Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV8505D2T33G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.4A. It operates in an extended temperature range from -40 to 150 °C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$1.610
$1.550
$1.520
$1.490
Problanco Electronics
SupplyDigital Components
TANS Electronics
Kulean Microsystems
Corphita
Corohmni
UHIMA Technologies
Vigor
Microchip USA
The use of plastic/epoxy package body material makes this product lightweight and durable.
With a low maximum dropout voltage, this regulator can maintain a stable output voltage even when the input voltage drops.
The surface mount capability makes it easy to integrate this regulator into compact electronic designs.
With a high operating temperature range, this regulator can be used in various environmental conditions.
The AEC-Q100 screening level ensures that this regulator meets the automotive industry's stringent quality standards.
The bipolar technology used in this regulator ensures stable and low-noise operation.
The rectangular package shape allows for easy and efficient PCB layout and mounting.
The gull wing terminal form provides strong mechanical connection and easy soldering during assembly.
With a low minimum operating temperature, this regulator can also be used in cold environments.
The rail packing method simplifies the handling and storage of multiple regulators for production purposes.
The minimum output voltage of 3.201 V ensures that this regulator can provide a stable voltage output above this level.
The 3% maximum voltage tolerance ensures accurate and consistent output voltage regulation.
The nominal output voltage of 3.3 V makes this regulator suitable for various electronic applications requiring a stable voltage supply.
The 7 terminals provide multiple connection points for input, output, and ground connections, allowing for flexibility in circuit design.
The small outline package style saves space on the PCB and allows for dense component placement.
The fixed adjustability of this regulator eliminates the need for external adjustment components, simplifying the design and reducing cost.
The 1.27 mm terminal pitch facilitates easy PCB layout and soldering, especially for automated assembly processes.
The low maximum line regulation ensures stable output voltage even with variations in input voltage.
Being a fixed positive single output LDO regulator, this product is designed for applications that require a stable and low-noise voltage supply.
The tin terminal finish provides good solderability and reliability in various operating conditions.
The single terminal position simplifies the connection and installation of the regulator in the circuit.
The maximum output voltage of 3.399 V ensures that this regulator can deliver a stable voltage output within this range.
The MSL 3 rating indicates that this regulator has moderate sensitivity to moisture exposure during handling and storage.
The low maximum seated height enables this regulator to be used in compact electronic devices with height restrictions.
The 8.89 mm width of this regulator allows for efficient use of space on the PCB while providing necessary clearance for other components.
The low maximum load regulation ensures that this regulator can deliver a stable output voltage even with varying load conditions.
The minimum input voltage of 4.5 V ensures that this regulator can operate within a wide range of input voltage levels.
With a maximum output current of 0.4 A, this regulator can provide sufficient current for powering various electronic components.
The 30-second maximum time at peak reflow temperature ensures proper soldering and reflow of this regulator during assembly.
The peak reflow temperature of 260 °C allows for reliable and efficient soldering of this regulator on the PCB.
The nominal dropout voltage of 0.4 V ensures that this regulator can provide a stable output voltage even when the input voltage is close to the output voltage.
The 10.16 mm length of this regulator allows for efficient use of space on the PCB while providing necessary clearance for other components.
The high maximum input voltage of 26 V makes this regulator suitable for applications that require regulation of higher input voltages.
The absolute maximum input voltage of 45 V ensures that this regulator can withstand transient voltage spikes without damage.
Fixed Regulators - Positive Single Output LDO NCV8505D2T33G attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Screening Level:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCV8505D2T33G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 30/Mar/2012
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0603FR-0710KL
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Wuxi Xuyang Electronic
LT1086IM-3.3#PBF
Analog Devices
LT1086IM-3.3#PBF by Analog Devices is a 3.3V fixed positive single output LDO regulator with max output current of 1.5A, ideal for applications requiring stable voltage supply in a compact package. It operates b/w -40 to 125°C, has a dropout voltage of 1.5V, and offers excellent line/load regulation at ±0.01%/±0.025%.
LT3032EDE#TRPBF
Analog Devices' LT3032EDE#TRPBF is a fixed positive single output LDO regulator with a max output current of 0.15A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in need of stable voltage regulation in compact spaces. The package style is small outline with very thin profile, ideal for surface mount designs requiring efficient heat dissipation.
LM1117MPX-2.5/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
LM1117DTX-5.0/NOPB
Texas Instruments
LM1117DTX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1.3V, suitable for applications requiring stable voltage regulation. It has a max output current of 0.8A, operating temperature range from 0 to 125°C, and comes in a small outline package style for compact designs.
TPS77018DBVR
TPS77018DBVR by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 1.8V and max current of 50mA. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline, low profile, shrink pitch, ideal for space-constrained designs.
LP2985A-50DBVRG4
LP2985A-50DBVRG4 by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.15A max output current. It has a small outline, low profile package style and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LT1764AEQ-3.3
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.54 %;
LM1117IMP-3.3
LF33CDT-TR
LF33CDT-TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It has a small outline package style with gull wing terminals, making it suitable for applications requiring stable voltage regulation in compact spaces. With a max input voltage of 16V and operating temperature range from -40°C to 125°C, this regulator is ideal for various electronic devices and systems.
LM1117MPX-3.3
LT1121IST-5#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 3 %;
TL750L05CKTER
TL750L05CKTER by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.15A. It operates in an input voltage range of 6-26V, making it suitable for various applications requiring stable voltage regulation in compact designs. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount PCB assemblies where space is limited.
LT1763CS8-2.5#TRPBF
Analog Devices' LT1763CS8-2.5#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max output current of 0.5A. It features a small outline package style, matte tin terminal finish, and operates within an input voltage range of 1.8V to 20V. Ideal for applications requiring precise voltage regulation in compact electronic devices.
MIC5209-3.3YS
Micrel
LM1117IDT-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
NCP553SQ33T1G
Onsemi
NCP553SQ33T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.08A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, thin profile, ideal for surface mount assembly with a terminal pitch of 1.3mm.
ADM7172ACPZ-3.3-R7
ADM7172ACPZ-3.3-R7 by Analog Devices is a Fixed Positive Single Output LDO Regulator with 3.3V nominal output voltage, 2A max output current, and 1.5% max voltage tolerance. Ideal for applications requiring stable power supply in compact spaces due to its very thin profile chip carrier package style.
LT1963AEQ-3.3#PBF
LT1963AEQ-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 1.5 A. It has a small outline package style, operates in temperatures ranging from -40 to 125 °C, and is suitable for applications requiring precise voltage regulation in electronic circuits.
LM1117DTX-2.5/NOPB
LM1117DTX-2.5/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max output current of 0.8A, suitable for applications requiring stable voltage regulation in the range of 3.9V to 10V input voltage. It features low dropout voltage of 1.2V, making it ideal for compact designs where space is limited, with excellent load and line regulation capabilities for reliable performance in various electronic devices.
ADP7142AUJZ-5.0-R7
ADP7142AUJZ-5.0-R7 by Analog Devices is a CMOS LDO regulator with 5V output voltage, 0.2A output current, and 1mm max seated height. Ideal for applications requiring fixed positive single output regulators in compact spaces due to its small outline package style and wide operating temperature range from -40°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV8664ST50T3G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 2 %;
NCV8187AMT330TAG
Onsemi's NCV8187AMT330TAG is a Fixed Positive Single Output LDO Regulator with 3.3V nominal output voltage, 1.2A max output current, and 0.22V max dropout voltage. Ideal for automotive applications due to AEC-Q100 screening level and operating temperature range of -40°C to 150°C.
NCV8177BMX330TCG
NCV8177BMX330TCG by Onsemi is a fixed positive single output LDO regulator with a max dropout voltage of 0.19V and an operating temperature range of -40°C to 125°C. It is commonly used in applications requiring a regulated output voltage of 3.3V, such as automotive electronics or portable devices.
NCV8165ML330TCG
NCV8165ML330TCG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It operates in an input voltage range of 4.3V to 5.5V, making it suitable for various applications requiring stable voltage regulation in automotive electronics and industrial control systems. With AEC-Q100 screening level, this regulator ensures reliable performance even in harsh environments at temperatures ranging from -40°C to 125°C.
NCV8705MT33TCG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
NCV86603BDT50RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Length: 6.54 mm; Maximum Time At Peak Reflow Temperature (s): 30;
NCV8674DS120G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 2 %; Operating Temperature (TJ-Min): -40 Cel;
NCV8664CST33T3G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 2 %;
NCV8187AMLE330TCG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
NCV8675DS50R4G
NCV8675DS50R4G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.2A. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. With a compact rectangular package style and surface mount capability, this regulator offers precise voltage control with minimal dropout voltage for efficient power management.
NCV8675DT50RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Package Shape: RECTANGULAR; Minimum Input Voltage: 4.5 V;
NCV8161ASN330T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Peak Reflow Temperature (C): 260;
NCV8603SN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3 %;
NCV8161ASN180T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Terminal Finish: MATTE TIN;
NCV8165ML330TBG
NCV8165ML330TBG by Onsemi is a Fixed Positive Single Output LDO Regulator with a nominal output voltage of 3.3V and max output current of 0.5A. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly in tight layouts.
NCV8711ASN500T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 22 V; Maximum Voltage Tolerance: 2 %;
NCV8675DT33RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Peak Reflow Temperature (C): 260; Package Body Material: PLASTIC/EPOXY;
NCV8675DS33R4G
NCV8675DS33R4G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.2A. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. With a compact package style and AEC-Q100 screening level, this regulator offers precise performance for automotive electronics.
NCV8675DS50G
NCV8675DS50G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
NCV8537MN330R2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 1.5 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved