Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SCR; Surface Mount: NO; Maximum On-state Current: 5 A; Maximum DC Gate Trigger Current: 10 mA; Maximum DC Gate Trigger Voltage: 1.5 V; Non Repetitive Peak On-state Current: 80 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$1.271
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$1.399
Silicon Controlled Rectifiers (SCR) 5P4SM-AZ attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from Renesas Electronics
Nominal Circuit Commutated Turn-off Time:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Leakage Current:
Non Repetitive Peak On-state Current:
Maximum On-state Voltage:
Maximum On-state Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Peak Reflow Temperature (C):
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
5P4SM-AZ Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
Siemens
Bkc Semiconductors
Semtech
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
RC0603JR-070RL
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
JAN2N2323S
Microsemi
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Repetitive Peak Off-state Leakage Current: 10 uA;
B512F-2
Crydom
The Crydom B512F-2 is a 27A SCR with 325A peak current, 600V reverse voltage, and 60mA gate trigger current. It's used in half-controlled bridge configurations with common cathode and built-in diode. Ideal for applications requiring high on-state current and reliable performance in temperatures ranging from -40°C to 125°C.
TT330N16KOFHPSA2
Infineon Technologies
Infineon's TT330N16KOFHPSA2 is a SCR with 1600V repetitive peak reverse voltage, 520A max RMS on-state current, and 200mA DC gate trigger current. It features a series connected, center tap configuration with 2 elements. Ideal for high-power applications requiring precise switching control in industrial equipment.
40TPS12PBF
International Rectifier
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; No. of Terminals: 3;
VS-181RKI100PBF
Vishay Intertechnology
VS-181RKI100PBF by Vishay Intertechnology is a single SCR with max DC gate trigger current of 150mA, non-repetitive peak on-state current of 4000A, and max on-state current of 180A. Ideal for high-current applications requiring a reliable silicon-controlled rectifier with a max operating temperature of 125°C.
TICP106D
Texas Instruments
TICP106D by Texas Instruments is a Silicon Controlled Rectifier with max. DC Gate Trigger Current of 0.2mA, On-state Current of 2A, and Off-state Voltage of 400V. It is ideal for applications requiring precise current control in power electronics circuits.
MCC312-16IO1
IXYS Corporation
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Case Connection: ISOLATED;
MCC44-12IO1B
C106D1
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 400 V; Maximum On-state Current: 4 A; Maximum Leakage Current: .1 mA; Minimum Operating Temperature: -40 Cel;
VS-30TPS16-M3
VS-30TPS16-M3 by Vishay Intertechnology is a Silicon Controlled Rectifier with 300A Non Repetitive Peak On-state Current, 20A Max On-state Current, and 2.5V Max DC Gate Trigger Voltage. Ideal for applications requiring high current handling such as power supplies, motor control, and industrial equipment due to its robust design and wide operating temperature range from -40°C to 125°C.
L522F
The Crydom L522F is a 2-element SCR with max. on-state current of 27A and non-repetitive peak on-state current of 300A. It has a max DC gate trigger current of 60mA, making it suitable for applications requiring high power control such as industrial machinery and motor drives. The device operates in temperatures ranging from -40°C to 125°C, meeting UL standards for reliability and safety.
TIC116F
TIC116F by Texas Instruments is a single SCR with max. DC gate trigger current of 20mA and non-repetitive peak on-state current of 80A. It has a max. on-state current of 8A, used in applications requiring high power control such as industrial motor drives and lighting systems.
Littelfuse
MCC312-16IO1 by Littelfuse is a Silicon Controlled Rectifier with 2 SERIES CONNECTED elements. It has a Max On-state Current of 320A and Non Repetitive Peak On-state Current of 9800A, making it ideal for high-power applications. With a Max Operating Temperature of 140°C, it is suitable for industrial equipment requiring reliable SCR performance.
2N1595
Comset Semiconductors
SCR; Surface Mount: NO; Minimum Operating Temperature: -65 Cel; Maximum Operating Temperature: 125 Cel; Maximum DC Gate Trigger Current: 10 mA; Non Repetitive Peak On-state Current: 15 A;
2N1843B
2N1843B by Texas Instruments is a Silicon Controlled Rectifier with 75mA DC Gate Trigger Current, 150A Non Repetitive Peak On-state Current, and 13A Max On-state Current. It operates b/w -65°C to 125°C and has a max DC Gate Trigger Voltage of 3.5V. Ideal for applications requiring precise current control in electronic circuits.
CMA30E1600PN
CMA30E1600PN by Littelfuse is a single SCR with 1600V reverse voltage, 23A on-state current, and 28mA gate trigger current. Ideal for applications requiring high power control such as industrial motor drives, power supplies, and lighting systems.
JANTX2N2324
M/a-com Technology Solutions
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Terminal Form: WIRE;
MCMA260P1600YA
MCMA260P1600YA by Littelfuse is a SCR with 2 elements, max. on-state current of 262A, and max. RMS on-state current of 412A. It is used in applications requiring high voltage handling capabilities and operates b/w -40 to 140°C temperatures.
2N1771A
2N1771A by Texas Instruments is a Silicon Controlled Rectifier with 15mA DC Gate Trigger Current, 60A Non Repetitive Peak On-state Current, and 4.7A Max On-state Current. It operates b/w -65 to 155°C and has a max DC Gate Trigger Voltage of 1.5V. Ideal for applications requiring precise current control in various temperature conditions.
S8006LTP
S8006LTP by Littelfuse is a single SCR with 800V repetitive peak reverse voltage and 6A max on-state current. It is used in applications requiring high power control, such as industrial motor drives and power supplies. Operating temperature ranges from -40 to 110°C, making it suitable for various environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5P4SM
Renesas Electronics
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
5P4SMA
5P4SMA-AZ
SCR; Surface Mount: NO; Maximum Time At Peak Reflow Temperature (s): 10; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel; Maximum DC Gate Trigger Voltage: 1.5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved