Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PE42553A-Z by Psemi is a RF/Microwave switch with 1.05 dB max insertion loss, 37 dBm CW power handling, and operates from 0.009 to 8000 MHz. It's a diversity switch with 50 ohm impedance, Ni/Pd/Au finish, and can withstand -40 to 85 °C. Ideal for applications requiring high-frequency signal routing in diverse environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Nova Conductors
Resion
Corohmni
$0.996
Aztec Data Supply Inc.
$2.530
AZTECH Wire
$14.549
Semicontronic
$36.000
$35.100
$34.920
Argo Parts USA
Continental Prestige Electronics
Perfect Parts
Bastille Electronics
High maximum input power allows for handling of strong signals without risk of damage or signal degradation.
Component construction ensures the product is durable and reliable for long-term use.
Wide operating temperature range allows for use in various environments without compromising performance.
Ability to operate in low temperature conditions ensures product reliability in different climates.
Nickel/Palladium/Gold terminal finish provides excellent conductivity and corrosion resistance for long-lasting performance.
Low insertion loss ensures minimal signal attenuation, maintaining signal integrity and quality.
Diversity switch design allows for seamless switching between different RF or microwave signals, providing versatility in signal routing.
50 ohm characteristic impedance ensures compatibility with standard RF equipment, reducing signal reflection and loss.
Low minimum operating frequency allows for handling of a wide range of signal frequencies.
High maximum operating frequency enables support for a wide range of RF and microwave applications.
RF/Microwave Switches PE42553A-Z attributes and parameters. Explore more RF/Microwave Switches devices from Psemi
Additional Features:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
PE42553A-Z RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
At pSemi, we design and manufacture innovative semiconductor solutions. We take what “can’t be done” and transform it into an industry first. Whether it is a cutting-edge design technique, a transformative architecture or a novel technology platform, our team explores new ways to make electronics smaller, thinner, faster and more efficient. Our RF, power management and sensor products are designed into devices that are used by millions of people worldwide. You’ll find our integrated circuits in your smartphone, your cable modem, your laptop and your neighborhood’s new 5G base station. Headquartered in San Diego, we have offices on three continents and a worldwide sales team to support our customers. Our offices are located in major global tech hubs to support our growing team of talented electrical engineers. We build intelligent electronics for the connected world.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
Silicon Standard
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
Littelfuse
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Panjit International
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
S126
L-3 Narda-miteq
SPDT;
TG2203F
Toshiba
TG2216TU
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 2.7;
TGS8630-XCC
TGS8630-XCC by Texas Instruments is an RF/Microwave SPDT switch with a max input power of 30 dBm and VSWR of 1.25. Operating from 0-12000 MHz, it's ideal for applications requiring high-frequency signal routing in components like amplifiers or transceivers.
F2915NBGK8
Renesas Electronics
SP5T; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
HMC182S14
Analog Devices
HMC182S14 by Analog Devices is a RF/Microwave Switch with 30 dBm CW input power, 22 dBm compression point, and 1.2 dB max insertion loss. It is a GaAs technology diversity switch with 50 ohm impedance, suitable for applications requiring high-frequency signal routing in wireless communication systems.
CSH210P
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 0 MHz;
ADG901SCPZ-EP
ADG901SCPZ-EP by Analog Devices is an RF/Microwave Switch with 18 dBm CW input power, 1.25 dB max insertion loss, and 31 dB min isolation. It operates from -55 to 125°C and is ideal for applications requiring fast switching in CMOS technology for frequencies up to 1000 MHz.
NSG1001MXT1G
Onsemi
NSG1001MXT1G by Onsemi is a RF/Microwave Switch with 6 terminals, operating from -40 to 105 °C. It offers high isolation of 20 dB, low insertion loss of 0.95 dB, and can handle frequencies from 2500 to 8000 MHz. Ideal for diversity switch applications due to its surface mount construction and compression point of 27 dBm.
MASWSS0178TR-3000
Tyco Electronics M/a-com
DIVERSITY SWITCH; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 33.01 dBm; Characteristic Impedance: 50 ohm; Maximum Insertion Loss: .8 dB; Construction: COMPONENT;
ADG918BRM
ADG918BRM by Analog Devices is a CMOS RF/Microwave switch with 8 terminals. It operates from 0 to 4000 MHz, handling up to 17.99 dBm CW power and has a compression point of 20 dBm. Ideal for diversity switching applications due to its low insertion loss of 1.25 dB and fast 0.005 us on time.
ADG919BRMZ-REEL7
ADG919BRMZ-REEL7 by Analog Devices is a CMOS RF/Microwave Diversity Switch with 8 terminals. It operates from -40 to 85 °C, with max freq of 4 GHz and min isolation of 34 dB. Ideal for applications requiring high power handling up to 17.99 dBm CW.
HMC641
Analog Devices' HMC641 is a GAAS SP4T RF switch with 3.1 dB max insertion loss, 37 dB min isolation, and 24 dBm compression point. Ideal for applications requiring high-frequency switching up to 18 GHz in RF/microwave systems.
UPG2179TB
SPDT; Construction: COMPONENT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Input Power (CW): 33.01 dBm; Maximum Insertion Loss: .55 dB; Maximum Operating Frequency: 2500 MHz;
TGS8250-SCC
TGS8250-SCC by Texas Instruments is a GAAS SPDT RF switch with 30 dBm CW power handling, VSWR of 1.5, and frequency range up to 18 GHz. Ideal for reflective port termination applications in RF/Microwave systems, operating b/w 0°C to 70°C.
ADRF5132BCPZN-R7
Analog Devices' ADRF5132BCPZN-R7 is a RF/Microwave Switch with 16 terminals, operating from 700 MHz to 5000 MHz. It has a max input power of 43 dBm and operates at temperatures ranging from -40°C to 105°C. Ideal for diversity switch applications due to its reflective port termination and surface mount feature.
HMC233G8
Analog Devices' HMC233G8 is a SPDT RF switch with 50 ohm impedance, offering 2.2 dB max insertion loss and handling up to 30 dBm CW power. With a frequency range of 0-6000 MHz, it's ideal for RF/microwave applications requiring high-performance switching capabilities in temperatures ranging from -40°C to 85°C.
HMC182S14RTR
HMC182S14RTR by Analog Devices is a RF/Microwave Switch with 30 dBm CW input power, 22 dBm compression point, and 1.5 dB max insertion loss. It is a GaAs technology diversity switch with 50 ohm impedance, suitable for applications requiring high isolation and fast switching in the frequency range of 0-2000 MHz.
HMC253AQS24
Analog Devices' HMC253AQS24 is a RF/Microwave Switch with 20 dBm CW input power, 23 dBm compression point, and 2.1 dB max insertion loss. Ideal for diversity switch applications, it operates from -40 to 85 °C with a GAAS technology and offers 28 dB min isolation at frequencies up to 2500 MHz.
CG2214M6-C2
California Eastern Laboratories
CG2214M6-C2 by California Eastern Laboratories is a RF/Microwave switch with max input power of 33.01 dBm and insertion loss of 0.55 dB. It operates b/w 50-3000 MHz, ideal for diversity switching applications in temperatures ranging from -45 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PE4259SCBC-Z
Psemi
PE4259SCBC-Z by Psemi is an RF/Microwave SPDT switch with max input power of 34 dBm and insertion loss of 0.6 dB. It operates from 10 MHz to 3000 MHz, suitable for applications requiring high-frequency switching in temperatures ranging from -40°C to 85°C.
PE4259SCBD-Z
PE4259SCBD-Z by Psemi is a SPDT RF switch with 1.09 VSWR, 34 dBm CW power handling, and 0.6 dB max insertion loss. Ideal for applications requiring high isolation (19 dB), low supply current (0.02 mA), and fast switching time (1.5 us). Suitable for RF/microwave systems operating b/w 10 MHz to 3 GHz.
PE42421SCAA-Z
SPDT; Maximum Insertion Loss: .6 dB; JESD-609 Code: e4; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 3000 MHz;
PE42442A-Z
PE42442A-Z by Psemi is a RF/Microwave switch with 1 function. It has a max input power of 34 dBm and compression point of 35 dBm. This component, using UltraCMOS technology, is suitable for applications requiring SP4T switches in the frequency range of 30 MHz to 6000 MHz.
PE42540F-Z
SP4T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Terminal Finish: NICKEL PALLADIUM GOLD;
PE42359SCAA-Z
PE42359SCAA-Z by Psemi is an RF/Microwave Switch with SPDT type, 50 ohm impedance, and 1.3 dB max insertion loss. It operates b/w -40 to 105 °C temperature range and supports frequencies from 10 MHz to 3000 MHz. Ideal for applications requiring high-frequency signal routing in various electronic systems.
PE42440MLBB-Z
PE42440MLBB-Z by Psemi is a SP4T RF/Microwave switch with 1.15 dB max insertion loss, 32.99 dBm CW power handling, and 50-3000 MHz frequency range. Ideal for applications requiring high-frequency signal routing in environments ranging from -40 to 85°C.
PE42540LGBD-Z
PE42540LGBD-Z by Psemi is a SP4T RF switch with 1.6 dB max insertion loss, 30 dBm CW power handling, and VSWR of 1.1. Ideal for applications requiring high-frequency switching in RF/microwave systems with operating frequency range from 0.00001 MHz to 8000 MHz.
PE423641MLAA-Z
SP4T; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4;
PE42422MLAA-Z
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal On Time: 2 us;
PE42641MLBD-Z
DIVERSITY SWITCH; Construction: COMPONENT; Minimum Operating Frequency: 100 MHz; Terminal Finish: NICKEL PALLADIUM GOLD; Characteristic Impedance: 50 ohm; Maximum Insertion Loss: .75 dB;
PE42721MLBA-Z
DIVERSITY SWITCH;
PE42553B-Z
SPDT; Minimum Operating Temperature: -40 Cel; Maximum Insertion Loss: 1.05 dB; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm;
PE42482A-X
PE42482A-X by Psemi is an RF/Microwave Switch with 33 dBm CW power, 1.12 VSWR, and 2.8 dB insertion loss. It's a SP8T device with CMOS technology, operating from 10 MHz to 8000 MHz. Ideal for applications requiring high-frequency switching in compact designs.
PE42420F-Z
PE42420F-Z by Psemi is a RF/Microwave switch with 1 function. It has a max input power of 25 dBm and a max voltage standing wave ratio of 1.22. This component, made of plastic/epoxy, is commonly used in applications requiring SPDT switches with a frequency range from 20 MHz to 6000 MHz.
PE42582A-X
SP8T; Additional Features: HIGH LINEARITY AND ISOLATION; Construction: COMPONENT; Maximum Input Power (CW): 33.01 dBm; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 105 Cel;
PE42540G-Z
SP4T;
PE42540LGBC-Z
SP4T; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 8000 MHz; Maximum Insertion Loss: 1.6 dB; Minimum Operating Frequency: .00001 MHz;
PE42462A-X
PE42462A-X by Psemi is a RF/Microwave switch with max input power of 33.01 dBm and insertion loss of 2.8 dB. It operates b/w -40 to 105°C, suitable for diversity switch applications in the frequency range of 10 MHz to 8 GHz.
PE42521MLBA-Z
DIVERSITY SWITCH; JESD-609 Code: e4; Maximum Input Power (CW): 36 dBm; Maximum Insertion Loss: 2.6 dB; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: .009 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved