Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUS CONTROLLER, PCI; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 160; Package Code: QFP; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
1k+ parts
10k+ parts
Lantek
North Shore Components
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
DF Sales Co.
Speed Components Ltd
Component Stockers USA
$5.480
$5.210
$5.050
Corohmni
$72.347
Netroflash
Authorized Procurement Solutions
RC Electronics
Kepictronics
GreenTree Electronics
FE SAS
Perfect Parts
Bus Controllers PCI9050-1 attributes and parameters. Explore more Bus Controllers devices from Plx Technology
Address Bus Width:
Bus Compatibility:
Maximum Clock Frequency:
Maximum Data Transfer Rate:
External Data Bus Width:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
PCI9050-1 Peripheral ICs trade compliance attributes, and parameters.
ECCN
3A991.A.2
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
SUNNYVALE, Calif. and SINGAPORE, June 23, 2014 (GLOBE NEWSWIRE) -- Avago Technologies Limited (Nasdaq:AVGO,) and PLX Technology, Inc. (Nasdaq:PLXT) today announced that they have entered into a definitive agreement under which Avago will acquire PLX, a leader in PCI Express silicon and software connectivity solutions, in an all-cash transaction valued at approximately $309 million, or $293 million net of cash and debt acquired. Under the terms of the agreement, which was approved by the Boards of Directors of both companies, a subsidiary of Avago will commence a tender offer for all of the outstanding shares of PLX common stock for $6.50 per share in cash. Avago expects to fund the transaction with cash available on its balance sheet. SINGAPORE and IRVINE, Calif., May 28, 2015 (GLOBE NEWSWIRE) -- Avago Technologies Limited (Nasdaq:AVGO) and Broadcom Corporation (Nasdaq:BRCM) today announced that they have entered into a definitive agreement under which Avago will acquire Broadcom in a cash and stock transaction that values the combined company at $77 billion in enterprise value. Upon completion of the acquisition, the combined company will have the most diversified communications platform in the semiconductor industry, with combined annual revenues of approximately $15 billion.
4554
Jw Miller Magnetics
Other Semiconductors;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Comchip Technology
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
M39029/56351
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
Gulf Semiconductor
Won-top Electronics
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PCI9052G
Plx Technology
USB4604I-1070HN
Microchip USB4604I-1070HN is a 48-terminal bus controller with 1.6-2V supply voltage range, supporting I2C, SMBUS, SPI, UART & USB. It operates b/w -40 to 85°C with a clock frequency of up to 24MHz and data transfer rate of 60MBps. Ideal for industrial applications requiring high-speed communication in compact designs.
TUSB2046BIRHBTG4
Texas Instruments
TUSB2046BIRHBTG4 by Texas Instruments is a USB bus controller with 32 terminals, operating at 3.3V and supporting data transfer rates up to 12 MBps. It has a max clock frequency of 6 MHz and is ideal for industrial applications requiring USB compatibility in a compact chip carrier package.
USB2502-HT
USB2502-HT by Microchip Technology is a 48-terminal BUS CONTROLLER with CMOS technology. It operates at 24 MHz clock frequency, suitable for UNIVERSAL SERIAL BUS applications. The device has a low profile flatpack package style and can function in temperatures ranging from 0 to 70 °C.
FT2232HQ-REEL
FTDI's FT2232HQ-REEL is a bus controller with 16-bit address bus, 8-bit external data bus, and max clock frequency of 12 MHz. Ideal for industrial applications like interfacing with 8048 and 8051 microcontrollers. Supports supply voltages of 1.8V and 3.3V in a compact chip carrier package style.
TUSB3200ACPAH
TUSB3200ACPAH by Texas Instruments is a BUS CONTROLLER IC with 52 terminals, operating at 3.3V. It has a thin profile flatpack package and can withstand temperatures from 0 to 70°C. Ideal for USB applications due to its CMOS technology and nickel palladium gold terminal finish.
NET2272REV1A-LF
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;
PI7C9X111SLBFDEX
Diodes Incorporated
PI7C9X111SLBFDEX by Diodes Inc. is a bus controller IC with 128 terminals, operating at -40 to 85°C. It supports data rates up to 312.5 MBps and has a supply voltage range of 0.9V to 1.1V. Ideal for industrial applications requiring I2C, ISA, USB, or VGA bus compatibility in a compact square package measuring 14mm x 14mm with a seated height of 1.6mm.
TUSB8044ARGCR
TUSB8044ARGCR by Texas Instruments is a 64-terminal bus controller with a max data transfer rate of 625 MBps. It operates b/w 0 to 70°C and has a supply voltage range of 0.99V to 1.26V. Ideal for USB applications, it features CMOS technology and supports I2C bus compatibility.
USB2640I-HZH-02
USB2640I-HZH-02 by Microchip Technology is a bus controller with a max data transfer rate of 35 MBps. It is compatible with I2C, SMBUS, SPI, and USB buses. This chip has a package style of CHIP CARRIER and operates at an industrial temperature grade of -40 to 85 °C.
LAN7800/VSX
LAN7800/VSX by Microchip Technology is a USB bus controller with 625 MBps data transfer rate, operating at 25 MHz clock frequency. It has a supply voltage range of 1.1V to 1.26V and operates in commercial temperature grade. Ideal for IEEE 802.3 and IEEE 802.1 drive interfaces, it comes in a square chip carrier package with 48 terminals and matte tin finish, suitable for surface mount applications.
USB3343-CP
Microchip Technology's USB3343-CP is a CMOS BUS CONTROLLER with 24 terminals in a SQUARE CHIP CARRIER package. It operates at 1.6-2V, supports USB and VBUS, and has an 8-bit external data bus width. Ideal for applications requiring a max clock frequency of 60MHz and operating temperatures b/w -40 to 85°C.
PDIUSBD12PW
Philips Semiconductors
Bus Controllers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: TSSOP; Package Shape: RECTANGULAR;
TUSB8041RGCT
TUSB8041RGCT by Texas Instruments is a 64-terminal bus controller IC with CMOS technology. It operates at 24 MHz clock frequency, suitable for I2C and SMBUS buses. This chip carrier package with a very thin profile is ideal for commercial applications requiring USB peripheral control.
CY7C63413C-PVXCT
CY7C63413C-PVXCT by Infineon is an 8-bit bus controller with a max clock frequency of 6 MHz. It features USB compatibility, 256 bytes of RAM, and operates b/w temperatures of 0 to 70°C. Ideal for applications requiring high-speed data transfer over USB connections.
USB3347-CP-TR
Microchip Technology's USB3347-CP-TR is a CMOS BUS CONTROLLER with 24 terminals, operating at 1.6-2V. It supports USB and VBUS compatibility, with an 8-bit data bus width and 60MHz clock frequency. Ideal for applications requiring a compact, low-power solution in automotive or industrial environments.
USB7002-I/KDXVAO
USB7002-I/KDXVAO by Microchip Technology is a bus controller with a max data transfer rate of 625 MBps. It is compatible with I2C, I2S, SMBUS, SPI, UART, and USB buses. This chip is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and small form factor (12mm x 12mm).
CYUSB3314-88LTXC
Cypress Semiconductor
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 88; Package Code: HVQCCN; Package Shape: SQUARE;
USB2422/MJ
USB2422/MJ by Microchip Technology is a BUS CONTROLLER IC with 24 terminals, operating at 3-3.6V. It supports SMBUS and USB buses, with a max supply current of 89mA. Ideal for applications requiring universal serial bus connectivity in commercial temperature environments up to 70°C.
TUSB8040ARKMR
TUSB8040ARKMR by Texas Instruments is a BUS CONTROLLER IC with 100 terminals, operating at 24 MHz clock frequency. It supports I2C and SMBUS protocols, ideal for USB applications in commercial-grade devices. The chip carrier package has a square shape, measures 9mm x 9mm, and can operate b/w 0-70°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PCI9056-BA66BIG
BUS CONTROLLER, PCI; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 256; Package Code: BGA; Package Shape: SQUARE;
Broadcom
The Broadcom PCI9056-BA66BIG is a bus controller with a 32-bit address bus width and max data transfer rate of 264 MBps. It is commonly used in industrial applications with I960, MPC850, MPC860, POWERPC 801, and POWERPC 401 bus compatibility.
PCI9030-AA60PIF
Broadcom's PCI9030-AA60PIF is a 32-bit bus controller with a max clock frequency of 60 MHz. It operates at 3.3V and supports PCI bus compatibility, offering a data transfer rate of up to 240 MBps. This chip, housed in a square flatpack package, is ideal for applications requiring high-speed data processing on PCI buses.
BUS CONTROLLER, PCI; Terminal Form: GULL WING; No. of Terminals: 176; Package Code: QFP; Package Shape: SQUARE; Maximum Clock Frequency: 60 MHz;
PCI9054-AC50PIF
BUS CONTROLLER, PCI; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 176; Package Code: FQFP; Package Shape: SQUARE;
Broadcom's PCI9054-AC50PIF is a bus controller with 32-bit address and external data bus width. Operating at 50 MHz, it supports a max data transfer rate of 132 MBps. Ideal for industrial applications, this CMOS technology-based device has a terminal pitch of 0.5 mm and is compatible with I960, MPC850, MPC860, and PPC401 buses.
Broadcom's PCI9052G is a bus controller with 32-bit address and external data bus width. It operates at 40 MHz clock frequency, achieving a data transfer rate of 132 MBps. Ideal for industrial applications requiring ISA bus compatibility and operating in temperatures ranging from -40 to 85 °C.
PCI9656-BA66BIG
Broadcom's PCI9656-BA66BIG is a 64-bit bus controller with max data transfer rate of 528 MBps and operates at 66 MHz. It is used in industrial applications with I960, MPC850, MPC860, POWERPC 80X/82X, POWERPC 401 compatibility. The package style is grid array with terminal pitch of 1.27 mm and temperature grade of INDUSTRIAL.
BUS CONTROLLER, PCI; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 272; Package Code: BGA; Package Shape: SQUARE;
PCI9030-AA60BIF
BUS CONTROLLER, PCI; Terminal Form: BALL; No. of Terminals: 180; Package Code: BGA; Package Shape: SQUARE; Package Style (Meter): GRID ARRAY;
Broadcom's PCI9030-AA60BIF is a 32-bit bus controller with a max clock frequency of 60 MHz. It operates at 3.3V and supports PCI bus compatibility, offering a data transfer rate of up to 240 MBps. This square-shaped chip in grid array package is ideal for high-speed data processing applications.
PCI9030-AA60PI
BUS CONTROLLER, PCI; Terminal Form: GULL WING; No. of Terminals: 176; Package Code: QFP; Package Shape: SQUARE; Terminal Position: QUAD;
PCI9056-BA66BI
PCI9052
PCI9080-3
BUS CONTROLLER, PCI; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
BUS CONTROLLER, PCI; Terminal Form: GULL WING; No. of Terminals: 208; Package Code: QFP; Package Shape: RECTANGULAR; JESD-30 Code: R-PQFP-G208;
PCI9050-1F
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved