Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Panduit FSD74-6-D ferrule with CSA approval, made of polypropylene, DIN conformity. Supports max wire size 24 AWG and cable entry up to 0.07". Ideal for electrical assembly applications requiring secure wire termination.
Median Price
$0.305
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Farnell
1+ parts
$0.226
100+ parts
$0.207
1k+ parts
$0.191
10k+ parts
-
Interstate Connecting
$0.297
$0.259
$0.233
RS Americas
$0.276
$0.243
$0.232
DigiKey
$0.320
$0.277
$0.257
$0.250
Mouser Electronics
$0.251
Heilind Electronics
$0.321
$0.268
RS (Exports)
$0.330
$0.235
Newark
$0.376
$0.344
$0.318
Element14
$50.840
$24.330
$22.010
Master Electronics
$0.214
Verical
$0.294
$0.252
TTI
NEP Electronics
$0.210
Arrow
$0.246
$0.229
Chip1Stop
Nova Conductors
$0.242
IBS Electronics
$0.351
$0.300
Vyrian
Electro Sonic
$0.204
Quotebeam
Ampacity Inc.
$0.178
Continental Prestige Electronics
$0.237
Argo Parts USA
Netroflash
$0.230
$0.225
Corohmni
$3.284
Aztec Data Supply Inc.
$5.470
CSA approval ensures this product meets safety and quality standards set by a reputable organization.
Polypropylene is a durable and reliable insulating material that protects wires and cables from damage.
Conforming to DIN standards ensures compatibility and interchangeability with other components and equipment.
Ferrules provide a secure connection for wires, improving conductivity and reducing the risk of short circuits.
Capable of handling wires up to 24 AWG, this product is suitable for various applications requiring different wire sizes.
With a maximum cable entry of 0.07 inch, this product can accommodate a range of cable sizes for versatility in installations.
Assembly Products FSD74-6-D attributes and parameters. Explore more Assembly Products devices from Panduit
Approvals (V):
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
Insulator Material:
MIL Conformity:
Maximum Wire Size:
FSD74-6-D Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Although the world has dramatically changed since our story began in 1955 when our founder Jack E. Caveney invented the Panduct wiring duct in his garage, our spirit of discovery and can-do attitude have remained. Choosing to innovate rather than imitate, we continue to create leading-edge physical electrical and network infrastructure solutions across a wide spectrum of business environments. As a customer-focused company, we pride ourselves on creating a continuous flow of new products, software, and solutions designed to help you achieve your business goals. By partnering with Panduit, you can develop your connectivity strategy on a foundation that ensures scalability, accuracy, security, and reliability, so you can build for long-term growth.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Vishay Telefunken
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
General Semiconductor
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1060-16-0622
TE Connectivity 1060-16-0622 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 AWG to 16 AWG, rated for 13A current. Ideal for applications requiring male gendered contacts and straight mounting style.
1SNK908302R0000
TE Connectivity's 1SNK908302R0000, made of POLYAMIDE, operates b/w -55 to 110 °C with a max AC/DC voltage of 600 V. It supports up to 0 AWG wire size and handles a rated current of 57 A. Ideal for various assembly applications requiring high voltage and current capabilities.
1761008-3
TE Connectivity's 1761008-3 features COMPLIANT FIT terminals, operating from -55 to 85°C. With a SIGNAL design and max wire size of 0 AWG, it is ideal for CAGE ASSEMBLY applications in various industries.
SVH-41T-P1.1
J S T Mfg
SVH-41T-P1.1 by J S T Mfg is a CRIMP terminal with approvals from CSA, TUV, and UL. It supports wire sizes from 20 AWG to 16 AWG, rated for 10 A current at 250 V AC/DC. Ideal for applications requiring FEMALE contacts with SQUARE PIN-SOCKET style in straight mounting configuration.
1SNK900101R0000
Abb
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel;
12048074
Aptiv
CONNECTOR ACCESSORY; Contact Gender: FEMALE; MIL Conformity: NO; Mounting Style: STRAIGHT; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO;
SXA-001T-P0.6
SXA-001T-P0.6 by J S T Mfg is a UL approved XA connector with crimp terminals for 28-22 AWG wires, rated at 3A and 250V AC/DC. It features female contacts with 20 mohm resistance, suitable for applications requiring straight mounting and operating temperatures b/w -25 to 85°C.
WM-6S
TE Connectivity's WM-6S is a power and signal assembly item designed for DTM SERIES. With a temp range of -55 to 125°C, it accommodates wires up to 0 AWG using polybutylene terephthalate material. Ideal for various applications requiring robust wire connections.
1-794610-1
TE Connectivity 1-794610-1 CONTACT is a FEMALE solder terminal with 5A rated current and 250V DC voltage. Designed for POWER applications, it has a stranded construction, 0.52mm2 cross section area, and can accommodate wire sizes from 24 to 20 AWG.
0460-204-0490
TE Connectivity's 0460-204-0490 contact features crimp terminal type, machined contact design, and can handle wire gauge up to 6 AWG. With a rated current of 100A, it is ideal for applications requiring male gender contacts in straight mounting style with round pin/socket contact design.
DZ5CE003
Schneider Electric Sa
DZ5CE003 by Schneider Electric Sa is a plastic ferrule with approvals for NFC and UL. It can handle temperatures from -20 to 105°C, suitable for wire sizes up to 24 AWG. Ideal for electrical assemblies requiring reliable copper connectors in various applications.
HM2DK1256RLF
AMPHENOL ICC
CONNECTOR ACCESSORY; Assembly Item Name: CODING ITEM; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO;
12045773
Aptiv 12045773 CONTACT is a MALE CRIMP terminal with 0.067-0.109" cable entry. It has a STRAIGHT mounting style, 0.315" terminal length, and is made of NONFERROUS material. Ideal for assembly products requiring precise male contact connections.
204-0016-000
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: ACTUATING HANDLE KIT; Material: GLASS FILLED THERMOPLASTIC;
747784-8
TE Connectivity 747784-8 is a JACK SCREW for CABLE CONNECTORS. Made of STAINLESS STEEL, it supports up to 0 AWG wire size. Mounting options include #4-40 and SCREW, ideal for various assembly applications.
39-00-0039
Molex
Molex 39-00-0039 CONTACT is a FEMALE CRIMP terminal with BRASS material. It supports wire sizes from 24 AWG to 18 AWG, with a finish thickness of 35 and 0.122 inch max cable entry. Ideal for applications requiring SQUARE PIN-SOCKET contact design such as connectors 5557, 30067, 44516 OR 42474.
6-100525-3
CONNECTOR ACCESSORY; DIN Conformity: NO; Assembly Item Name: CODE KEY; Usage: PLUG; IEC Conformity: NO; Material: GLASS FILLED POLYAMIDE66;
M23053/5-106-9
Alpha Wire
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
M23053/5-103-9
3m Electronic Products Division
ASSEMBLY ITEMS; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN;
9025770000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Minimum Wire Size: 22 AWG; Assembly Item Name: FERRULE-STRAIGHT; Approvals (V): CSA; GOST; UL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSD77-8-DSL2
Panduit
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: YES; Assembly Item Name: FERRULE; Approvals (V): CSA; Maximum Cable Entry: .12 inch;
FSD77-8-D
Panduit's FSD77-8-D ferrule has CSA approval, DIN conformity, and polypropylene insulator. It supports 18 AWG wire with a 0.12" cable entry. Ideal for electrical assembly applications.
FSD74-8-D
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 24 AWG; Assembly Item Name: FERRULE; IEC Conformity: NO; Maximum Cable Entry: .07 inch; Approvals (V): CSA;
FSD78-8-DSL0
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Approvals (V): CSA; Maximum Cable Entry: .13 inch; DIN Conformity: YES;
FSD75-8-D
Panduit FSD75-8-D ferrule has CSA approval, made of polypropylene, and conforms to DIN standards. It supports 22 AWG wire with a max cable entry of 0.09". Ideal for electrical assembly applications.
FSD78-8-D
FSD78-8-D by Panduit is a ferrule with insulator material made of polypropylene. It has a max wire size of 16 AWG and can accommodate cables up to 0.12 inch in diameter. This assembly product is approved by CSA and conforms to DIN standards, making it suitable for various applications.
FSD75-8-DSL10
TERMINAL BLOCK ACCESSORY; DIN Conformity: YES; MIL Conformity: NO; Maximum Cable Entry: .1 inch; Approvals (V): CSA; Maximum Wire Size: 20 AWG;
FSD75-10-D
TERMINAL BLOCK ACCESSORY; DIN Conformity: YES; MIL Conformity: NO; Approvals (V): CSA; Assembly Item Name: FERRULE; IEC Conformity: NO;
FSD77-10-D
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; DIN Conformity: YES; Insulator Material: POLYPROPYLENE; MIL Conformity: NO; Approvals (V): CSA;
FSD78-12-D
TERMINAL BLOCK ACCESSORY; Assembly Item Name: FERRULE; Maximum Cable Entry: .12 inch; MIL Conformity: NO; Maximum Wire Size: 16 AWG; IEC Conformity: NO;
FSD76-8-DSL8
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Approvals (V): CSA; Assembly Item Name: FERRULE; Maximum Cable Entry: .11 inch; Maximum Wire Size: 18 AWG;
FSD78-10-D
FSD78-10-D by Panduit is a ferrule with insulator material made of polypropylene. It has approvals from CSA and conforms to DIN standards. This assembly product can accommodate a max wire size of 16 AWG and has a max cable entry of 0.12 inch.
FSD73-6-D
FSD73-6-D by Panduit is a ferrule assembly product made of polypropylene. It has CSA approvals and conforms to DIN standards. With a max wire size of 24 AWG and cable entry of 0.07 inch, it is suitable for various electrical applications.
FSD75-6-D
TERMINAL BLOCK ACCESSORY; Insulator Material: POLYPROPYLENE; Maximum Cable Entry: .09 inch; DIN Conformity: YES; Approvals (V): CSA; MIL Conformity: NO;
FSD77-6-D
Panduit's FSD77-6-D ferrule has CSA approval, DIN conformity, and polypropylene insulator. It supports 18 AWG wire with a max cable entry of 0.12". Ideal for electrical assembly applications.
FSD79-8-D
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 14 AWG; Approvals (V): CSA; DIN Conformity: YES; IEC Conformity: NO; Assembly Item Name: FERRULE;
FSD76-12-D
TERMINAL BLOCK ACCESSORY; Assembly Item Name: FERRULE; Approvals (V): CSA; Insulator Material: POLYPROPYLENE; MIL Conformity: NO; Maximum Cable Entry: .11 inch;
FSD76-8-D
Panduit's FSD76-8-D ferrule has CSA approval, made of polypropylene, and conforms to DIN standards. It supports up to 20 AWG wire size with a max cable entry of 0.11 inch. Ideal for electrical assembly applications.
FSD77-12-D
TERMINAL BLOCK ACCESSORY; Assembly Item Name: FERRULE; IEC Conformity: NO; Approvals (V): CSA; MIL Conformity: NO; DIN Conformity: YES;
FSD73-8
TERMINAL BLOCK ACCESSORY; Maximum Cable Entry: .07 inch; Material: COPPER; MIL Conformity: NO; Additional Features: TIN PLATED; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved