Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Onsemi's NCV2931AST-5.0T3 is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a small outline package style, operates b/w -40 to 125 °C, and is suitable for applications requiring precise voltage regulation in automotive electronics.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
SupplyDigital Components
Problanco Electronics
Metaverse IC Inc.
Microchip USA
Kepictronics
TANS Electronics
Kulean Microsystems
QUARKTWIN TECHNOLOGY LTD
Corphita
UHIMA Technologies
Corohmni
Vigor
The use of plastic/epoxy material provides durability and protection, making the product suitable for various applications.
Low dropout voltage ensures efficient power conversion and minimal power loss, making the product energy-efficient.
Surface mount capability allows for easy and convenient installation on PCBs, saving space and simplifying assembly.
Wide operating temperature range makes the product suitable for use in harsh environments or under demanding conditions.
AEC-Q100 certification ensures high quality and reliability, making the product suitable for automotive applications.
Bipolar technology provides stable and accurate voltage regulation, making the product a reliable choice for various electronic devices.
Rectangular package shape allows for easy integration and placement on PCBs, enhancing the overall design and layout.
Gull wing terminal form enables secure and reliable connections, ensuring stable performance and reducing the risk of disconnection.
Rail packing method facilitates handling and storage, making it convenient for manufacturing and distribution processes.
Stable minimum output voltage ensures consistent power supply, meeting the requirements of sensitive electronic components.
Fixed Regulators - Positive Single Output LDO NCV2931AST-5.0T3 attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Screening Level:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
NCV2931AST-5.0T3 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
2N7002-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
Rectron
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
National Semiconductor
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
LM1117T-3.3/NOPB
LM1117T-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 0.8 A. It features a max dropout voltage of 1.3 V, making it suitable for applications requiring stable voltage regulation in a compact package style with through-hole terminals. Operating efficiently within an extended temperature range from 0 to 125°C, this regulator offers precise line and load regulation for various electronic devices.
LP2985AIM5-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
LD3985M33R
STMicroelectronics
STMicroelectronics' LD3985M33R is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, low profile, shrink pitch, ideal for surface mount designs with limited space constraints.
LM1086ISX-1.8/NOPB
LM1086ISX-1.8/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1.5A and a nominal output voltage of 1.8V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With surface mount capability and small outline package style, it offers efficient performance in electronic devices with limited space constraints.
MIC5323-3.3YD5-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
LM1086ILD-3.3/NOPB
LM1086ILD-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1.5A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With its small outline package style and surface mount capability, this regulator is ideal for space-constrained electronic devices where precise voltage control is essential.
LP2950CDT-5.0RKG
LP2950CDT-5.0RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a small outline package style, operates b/w -40 to 125 °C, and is suitable for applications requiring precise voltage regulation in compact spaces.
LP2951-33DRGR
LP2951-33DRGR by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.1A max output current. It operates b/w -40 to 125°C, has a dropout voltage of 0.38V, and is suitable for applications requiring stable voltage regulation in compact spaces.
LT1761ES5-3.3#PBF
Analog Devices
LT1761ES5-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with a max dropout voltage of 0.45V and an operating temperature range of -40°C to 125°C. It is commonly used in applications that require a stable and regulated output voltage of 3.3V, such as portable electronic devices or battery-powered systems.
LM2936HVBMAX5.0/NOPB
Texas Instruments LM2936HVBMAX5.0/NOPB is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.4V max dropout voltage, and 0.05A max output current. Ideal for applications requiring stable voltage regulation in compact spaces with operating temperatures ranging from -40°C to 150°C.
LM2936Z-5.0/NOPB
LM2936Z-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.05A. It has a max dropout voltage of 0.4V, making it suitable for applications requiring stable power supply in temperature-sensitive environments such as automotive electronics and industrial control systems.
LM1117IMPX-5.0
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
TPS76918DBVT
TPS76918DBVT by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 1.8V and max current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
AP2112K-3.3TRG1
Bcd Semiconductor Manufacturing
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.5 %; Nominal Output Voltage-1: 3.3 V;
LM2936M-3.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
LM1117IMPX-5.0/NOPB
LM1117MP-3.3/NOPB
MIC5317-3.3YM5-TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Output Voltage-1: 3.399 V; Package Style (Meter): SMALL OUTLINE, LOW PROFILE, SHRINK PITCH;
LM2936DT-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV2931AZ-5.0G
NCV2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.1 A and a dropout voltage of 0.6 V. It is commonly used in automotive applications due to its AEC-Q100 screening level and wide operating temperature range (-40°C to 125°C).
NCV2931AZ-5.0RAG
NCV2931AZ-5.0RAG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation with low dropout voltage.
NCV2931AD-5.0R2G
NCV2931AD-5.0R2G by Onsemi is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.1A max output current, and 40V max input voltage. It is ideal for automotive applications due to AEC-Q100 screening level and small outline package style.
NCV2951ACD3.3R2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.4 %;
NCV2931D2T5.0R4G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 10 %;
NCV2931AD-5.0R2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;
NCV2931ADT-5.0RK
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %; Length: 6.54 mm;
NCV2931ADT5.0RKG
Onsemi's NCV2931ADT5.0RKG is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.6V, suitable for applications requiring stable voltage regulation in automotive environments. It operates within a temperature range of -40 to 150°C, making it ideal for various electronic systems that demand reliable power management solutions. The package style is small outline with gull wing terminals, facilitating surface mount assembly for compact designs.
NCV2931AST-5.0T3G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;
NCV2931D2T-5.0R4
NCV2931D-5.0R2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 10 %;
NCV2931D-5.0R2G
NCV2931DT-5.0RK
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 10 %;
NCV2931DT-5.0RKG
NCV2951ACD-3.3R2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved