Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Panasonic EEUHD1H332 is a 3300uF aluminum electrolytic capacitor with 50V URdc. It features tan delta of 0.16, leakage current of 1.65mA, and ripple current of 1770mA. Ideal for applications requiring high capacitance and voltage stability in automotive electronics due to AEC-Q200 compliance.
Median Price
$4.765
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$4.150
100+ parts
$1.810
1k+ parts
-
10k+ parts
Mouser Electronics
$5.380
$2.860
DigiKey
$2.806
$2.315
$2.190
Newark
$5.990
$3.840
$3.680
$3.610
Element14
$6.230
$3.990
$2.950
Master Electronics
$2.030
$1.870
Verical
$2.509
$2.445
TTI
$1.890
$1.850
Distrelec
Nova Conductors
$2.650
Vyrian
Electro Sonic
$2.180
$1.920
$1.800
IBS Electronics
$2.847
$2.623
$2.510
AZTECH Wire
$0.620
$0.600
$0.580
$0.570
Ampacity Inc.
$1.770
Continental Prestige Electronics
$2.597
Argo Parts USA
Netroflash
Authorized Procurement Solutions
Perfect Parts
The use of aluminum (wet) as the dielectric material ensures reliable performance and long lifespan of the capacitor.
The low value of tan delta indicates minimal power loss in the capacitor during operation, leading to efficient energy usage.
With a low leakage current, this capacitor is suitable for applications where high reliability and stability are required.
The high ripple current rating allows this capacitor to handle fluctuations in current smoothly, making it ideal for applications with varying power loads.
The radial package style allows for easy mounting and installation of the capacitor on PCBs, making it convenient for assembly.
With a high capacitance value, this capacitor can store a large amount of charge, making it suitable for applications requiring high energy storage.
The high rated DC voltage ensures that the capacitor can safely operate within specified limits without risk of damage, making it reliable for various voltage applications.
Fixed Capacitors EEUHD1H332 attributes and parameters. Explore more Fixed Capacitors devices from Panasonic
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Ripple Current (mA):
Tan Delta:
Terminal Finish:
Terminal Pitch:
Terminal Shape:
EEUHD1H332 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.20
SB
PCN Assembly/Origin - EEU series Assembly site chg 16/DEC/2019
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
Promax-johnton
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
CL10C220JB8NNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL10C220JB8NNNC is a ceramic capacitor with 0.000022 uF capacitance and 50V URdc. With C0G temp characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring high precision and stability in a compact form factor.
GRM155R61C105KA12D
Murata Manufacturing
The Murata Manufacturing GRM155R61C105KA12D is a ceramic capacitor with 1uF capacitance, rated for 16V. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Commonly used in SMT applications due to its small size (1x0.5x0.5mm) and multi-layer design for compact electronics.
T491X107K025AT
KEMET Corporation
T491X107K025AT by KEMET: Tantalum capacitor with 100uF capacitance, 25V rated DC voltage, and 0.08 Tan Delta. Ideal for applications requiring high ripple current handling in compact SMT designs.
CL10C330JB8NNNC
Samsung Electro-mechanics CL10C330JB8NNNC is a ceramic capacitor with capacitance of 0.000033 uF and rated DC voltage of 50V. With temperature coefficient of 30ppm/°C, it's ideal for applications requiring high precision and stability in a compact SMT package.
EEVFK1J471M
Panasonic
Panasonic EEVFK1J471M is a 470uF Aluminum Electrolytic Capacitor with 63V URdc. It features Tan Delta of 0.08, Leakage Current of 0.2961mA, and Ripple Current of 1057.5mA, making it ideal for automotive applications due to AEC-Q200 compliance and operating temperatures ranging from -55°C to 105°C.
C0402S221K5RACTU
KEMET C0402S221K5RACTU is a ceramic capacitor with 0.00022uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.5mm and wraparound terminals for easy mounting in various electronic devices.
C2012X5R1H475K125AB
TDK
The TDK C2012X5R1H475K125AB is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
CGA2B3X7R1H104K050BB
The TDK CGA2B3X7R1H104K050BB is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
GRM32ER61E226KE15L
Murata Manufacturing's GRM32ER61E226KE15L is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
GRM155R61E105KA12D
Murata Manufacturing's GRM155R61E105KA12D is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
M39006/22-0639
Vishay Intertechnology
Vishay Intertechnology's M39006/22-0639 is a TANTALUM CAPACITOR with 86uF capacitance, 100V URdc, and 0.1 Tan Delta. Ideal for MIL-PRF-39006/22 applications requiring high ripple current (486mA) and low leakage current (0.009mA). With a tubular package shape, it operates b/w -55 to 125 °C in through-hole mounts.
CL10A105KA8NNNC
CL10A105KA8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
CL10B102KB8NNNC
CL10B102KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with a capacitance of 0.001 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for electronic devices.
GCM188R71H103KA37D
Murata Manufacturing's GCM188R71H103KA37D is a ceramic capacitor with 0.01uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
C0603C102K5RACTU
KEMET Corporation's C0603C102K5RACTU is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.001 uF capacitance. Ideal for surface mount applications in electronics, it operates b/w -55 to 125 °C with a rated DC voltage of 50 V.
EEEFK1E470P
Panasonic EEEFK1E470P is a 47uF aluminum electrolytic capacitor with 25V rated DC voltage. It has tan delta of 0.14 and leakage current of 0.01175mA, suitable for AEC-Q200 applications in automotive electronics due to its high ripple current capability of 180mA.
TMK107BJ105KA-T
Taiyo Yuden
TMK107BJ105KA-T by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
C0402C104K4RACAUTO
C0402C104K4RACAUTO by KEMET Corporation is a ceramic capacitor with a capacitance of 0.1 uF and rated DC voltage of 16 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This surface mount capacitor is commonly used in automotive applications, meeting the AEC-Q200 standard.
CL21A475KBQNNNE
Samsung Electro-mechanics' CL21A475KBQNNNE is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It features X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
GRM155R61A106ME11D
GRM155R61A106ME11D by Murata is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55°C to 85°C. Ideal for surface mount applications in electronics due to its compact size and wraparound terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EEUHD1E102
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1000 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEUHD1V332B
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 3300 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEUHD1C153
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 15000 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEUHD1A682
EEUHD1A682 by Panasonic is a 6800 uF aluminum electrolytic capacitor with a rated DC voltage of 10 V. It has a max operating temperature of 105 °C and a min operating temperature of -55 °C. This capacitor is commonly used in automotive applications due to its AEC-Q200 reference standard and through-hole mounting feature.
EEUHD1A682B
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 6800 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEUHD1V332
Panasonic EEUHD1V332 is a 3300uF aluminum electrolytic capacitor with 35V rated DC voltage. It features low tan delta of 0.18 and high ripple current of 1610mA, suitable for automotive applications meeting AEC-Q200 standard.
EEUHD1E103
EEUHD1E103 by Panasonic is a 10000 uF aluminum electrolytic capacitor with a rated DC voltage of 25 V. It has a max operating temperature of 105 °C and a min operating temperature of -55 °C. This capacitor is commonly used in automotive applications due to its AEC-Q200 reference standard.
EEUHD1E221B
EEUHD1E221B by Panasonic is a 220uF aluminum electrolytic capacitor with a rated DC voltage of 25V. It has a low tan delta of 0.16 and a leakage current of 0.055mA, making it suitable for applications requiring high ripple current tolerance and low power loss.
EEUHD1E222
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 2200 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEUHD1H222
Panasonic EEUHD1H222 is a 2200uF aluminum electrolytic capacitor with 50V URdc. It features tan delta of 0.14, ripple current of 1470mA, and -55 to 105°C operating temperature range. Ideal for automotive applications meeting AEC-Q200 standard.
EEUHD1H2R2
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEUHD1V222B
EEUHD1V222B by Panasonic is a 2200 uF aluminum electrolytic capacitor with a rated DC voltage of 35 V. It has a max operating temperature of 105 °C and a min operating temperature of -55 °C. This capacitor is commonly used in automotive applications due to its AEC-Q200 reference standard.
EEUHD1H471
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEUHD1E682
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 6800 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEUHD1V222
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 2200 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEUHD1V472
EEUHD1V472 by Panasonic is a 4700 uF aluminum electrolytic capacitor with a rated DC voltage of 35 V. It has a max operating temperature of 105 °C and a min operating temperature of -55 °C. This capacitor is commonly used in applications that require high capacitance and reliable performance, such as power supplies and automotive electronics.
EEUHD1E471
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEUHD1E101B
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEUHD1E332
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 3300 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EEUHD1H100H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved