Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DSP PERIPHERAL, DIGITAL FILTER; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
Median Price
$121.290
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
< 1k
Rochester
1+ parts
-
100+ parts
$112.390
1k+ parts
$100.560
10k+ parts
$94.640
DigiKey
$130.190
DigiKey Marketplace
ABC Electronics Ltd.
Electronic Expediters
Electronics Depot
Beltway Electronics Company
J & M Industries LLC
Corohmni
$111.610
Vigor
$120.160
Component Stockers USA
$128.440
$120.730
A-Z Elektronik GmbH
Authorized Procurement Solutions
Alle Elektronik GmbH
Supply Digital
Assy Fe
DSP Peripherals HSP43220JC-25 attributes and parameters. Explore more DSP Peripherals devices from Renesas Electronics
Additional Features:
Boundary Scan:
Maximum Clock Frequency:
External Data Bus Width:
JESD-30 Code:
JESD-609 Code:
Length:
Low Power Mode:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Data Bus Width:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
HSP43220JC-25 Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1552200168
Molex
WIRE AND CABLE;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Semitronics
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Transistor
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MAX7469UTP
Maxim Integrated
DSP PERIPHERAL, DIGITAL FILTER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE;
ADSP1016SE
Analog Devices
Analog Devices' ADSP1016SE is a CMOS DSP peripheral with 68 terminals, operating b/w -55°C to 125°C. It features a 5V supply, suitable for military-grade applications requiring high-speed signal processing and multiplication capabilities in a square chip carrier package.
L64017ADMC
Broadcom
DSP PERIPHERAL, MULTIPLIER ACCUMULATOR/SUMMER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 64; Package Code: DIP; Package Shape: RECTANGULAR;
ADSP1010KD
ADSP1010KD by Analog Devices is a 64-terminal DSP Peripheral IC with CMOS technology, operating at 5V. It features a MULTIPLIER ACCUMULATOR/SUMMER and is ideal for commercial applications requiring a temperature range of 0-70°C in an IN-LINE package style.
ADSP-1012ATE
ADSP-1012ATE by Analog Devices is a 68-terminal DSP peripheral IC with CMOS technology, operating at -55 to 125 °C. It features a 5V supply, MILITARY grade, and QUAD terminal position. Ideal for applications requiring high-performance signal processing in harsh environments.
L64011ADMC
ADSP-3212TG
ADSP-3212TG by Analog Devices is a DSP peripheral with 32-bit output data bus width, operating at a max clock frequency of 17.24 MHz. It is designed for military-grade applications requiring a power supply of 5V and can operate in temperatures ranging from -55 to 125°C.
ADSP1016JE
ADSP1016JE by Analog Devices is a DSP Peripheral IC with CMOS technology, 68 terminals, and 5V supply voltage. It comes in a ceramic chip carrier package suitable for commercial applications requiring high-speed signal processing.
L64011DCM
ISL8700IBZ
Renesas Electronics
ISL8700IBZ by Renesas Electronics is a DSP peripheral with a max supply voltage of 12V and min of 2.5V. This small outline package IC operates b/w -40 to 85°C, making it suitable for address sequencing applications. With dual terminals and matte tin finish, it offers low power consumption at 0.4mA max supply current.
IMSA100-G21M
STMicroelectronics
IMSA100-G21M by STMicroelectronics is a military-grade DSP peripheral with a ceramic package and operates b/w -55 °C to 125 °C. It features 84 terminals, a max supply current of 360 mA, and nominal voltage of 5 V. Ideal for digital filtering applications in harsh environments.
HSP43891VC-33
DSP PERIPHERAL, DIGITAL FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
SN74LS261JP4
SN74LS261JP4 by Texas Instruments is a DSP peripheral IC with TTL technology. It features 16 terminals in an in-line package style, operating b/w 0°C to 70°C. Ideal for applications requiring a dual terminal position and commercial temperature grade.
ADSP-3128AKG
ADSP-3128AKG by Analog Devices is a DSP Peripheral with 16-bit output data bus width, 20 MHz max clock frequency, and CMOS technology. It is used in commercial applications for signal processing tasks requiring high-speed data processing capabilities.
ADSP-3221KG
ADSP-3221KG by Analog Devices is a DSP Peripheral with 32-bit output data bus width, operating at a max clock frequency of 10 MHz. It features a package style of GRID ARRAY and is suitable for applications requiring a floating-point processor in commercial temperature grade environments.
L64220GC-15
DSP PERIPHERAL, DIGITAL FILTER; Temperature Grade: COMMERCIAL; Terminal Form: PIN/PEG; No. of Terminals: 155; Package Code: PGA; Package Shape: SQUARE;
ADSP-1010AJD
ADSP-1010AJD by Analog Devices is a DSP Peripheral with 35-bit output data bus width, 5V power supply, and 64 terminals. It is used in applications requiring a CMOS technology-based DSP peripheral with multiplier accumulator/summer for commercial-grade temperature environments.
ADSP-1009AKN
ADSP-1009AKN by Analog Devices is a DSP Peripheral with 27-bit output data bus width, operating at 5V. It features a CMOS technology, suitable for commercial temperature grades. This IC type includes Multiplier Accumulator/Summer and is ideal for applications requiring high-speed signal processing.
ADSP-1008ASD
ADSP-1008ASD by Analog Devices is a DSP Peripheral with 19-bit output data bus width, operating at -55 to 125 °C. It has a supply voltage range of 4.5V to 5.5V and consumes up to 45mA current. Ideal for military-grade applications requiring a multiplier accumulator/summer peripheral IC in a compact IN-LINE package style.
L64017LM
DSP PERIPHERAL, MULTIPLIER ACCUMULATOR/SUMMER; Temperature Grade: MILITARY; Terminal Form: NO LEAD; No. of Terminals: 68; Package Code: QCCN; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSP45102SC-40Z
HSP45102SC-40Z by Renesas Electronics is a DSP peripheral with a max clock frequency of 40 MHz. It has a low power mode and operates at temperatures b/w 0°C to 70°C. This small outline package is suitable for applications requiring numeric controlled oscillators.
Intersil
DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
HSP48908JC-32
DSP PERIPHERAL, CONVOLVER; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
Harris Semiconductor
HSP45102SC-33Z
HSP45102SC-40
HSP45102SI-33
DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
HSP45102SI-40
HSP45106JC-33Z
DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
HSP45314VI
DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE; Maximum Supply Voltage: 5.5 V;
HSP48410JC-33
Rochester Electronics
DSP PERIPHERAL, HISTOGRAM PROCESSOR; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 84; Package Shape: SQUARE; Minimum Operating Temperature: 0 Cel;
DSP PERIPHERAL, HISTOGRAM PROCESSOR; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 84; Package Shape: SQUARE; External Data Bus Width: 24;
DSP PERIPHERAL, HISTOGRAM PROCESSOR; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved