Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HX5004ENLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for Ethernet applications, it operates b/w -40°C to 85°C and has a compact size of 5.72mm x 16mm x 17.5mm for surface mount installation.
Median Price
$5.360
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$4.450
1k+ parts
$3.870
10k+ parts
$3.300
DigiKey
$4.360
-
Verical
$7.164
$6.994
Nova Conductors
$7.463
Bristol Electronics
$9.600
$6.720
$6.240
Vyrian
TME
$1.680
Manotoh
Electro Sonic
$3.640
$3.170
$2.910
Chip Stock
NexGen Digital
AZTECH Wire
$17.110
Abacus Technologies
Authorized Procurement Solutions
Netroflash
$7.314
$7.090
$6.941
Having multiple functions in one transformer allows for efficient use of space and reduced component count, making this product ideal for compact designs.
High isolation voltage ensures safe operation and reliable communication in datacom applications, making this product suitable for use in sensitive electronic equipment.
The specified inductance value helps in achieving the desired signal integrity and impedance matching in the data communication circuit, contributing to better performance of the product.
TR packing method provides ease of handling and efficient packaging during production, enhancing the overall manufacturing process for this transformer.
Designed specifically for Ethernet applications, this transformer ensures reliable data transmission and compatibility with Ethernet communication standards, making it a suitable choice for networking equipment.
With a high maximum operating temperature, this transformer can withstand elevated temperatures without performance degradation, ensuring long-term reliability in various operating conditions.
The low minimum operating temperature allows this transformer to function effectively in cold environments, expanding its versatility for use in diverse applications.
Compact height dimension facilitates space-saving installation and integration into small electronic devices, making this transformer suitable for miniaturized designs.
Modest width dimension provides a balance between space efficiency and ease of assembly, enabling versatile mounting options for this transformer.
Specifically designed for data communication applications, this transformer offers optimized performance and compatibility in datacom circuits, enhancing the overall functionality of the product.
Surface mount capability simplifies the assembly process and enables secure mounting on PCBs, improving reliability and manufacturability of the electronic device utilizing this transformer.
The specified length dimension provides a well-balanced footprint for this transformer, allowing for flexible placement within the electronic system without sacrificing performance or space efficiency.
Equal turns ratio ensures efficient power transfer and signal integrity, enabling consistent performance and reliable data transmission in the data communication circuit.
Pulse & Datacom Transformers HX5004ENLT attributes and parameters. Explore more Pulse & Datacom Transformers devices from Pulse Electronics
Application:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
HX5004ENLT Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Ink to Laser Marking 03/Jul/2018
PCN Assembly/Origin - Mult Devs Location 12/Apr/2021
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
HX1198NL
Pulse Electronics
HX1198NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L12.7xB7.11xH5.97 mm. Ideal for surface mount applications in data communication systems, it operates b/w -40°C to 85°C temperatures efficiently with a turns ratio of 1:1CT; 1:1CT.
ALT3232M-151-T001
TDK
ALT3232M-151-T001 by TDK is a 150 uH inductance pulse transformer for LAN applications. With dimensions of L3.2xB3.2xH2.8 mm, it operates b/w -40 to 85 °C and has a turns ratio of 1CT:1CT. This surface mount transformer is ideal for 10/1000 BASE-T and 100 BASE-TX networks.
96046122569
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEC; Minimum Operating Temperature: -40 Cel; Turns Ratio (Np:Ns): 1:1; Width: 13.5 mm;
8241
Api Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Turns Ratio (Np:Ns): 1.414:1; 1:1; Length: 25.53 mm; No. of Functions: 1; Isolation Voltage: 1500 V;
1016C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Terminal Finish: Matte Tin (Sn); Height: 15.75 mm; Minimum Operating Temperature: 0 Cel; Length: 15.06 mm;
U6982-CLD
Coilcraft
Coilcraft U6982-CLD is a pulse transformer with 1500V isolation voltage, 59uH inductance, and 22 V-us min ET product. Ideal for gate drive applications, it operates b/w -40 to 85°C temperatures and has a turns ratio of 1CT:2.1CT.
750311591
Wuerth Elektronik & Kg
The Wurth Elektronik 750311591 is a pulse & datacom transformer with an isolation voltage of 1500 V. It has a primary inductance of 8 uH and can handle an output current of 3 A. This surface mount transformer is suitable for applications requiring high voltage isolation and efficient power transfer.
PA2009NLT
PA2009NLT by Pulse Electronics is a 3-function pulse transformer with 1500V isolation voltage and 55.5ns max pulse rise time. Ideal for gate drive applications, it operates b/w -40 to 130°C and has dimensions of L9.02xB8.64xH7.62mm for surface mount assembly in tape & reel packaging.
750311691
Wurth Elektronik 750311691 is a Datacom Transformer with inductance of 60uH, output current of 0.001A, and max DC unbalance current of 250mA. It operates b/w -40 to 125°C, has dimensions L8.26xB6.6xH5.59mm, and is suitable for applications requiring a turns ratio of 5:1 at frequencies up to 200KHz.
HX5084NL
Pulse Electronics' HX5084NL is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems due to its compact L15.24xB7.62xH4.14 (mm) dimensions and -40 to 85°C operating temperature range.
ALT4532P-181-T05G
ALT4532P-181-T05G by TDK is a DATACOM TRANSFORMER with inductance of 180uH, suitable for 1000 BASE-T and 2.5/5G BASE-T LAN applications. It operates b/w -40°C to 105°C, with dimensions of 4.5mm x 3.2mm x 2.9mm for surface mount installation.
750813134
Wurth Elektronik 750813134 is a DATACOM TRANSFORMER with 4500V isolation voltage, 600uH inductance, and 8:1 turns ratio. Ideal for pulse & datacom applications due to its compact L16.5xB18.0xH18.0 (mm) size and through-hole mounting feature. Operating range from -40°C to 125°C makes it versatile for various environments.
M21038/27-07
Pico Electronics
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 130 Cel; Width: 8.89 mm;
HX5020NLT
HX5020NLT by Pulse Electronics is a 4-function datacom transformer with 1500V isolation voltage and 1.2dB insertion loss. Ideal for 1000 BASE-T applications, it operates b/w -40°C to 85°C temperatures and has a turns ratio of 1:1.
H2019FNL
H2019FNL by Pulse Electronics is a Datacom Transformer with 2 functions and an isolation voltage of 1500V. It features inductance of 350uH, operates b/w 0-70°C, and has a compact size of 5.99x9.09x12.7mm. Ideal for surface mount applications in data communication systems due to its 1:1 turns ratio and high isolation capability.
HCTSM80101AALE
Bourns
The Bourns HCTSM80101AALE is a pulse transformer with 5000V isolation voltage, 250uH inductance, and 1:1 turns ratio. It is AEC-Q200 approved and suitable for datacom applications. With a compact size of 6.5mm x 10.8mm x 12.3mm, it operates b/w -40°C to 125°C temperature range.
HM2103NL
HM2103NL by Pulse Electronics is a DATACOM TRANSFORMER with 150uH inductance, 4300V isolation voltage, and AEC-Q200 approvals. It operates b/w -40 to 125°C and has a nominal input voltage of 1000V. Ideal for surface mount applications in pulse & datacom systems.
HDX8008NL
HDX8008NL by Pulse Electronics is a Datacom Transformer with 4 functions and an isolation voltage of 1500V. It has primary inductance of 120uH, operates b/w -40 to 85°C, and features a turns ratio of 1:1. Ideal for surface mount applications in data communication systems due to its compact size and high isolation capabilities.
HM0068ANLT
HM0068ANLT by Pulse Electronics is a Datacom Transformer with 2 functions and 1500V isolation voltage. It features primary inductance of 350uH, operates b/w -40 to 105°C, and has dimensions of L12.7xB8.81xH2.08 mm. Ideal for surface mount applications in data communication systems due to its compact size and high isolation capabilities.
P0585NL
Pulse Electronics P0585NL is a Pulse Transformer with 3000V isolation voltage, 450uH inductance, and 92 V-us min ET product. Ideal for GATE DRIVE applications, it operates b/w -40 to 125 °C with dimensions of L20.57xB12.19xH19.05 mm and PCB MOUNT feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HX5008NL
HX5008NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, this transformer operates b/w -40°C to 85°C with a frequency range from 1MHz to 100MHz.
HX5008NLT
HX5008NLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and operates at frequencies up to 100000 KHz. Ideal for applications like 1000 BASE-T, this transformer is designed for surface mount with dimensions of L15.24xB13.64xH5.47 (mm).
HX5004NLT
HX5004NLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH primary inductance. It is designed for applications like 1000 BASE-T networks, operates b/w -40°C to 85°C, and has dimensions of L17.53xB12.2xH5.26 mm for surface mount assembly.
HX5008FNL
HX5008FNL by Pulse Electronics is a UL-approved datacom transformer with 4 functions and 1500V isolation voltage. It features an insertion loss of 3dB, inductance of 325uH, and operates b/w -40 to 85°C. This surface-mount transformer has dimensions of L17.86xB13.16xH6.12mm, making it ideal for various data communication applications.
HX5020NL
HX5020NL by Pulse Electronics is a 4-function datacom transformer with an isolation voltage of 1500V and insertion loss of 1.2dB. It is designed for applications like 1000BASE-T, operates b/w -40°C to 85°C, and has dimensions of L27.94xB7.54xH8.33mm for surface mount installation.
HX5004NL
HX5004NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, it operates b/w -40°C to 85°C with a frequency range from 1MHz to 100MHz.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: HX5020NL; Approvals (V): UL; Isolation Voltage: 1500 V; No. of Functions: 4;
HX5084NLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 4.14 mm; Length: 15.24 mm; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH;
HX5084FNLT
HX5084FNLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. It is designed for surface mount applications in data communication systems, offering a compact size of L15.24xB6.41xH4.14 (mm) and operating temperatures ranging from -40 to 85°C.
HX5008FNLT
HX5008FNLT by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. It has an insertion loss of 3dB, inductance of 325uH, and operates b/w -40°C to 85°C. This transformer is UL approved and designed for surface mount applications in pulse and data communication systems.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: GENERAL PURPOSE; Isolation Voltage: 1500 V; Width: 7.62 mm; No. of Functions: 1;
HX5014FNLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Maximum Operating Temperature: 85 Cel; Application: GENERAL PURPOSE; Isolation Voltage: 1500 V;
HX5004EFNL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: GENERAL PURPOSE; Height: 5.72 mm; Maximum Operating Temperature: 85 Cel; Inductance (Primary): 350 uH;
HX5004ENL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Turns Ratio (Np:Ns): 1:1; Width: 12.2 mm; Inductance (Primary): 350 uH;
HX5062FNL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Width: 15.24 mm; Length: 17.5 mm; Height: 5.72 mm;
HX5008T
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: 1000 BASE-T; Dimensions: L13.64XB15.24XH5.72 (mm); Length: 13.64 mm; Isolation Voltage: 1500 V;
HX5008
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: L13.64XB15.24XH5.72 (mm); Maximum Operating Frequency: 100000 KHz; Width: 15.24 mm; Packing Method: TUBE;
HX5004EFNLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Inductance (Primary): 350 uH; Maximum Operating Temperature: 85 Cel; Height: 5.72 mm;
HX5009FNL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: GENERAL PURPOSE; Maximum Operating Temperature: 85 Cel; Width: 13.67 mm; Isolation Voltage: 1500 V;
HX5020HLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN OVER NICKEL; Length: 27.94 mm; Packing Method: TR, PLASTIC, 13 INCH; Turns Ratio (Np:Ns): 1:1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved