applications requiring high-speed signal conditioning in compact designs.
CDC340DW
The Texas Instruments CDC340DW clock driver has a propagation delay of 4.8 ns, operates at 5V, and offers 8 true outputs. It is ideal for applications requiring precise timing control in commercial-grade environments. The small outline package with gull wing terminals makes it suitable for surface mount assembly.
LMK1C1104DQFR
LMK1C1104DQFR clock driver by Texas Instruments features 3ns propagation delay, 1.8V nominal voltage, and 250MHz min fmax. Ideal for automotive applications, this device is a surface-mount package with 8 terminals and standard input conditioning.
ZL40222LDF1
ZL40222LDF1 clock driver by Microchip operates at 2.5V, with a propagation delay of 2ns. It features 16 true outputs and is ideal for industrial applications requiring differential mux input conditioning in a compact square package.
PI6C10804WE
Diodes Incorporated
PI6C10804WE clock driver by Diodes Inc. has a propagation delay of 3ns, operates at 1.8V, and offers 4 true outputs at up to 250MHz. Ideal for industrial applications requiring precise timing control in compact designs with surface-mount capability.
49FCT3805SOGI
The Renesas Electronics 49FCT3805SOGI clock driver features a propagation delay of 5.8 ns, Schmitt trigger input conditioning, and 3-state output characteristics. It is ideal for applications requiring precise timing control in electronic systems with a supply voltage of 3.3V. The small outline package with dual terminals and gull wing form makes it suitable for surface mount assembly processes at temperatures ranging from -40 to 85°C.
SI5330L-B00230-GM
Skyworks Solutions
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LMH2180SDX/NOPB
CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
IDT74FCT38074DCGI
The Renesas Electronics IDT74FCT38074DCGI clock driver has a 3ns propagation delay at 3.3V, suitable for industrial applications. With 4 true outputs and a max operating temperature of 85°C, it is designed for surface mount with a small outline package style. The device features standard input conditioning and GULL WING terminal form.
CDCVF310PW
The Texas Instruments CDCVF310PW clock driver has a 4ns propagation delay at 2.5V, with 24 terminals in a small outline package. It operates b/w -40 to 85°C and supports up to 200MHz frequency, ideal for industrial applications requiring precise timing control.
CY2305SXC-1HT
Infineon's CY2305SXC-1HT clock driver features 8 true outputs with a max frequency of 133.33 MHz. Operating at 3.3V, it has a propagation delay of 8.7 ns and supports standard input conditioning. Ideal for applications requiring precise timing control in commercial-grade environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ICS553MILFT
The Renesas Electronics ICS553MILFT clock driver has a propagation delay of 4ns, operates at 2.5V, and offers 3-STATE output characteristics. It is ideal for industrial applications requiring a small outline package with surface mount capability and standard input conditioning.
Integrated Circuit Systems
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Integrated Device Technology
ICS553MILF
The Renesas Electronics ICS553MILF clock driver has a propagation delay of 4ns, operates at 2.5V, and supports up to 200MHz frequency. It is used in industrial applications requiring precise timing synchronization and features a small outline package with surface mount capability.
ICS542MILFT
The Renesas Electronics ICS542MILFT clock driver features 15ns propagation delay, 3-STATE output, and 156MHz max frequency. Ideal for industrial applications requiring precise timing synchronization in a compact small outline package.
ICS570BILFT
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ICS551MILFT
ICS542MILF
ICS570BILF
ICS570BLFT
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ICS570BIT
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved