Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP565D2T12 by Onsemi is a fixed positive single output LDO regulator with 1.5A max output current and 1.3V dropout voltage, ideal for applications requiring stable voltage supply in compact spaces. Operating temperature range from -40 to 150 °C makes it suitable for various environments. Package style is small outline, making it easy to integrate into PCB designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
ComSIT Distribution GmbH
Inventory MP
Bristol Electronics
Rebound Electronics
Prism Electronics
AZTECH Wire
$3.170
$3.040
$2.980
$2.920
TANS Electronics
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
UHIMA Technologies
Vigor
Corohmni
Corphita
Perfect Parts
The use of plastic/epoxy material for the package body makes this product lightweight and durable, making it suitable for a variety of applications.
With a maximum dropout voltage of 1.3V, this regulator can maintain a stable output voltage even when the input voltage drops, ensuring reliable performance.
Being surface mountable makes this regulator easy to integrate into circuit boards, saving space and allowing for efficient assembly processes.
With a high operating temperature limit of 150 °C, this regulator can operate in demanding environments without compromising its performance.
The rectangular shape of the package allows for easy placement and mounting onto PCBs, enhancing the overall design flexibility of the product.
The gull wing terminal form provides reliable contact and secure connection to the circuit board, ensuring stable operation and reducing the risk of signal loss.
With a low operating temperature limit of -40 °C, this regulator can function effectively in a wide range of temperature conditions, making it versatile and reliable.
The tube packing method offers a convenient and organized way to store and transport the regulators, simplifying inventory management and handling.
The minimum output voltage of 1.164V ensures that this regulator can provide a stable and precise output voltage, meeting the requirements of sensitive electronic devices.
With a maximum voltage tolerance of 3%, this regulator can maintain accurate and consistent output voltage levels, ensuring reliable operation in various applications.
The nominal output voltage of 1.2V makes this regulator suitable for powering a wide range of electronics, providing a stable and regulated voltage supply.
Having 2 terminals simplifies the installation and connections of the regulator, making it easy to integrate into circuit designs and reducing assembly complexity.
The small outline package style saves space on the PCB, allowing for compact and efficient circuit designs, which is ideal for applications with limited board space.
The fixed adjustability of this regulator eliminates the need for fine-tuning, making it easy to use and suitable for applications where a stable output voltage is required.
The 2.54mm terminal pitch provides compatibility with standard PCB layouts, allowing for easy integration into existing designs and facilitating assembly processes.
As a fixed positive single output LDO regulator, this product offers reliable voltage regulation with low dropout voltage, making it ideal for applications requiring a consistent and precise power supply.
The tin lead terminal finish ensures good solderability and robust connections, enhancing the reliability and longevity of the regulator in various operating conditions.
With a single terminal position, this regulator simplifies installation and wiring, reducing the risk of errors and making it easy to incorporate into circuit designs.
The maximum output voltage of 1.236V allows for a stable and regulated voltage supply, meeting the power requirements of connected devices and ensuring safe operation.
The maximum seated height of 4.826mm allows for easy integration into compact electronic devices, making this regulator suitable for space-constrained applications.
The compact width of 9.1945mm saves space on the PCB, allowing for efficient board layout and compact system designs, making it ideal for small form factor applications.
With a minimum input voltage of 2.5V, this regulator can operate with a wide range of input voltages, making it versatile and suitable for various power supply applications.
With a maximum output current of 1.5A, this regulator can deliver sufficient power to drive a variety of electronic components, making it versatile and capable of meeting different power requirements.
The peak reflow temperature of 235 °C ensures reliable soldering during assembly processes, allowing for secure and durable connections between the regulator and the PCB.
The nominal dropout voltage of 0.9V indicates the minimum voltage drop between the input and output, ensuring efficient power conversion and minimal power loss, making this regulator energy-efficient.
The length of 10.02mm allows for easy placement and integration into PCB designs, providing flexibility in circuit layout and ensuring compatibility with standard board sizes.
With a maximum input voltage of 9V, this regulator can handle a wide range of input voltages, making it versatile and suitable for various applications requiring different power levels.
The maximum absolute input voltage of 9V ensures that the regulator can withstand voltage spikes or variations without damage, providing robust protection for connected devices and circuits.
Fixed Regulators - Positive Single Output LDO NCP565D2T12 attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
NCP565D2T12 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 27/Jun/2007
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Bkc Semiconductors
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
NCP1117LPST50T3G
NCP1117LPST50T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
LM2936HVMA-5.0
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
LDL1117S50R
STMicroelectronics' LDL1117S50R is a fixed positive single output LDO regulator with a max output current of 1.2A and a dropout voltage of 0.6V. This surface-mount device, suitable for applications requiring stable 5V output voltage, operates in temperatures ranging from -40 to 125°C.
AP2210K-3.3TRG1
Diodes Inc. AP2210K-3.3TRG1 is a 3.3V fixed positive single output LDO regulator with max dropout voltage of 0.5V and max output current of 0.3A, suitable for applications requiring stable voltage supply in compact spaces like consumer electronics and IoT devices.
LM4132CQ1MFT3.3
LM4132CQ1MFT3.3 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 0.4V, suitable for applications requiring stable voltage regulation in automotive environments. It features a small outline package style, dual terminal position, and matte tin finish, making it ideal for compact designs with stringent space constraints.
LT1963AEST-1.8#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.5 %;
TLV70233DBVT
TLV70233DBVT by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.375V max dropout voltage, and 0.3A max output current. It is ideal for applications requiring low power consumption in compact electronic devices due to its small outline package style and wide operating temperature range from -40°C to 125°C.
LM1117SX-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
LT1086CM-3.3
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
LD39050PU33R
LD39050PU33R by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 0.5 A. It has a nominal output voltage of 3.3 V and can operate in temperatures ranging from -40°C to 125°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
LP2985IM5-4.5/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4 %;
MIC2920A-3.3WS-TR
Microchip Technology
MIC2920A-3.3WS-TR by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.4A max output current. It features a small outline package, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
ADP151AUJZ-3.3-R7
Analog Devices
ADP151AUJZ-3.3-R7 by Analog Devices is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.2A max output current, and 5 terminals. It operates in temperatures ranging from -40 to 125°C and is ideal for applications requiring precise voltage regulation in compact spaces.
LD1117DT25TR
STMicroelectronics LD1117DT25TR is a fixed positive single output LDO regulator with 2.5V nominal output voltage and 1.3A max output current. It has a small outline package style, operates at temperatures up to 125°C, and is suitable for applications requiring low dropout voltage and precise voltage regulation.
ADM7150ARDZ-5.0
ADM7150ARDZ-5.0 by Analog Devices is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.8A max output current, and 1V max dropout voltage. It is ideal for applications requiring stable power supply in compact spaces with operating temperatures ranging from -40 to 125°C.
NCV4274ADT50RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Qualification Status: Not Qualified; Maximum Time At Peak Reflow Temperature (s): 30;
LP2985IM5-3.3
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4 %;
LM1084ISX-3.3/NOPB
LM1084ISX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 5.5A and an operating temperature range from -40°C to 125°C. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in compact spaces such as portable electronic devices or automotive systems.
TLV1117LV25DCYR
TLV1117LV25DCYR by Texas Instruments is a fixed positive single output LDO regulator with 2.5 V nominal output voltage and 1 A max output current. It operates in temperatures ranging from -40 to 125 °C and has a max dropout voltage of 0.8 V, making it ideal for various electronic applications requiring stable voltage regulation.
LT1963EST-3.3#PBF
LT1963EST-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with 1.5A max output current, 3% voltage tolerance, and 0.01% line regulation. Ideal for applications requiring stable 3.3V output voltage in compact designs with surface mount technology.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP511SN33T1G
NCP511SN33T1G by Onsemi is a 3.3V fixed positive LDO regulator with a max output current of 0.15A and dropout voltage of 0.2V, suitable for applications requiring stable voltage supply in compact designs. Operating temperature range from -40 to 125°C makes it versatile for various environments, while its small outline package with dual terminals ensures easy integration in space-constrained PCB layouts.
NCP508SQ33T1G
NCP508SQ33T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.04A. It has a small outline package style, making it suitable for surface mount applications where precise voltage regulation is required within an operating temperature range of -40 to 125°C. The regulator offers low dropout voltage at 0.3V and excellent line/load regulation for reliable performance in various electronic devices.
NCP5501DT33RKG
NCP5501DT33RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It has a small outline package style, operates at temperatures ranging from -40 to 85°C, and is suitable for applications requiring stable voltage regulation in electronic circuits.
NCP551SN33T1G
NCP551SN33T1G by Onsemi is a 3.3V fixed positive single output LDO regulator with a max dropout voltage of 0.15V and operating temperature up to 150°C. Ideal for applications requiring stable voltage regulation in compact spaces, such as IoT devices or portable electronics.
NCP5662DS33R4G
NCP5662DS33R4G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 2A max output current, and 1.3V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package with surface mount capability.
NCP5663DS15R4G
NCP5663DS15R4G by Onsemi is a fixed positive single output LDO regulator with 1.5V nominal output voltage, 3A max output current, and 1.3V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package, such as consumer electronics and industrial control systems.
NCP553SQ33T1G
NCP553SQ33T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.08A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, thin profile, ideal for surface mount assembly with a terminal pitch of 1.3mm.
NCP512SQ50T2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
NCP551SN50T1G
NCP551SN50T1G by Onsemi is a 5V fixed positive single output LDO regulator with a max dropout voltage of 0.15V and max output current of 0.15A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP5501DT50RKG
NCP5501DT50RKG by Onsemi is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.5A max output current. It operates b/w -40 to 85°C, suitable for applications requiring stable voltage regulation in compact spaces. The package style is small outline with a matte tin terminal finish, making it ideal for surface mount designs.
NCP5500DT33RKG
NCP5500DT33RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from -40°C to 150°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
NCP500SN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2.5 %;
NCP502SN33T1G
NCP502SN33T1G by Onsemi is a 3.3V fixed positive single output LDO regulator with a max dropout voltage of 1.2V and max output current of 0.08A. It operates b/w -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces like consumer electronics and IoT devices.
NCP565D2T12G
NCP565D2T12G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1.5A and an operating temperature range from -40°C to 150°C. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in limited space environments.
NCP551SN30T1G
NCP551SN30T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3V and max dropout voltage of 0.15V. It operates in temperatures ranging from -40 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP59301DS50R4G
NCP59301DS50R4G by Onsemi is a fixed positive single output LDO regulator with 5V nominal output voltage, 3A max output current, and 0.5V max dropout voltage. Ideal for applications requiring stable voltage regulation in a compact package with high efficiency and low dropout characteristics.
NCP565D2T33R4G
NCP565D2T33R4G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 1.5A Max Output Current, and 1.3V Max Dropout Voltage suitable for various applications requiring stable voltage regulation in compact electronic devices.
NCP584HSN18T1G
NCP584HSN18T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 1.8V and max output current of 0.25A. It operates in an extended temperature range from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, low profile, shrink pitch, ideal for space-constrained PCB layouts.
NCP565ST12T3G
NCP565ST12T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1.5A and an operating temperature range from -40°C to 150°C. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in compact spaces.
NCP5501DT33G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 4.9 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved