Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP5391MNR2G by Onsemi is a 32-terminal switching regulator with max. operating temp of 70 °C and max. switching frequency of 1000 kHz. Ideal for voltage-mode control applications in commercial-grade electronics due to its chip carrier package style and surface-mount compatibility.
Median Price
$1.313
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.270
1k+ parts
$1.050
10k+ parts
$0.940
DigiKey
$1.590
Verical
$1.175
Digiode
$0.988
Chip Stock
Cyclops Electronics Ltd
Vyrian
Corphita
$0.936
Corohmni
$0.954
Vigor
$1.000
AZTECH Wire
$8.380
Continental Prestige Electronics
$0.874
SupplyDigital Components
Kepictronics
Kulean Microsystems
Authorized Procurement Solutions
A-Z Elektronik GmbH
Problanco Electronics
TANS Electronics
Futuretech Components
Microchip USA
UHIMA Technologies
The use of plastic/epoxy material ensures durability and helps in reducing the overall weight of the product.
Allows for easy and efficient installation on circuit boards, saving space and enabling automated assembly.
Square package shape provides better stability and easier placement on the circuit board.
Having 32 terminals allows for more connectivity options and versatility in usage.
Voltage-mode control ensures stable and precise regulation of the output voltage.
High switching frequency allows for efficient power conversion and smaller external components.
Switching Regulators & Controllers NCP5391MNR2G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Control Mode:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Sub-Category:
Surface Mount:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
NCP5391MNR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 30/Sept/2011
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bkc Semiconductors
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Meritek Electronics
BAV99WT1G
Fairchild Semiconductor
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2664M6/NOPB
Texas Instruments
LM2664M6/NOPB by Texas Instruments is a small outline, low profile switched capacitor converter with 6 terminals. It operates at -40 to 85°C, providing -5.5V output voltage from a 1.8-5.5V input range. With a max output current of 0.04A and switching frequency of 80kHz, it's ideal for industrial applications requiring efficient voltage conversion in compact spaces.
LM51561DSSR
LM51561DSSR by Texas Instruments is a switching controller with a 12V nominal input voltage and 300V max output voltage. Operating in current-mode control technique, it has a max switching frequency of 500 kHz. Ideal for automotive applications due to its -40 to 125 °C temperature grade range.
LM2678S-3.3/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LM25011AQ1MYX/NOPB
LM25011AQ1MYX/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various automotive applications. With a compact square package style and surface-mount capability, it offers high efficiency with a max switching frequency of 2000 kHz.
LM2664M6X/NOPB
SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC1144IS8#PBF
Analog Devices
LTC1144IS8#PBF by Analog Devices is a CMOS switched capacitor converter with 8 terminals, operating b/w -40 to 85°C. It has a max input voltage of 18V and nominal input voltage of 15V, suitable for industrial applications. With a small outline package style and surface mount capability, it offers a max switching frequency of 10 kHz.
LMR54410FDBVR
LMR54410FDBVR by Texas Instruments is a switching regulator with a 1A output current and 1100 kHz max switching frequency. It operates b/w -40 to 125°C, suitable for various applications requiring a compact design and efficient power management in the voltage range of 4-36V.
TPS54361DPRR
TPS54361DPRR by Texas Instruments is a switching regulator with a max output current of 3.5A and a max output voltage of 59V, suitable for industrial applications. It operates in current-mode control with a pulse width modulation technique, offering a wide input voltage range from 4.5V to 60V and a compact package style ideal for space-constrained designs.
MC34063AP
MC34063AP by Texas Instruments is a switching regulator with 8 terminals, VOLTAGE-MODE control mode, and BUCK-BOOST switcher config. It operates b/w 0 to 70 °C with input voltage range of 3-40 V. Ideal for applications requiring a max output current of 1.5 A at up to 100 kHz switching frequency.
LM5001MAX/NOPB
LM5001MAX/NOPB by Texas Instruments is a switching regulator with max output voltage of 75V, operating temp range -40 to 125°C, and max output current of 1.2A. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and buck-boost switcher configuration.
LMR62014XMFE/NOPB
LMR62014XMFE/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating b/w -40 to 125 °C. It has a min output voltage of 3 V and max of 20 V, suitable for automotive applications due to its compact size and pulse width modulation control technique.
MC33063AP1G
Shenzhen Changyuntong Ic Design
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LMZ22005TZE/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Terminal Pitch: 1.27 mm; Terminal Finish: MATTE TIN; Qualification: Not Qualified;
LM2670S-ADJ/NOPB
LM2670S-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output of 37V and 3A current. Operating b/w -40 to 125°C, it's ideal for automotive applications due to its small outline package and pulse width modulation control technique. With a wide input range of 6.5-40V, this buck switcher offers efficient power conversion up to 400kHz frequency.
TPS82085SILR
TPS82085SILR by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output current up to 3A. Ideal for automotive applications, it offers a max output voltage of 6V and switching frequency of 2800 kHz.
MC33063ADRJRG4
MC33063ADRJRG4 by Texas Instruments is a switching regulator with 1 function, operating at a max frequency of 100 kHz. It has a small outline package style and is suitable for industrial applications.
TPS5410DR
TPS5410DR by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max input voltage of 36V. It operates in buck configuration with pulse width modulation control technique, suitable for automotive applications due to its temperature grade. The package style is small outline, making it ideal for space-constrained designs.
TPS552882RPMR
TPS552882RPMR by Texas Instruments is a switching regulator with 26 terminals, operating temperature range of -40 to 125°C. It features a current-mode control mode, pulse width modulation technique, and buck-boost switcher configuration. Ideal for automotive applications due to its compact chip carrier package style and wide input voltage range of 2.7V to 36V.
TPS552882QRPMRQ1
TPS552882QRPMRQ1 by Texas Instruments is a switching regulator with a 12V nominal input voltage and a max output current of 6.35A. It is commonly used in automotive applications due to its AEC-Q100 screening level and temperature grade.
TPS62175DQCR
TPS62175DQCR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 28V. It is commonly used in industrial applications due to its temperature grade and small package size.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP5252MNTXG
NCP5252MNTXG by Onsemi is a 16-terminal chip carrier with voltage-mode control, operating b/w -40 to 85°C. It offers a max output current of 2A at a switching frequency of 1100 kHz, suitable for industrial applications requiring a compact and efficient buck switching regulator.
NCP5030MTTXG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5425DBR2G
DUAL SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5359ADR2G
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5911MNTBG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCP5203MNR2G
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 18; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5173MNG
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5209MNR2
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5210MN
DUAL SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5010FCT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VFBGA; Package Shape: SQUARE; Surface Mount: YES;
NCP5080MUTXG
BATTERY CHARGE CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCP5173MNR2G
NCP5203MNR2
NCP5173MN
NCP5209MN
NCP5050MTTXG
NCP5050MTTXG by Onsemi is a 10-terminal switching regulator with max output current of 3A and max switching frequency of 1950kHz. It operates b/w -10°C to 85°C, suitable for boost applications in compact designs requiring high efficiency and precise current-mode control.
NCP5201MN
NCP5162D
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5201MNG
DUAL SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 18; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP5173MNR2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved