Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATA LINE FILTER; Maximum DC Resistance: 1 ohm; Packing Method: TR, 13 INCH; Output Impedance (ohm): 3500 OHM; Height: 2.6 mm; Additional Features: IMPEDANCE AT 10 MHZ;
Median Price
$1.260
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.855
1k+ parts
$0.721
10k+ parts
$0.593
Mouser Electronics
$0.673
ComSIT Distribution GmbH
-
Data Line Filters AWCU00453226510XG0 attributes and parameters. Explore more Data Line Filters devices from Pulse Electronics
Additional Features:
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
Minimum Insulation Resistance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Rated Voltage:
Screening Level:
Width (mm):
AWCU00453226510XG0 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
LM358N
Intersil
BSS123NH6327XTSA1
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NFE61HT332Z2A9L
Murata Manufacturing
Murata Manufacturing's NFE61HT332Z2A9L is a DATA LINE FILTER with 100V rated voltage, 3300uF capacitance, and 2A rated current. It is used in automotive applications due to AEC-Q200 screening level and operates b/w -55°C to 125°C temperature range.
NFE61PT472C1H9L
Murata Manufacturing's NFE61PT472C1H9L is a 3-terminal data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 4700uF capacitance. It operates b/w -25°C to 85°C and is ideal for surface mount applications requiring noise filtering in data lines.
7427927311
Wuerth Elektronik & Kg
Wurth Elektronik 7427927311 is a FERRITE CHIP Data Line Filter with AEC-Q200 screening. It has 2 terminals, operates b/w -55 to 125 °C, and offers 0.09 ohm DC resistance. Ideal for surface mount applications, it measures L1.0xB0.5xH0.5 mm and handles a rated current of 1.2A while providing an output impedance of 120 OHM.
7351
Jw Miller Magnetics
DATA LINE FILTER;
744823220
Wurth Elektronik 744823220 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 20000uH. It operates b/w -40 to 125 °C and has dimensions of L23.0xB13.0xH28.0 mm. Ideal for applications requiring noise suppression in data lines at a max current of 1.5A.
BLM31AJ260SN1L
Murata Manufacturing's BLM31AJ260SN1L is a FERRITE CHIP filter with 2 terminals, rated at 0.5A. With dimensions of L3.2xB1.6xH1.1mm, it offers an output impedance of 26Ω and max DC resistance of 0.05Ω. Ideal for data line filtering applications due to its surface mounting type and operating temperatures ranging from -55°C to 125°C.
BLM18PG300SN1D
BLM18PG300SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1A, and output impedance of 30 ohm. It operates b/w -55 to 125 °C and has dimensions of L1.6xB0.8xH0.8 mm. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BK1608HS601-T
Taiyo Yuden
BK1608HS601-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max frequency of 100 MHz, DC resistance of 0.45 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
BLM21AH102SN1D
Murata Manufacturing's BLM21AH102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 85°C, offering a DC resistance of 0.45 ohm and output impedance of 1000 ohm at 100 MHz. Ideal for data line filtering applications due to its compact size and high impedance characteristics.
744273222
Wurth Elektronik 744273222 is a Data Line Filter with 2 functions, rated at 80V. It has an inductance of 30uH and operates b/w -40 to 125°C. Ideal for applications requiring noise suppression in data lines with UL and IEC approvals.
BNX023-01L
Murata Manufacturing's BNX023-01L is a data line filter with 2 functions and 4 terminals. It offers 35 dB attenuation at 1000 MHz, rated for 100 V and 20 A. Ideal for applications requiring noise suppression in data lines, it operates b/w -40 to 125 °C.
MPZ2012S102ATD25
TDK
TDK's MPZ2012S102ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 1000 ohm output impedance. Operating b/w -55°C to 125°C, it is ideal for data line filtering in surface mount applications.
BKP2125HS221-T
BKP2125HS221-T by Taiyo Yuden is a 0805 multilayer chip data line filter with 2 terminals. It operates b/w -55 to 85 °C, has a DC resistance of 0.05 ohm, and an output impedance of 220 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
BLM31SN500SN1L
Murata Manufacturing's BLM31SN500SN1L is a FERRITE CHIP filter with 2 terminals, rated for 10A current. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55 to 125 °C and has a max DC resistance of 0.0021 ohm. Ideal for data line filtering applications due to its 50 OHM output impedance and surface mounting type.
W2H15C1038AT1A
KYOCERA AVX
KYOCERA AVX's W2H15C1038AT1A is a 50V data line filter with 4 terminals. Featuring feed through capacitor technology, it has dimensions of L2.01xB1.25xH1.14 mm and is surface mountable. Ideal for applications requiring noise suppression in electronic circuits.
ILHB0805ER251V
Vishay Intertechnology
Vishay Intertechnology's ILHB0805ER251V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.04 ohm, and output impedance of 250 OHM. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
IP4256CZ5-W,115
Nexperia
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Rated Voltage: 5.6 V; Length: 1.7 mm; No. of Functions: 1; Approvals (V): IEC;
NFM21PC104R1E3D
Murata Manufacturing's NFM21PC104R1E3D is a data line filter with 1000 Mohm insulation resistance, 25V rated voltage, and 100000 uF capacitance. It is a feed through capacitor used in applications requiring noise filtering and signal conditioning.
MPZ2012S221ATD25
TDK's MPZ2012S221ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2.0xB1.25xH0.85 (mm), it has an output impedance of 220 ohm and max operating temp of 125°C. Ideal for data line filtering applications due to its compact size and surface mounting type.
B82789C0513H002
TDK B82789C0513H002 is an 80V data line filter with 51uH inductance and 0.55 ohm max DC resistance. It has 2 functions, 4 terminals, and operates b/w -55 to 150°C. Ideal for applications requiring a compact surface mount filter with a rated current of 0.25A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Pulse Electronics
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved