Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP51145MWTAG by Onsemi is a DDR termination regulator with 8 terminals in a small outline package. It offers a max load regulation of 0.004% and operates b/w -40 °C to 85°C. Ideal for applications requiring precise voltage regulation in compact spaces.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
Corphita
Corohmni
UHIMA Technologies
The use of plastic/epoxy material in the package body makes the regulator lightweight and durable, ensuring a longer lifespan for the product.
Surface mount capability makes it easy to integrate this regulator into various electronic circuits, saving space and allowing for efficient PCB design.
The square package shape allows for easy placement and orientation during assembly, simplifying the manufacturing process for electronic devices.
The absence of leads simplifies the connection process and reduces the risk of soldering errors, ensuring a reliable and efficient electrical connection.
The TR packing method provides protection during transportation and storage, minimizing the risk of damage to the regulator before it is installed in the final product.
Having 8 terminals allows for multiple connection points, enabling the regulator to support various input and output configurations for different electronic applications.
With a high maximum operating temperature of 85 °C, this regulator can withstand and perform reliably in challenging thermal conditions, making it suitable for a wide range of environments.
The small terminal pitch of 0.5 mm enables high-density mounting, allowing for compact and space-efficient circuit designs.
The low minimum operating temperature of -40 °C ensures that the regulator remains operational even in extremely cold environments, increasing its versatility for different applications.
The DDR termination regulator type offers precise voltage regulation, ensuring stable power outputs for sensitive electronic components, making it ideal for use in critical systems.
The dual terminal position allows for flexibility in connecting the regulator in various orientations, accommodating different PCB layouts and design requirements.
With a maximum seated height of 1 mm, this regulator has a slim profile, making it suitable for compact electronic devices where space is limited.
The compact width of 2 mm enables efficient use of PCB space, facilitating the integration of the regulator into tight spaces within electronic assemblies.
The extremely low maximum load regulation of 0.004% ensures stable and accurate voltage output under varying load conditions, making this regulator highly reliable for precision applications.
The short length of 2 mm contributes to the overall compactness of the regulator, allowing for easy placement and integration into space-constrained electronic devices.
Other Function Regulators NCP51145MWTAG attributes and parameters. Explore more Other Function Regulators devices from Onsemi
JESD-30 Code:
Length:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
NCP51145MWTAG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
World Products
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
IP338K
Seagate Microelectronics
Other Regulators;
LM137H
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Form: WIRE; Maximum Load Regulation (%): 1 %; JESD-30 Code: O-MBCY-W3; Terminal Position: BOTTOM;
LM340AT5.0
Motorola
LM340AT5.0 by Motorola is a 3-terminal fixed voltage regulator with a nominal output of 5V and max output current of 1.5A. Operating b/w -40 to 125°C, it offers low line and load regulation making it ideal for applications requiring stable power supply such as industrial automation systems.
UA79M20MLA
UA79M20MLA by Texas Instruments is a BIPOLAR regulator with -20V output voltage, 0.5A output current, and 150°C max operating temperature. It is used in applications requiring precise voltage regulation in harsh environments due to its metal package body material and wide temperature range from -55°C to 150°C.
LM340MP-5.0
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Maximum Line Regulation: .05 %; Minimum Operating Temperature: -55 Cel;
LM305AP1
LM305AP1 by Texas Instruments is an adjustable bipolar regulator with a min output voltage of 4.5V and max output voltage of 40V. It has 8 terminals in a rectangular package, suitable for various applications requiring precise voltage regulation within a temperature range of 0-70°C.
MIC5166YML-TR
Micrel
DDR TERMINATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; No. of Functions: 1; Peak Reflow Temperature (C): 260;
UA78M24MJG
UA78M24MJG by Texas Instruments is a ceramic packaged bipolar regulator with an output voltage of 24V and load regulation of 0.24%. It operates in temperatures ranging from -55°C to 150°C, making it suitable for industrial applications requiring stable power supply. With through-hole terminals and fixed adjustability, it offers reliable performance in various electronic systems.
UA78M20MLA/883B
UA78M20MLA/883B by Texas Instruments is a BIPOLAR regulator with 20V output voltage, 5% voltage tolerance, and 0.2% load regulation. It operates in temperatures ranging from -55 to 150 °C and is MIL-STD-883 Class B screened. Ideal for applications requiring precise voltage regulation in harsh environments.
TL782KC
TL782KC by Texas Instruments is a bipolar fixed regulator with 3 terminals and a max output current of 1.5A. It has a nominal output voltage of 2V, dropout voltage of 2.6V, and can handle input voltages up to 40V. This regulator is ideal for applications requiring precise voltage regulation in electronic circuits.
UA7810CKC1
UA7810CKC1 by Texas Instruments is a fixed voltage regulator with an output of 10V and max load regulation of 0.2%. Operating temperature ranges from 0 to 125°C, making it suitable for various applications in electronics requiring stable power supply. With a package body material of PLASTIC/EPOXY, this bipolar technology regulator has 3 terminals and a terminal pitch of 2.54mm.
UA78M06MLA/883B
UA78M06MLA/883B by Texas Instruments is a BIPOLAR regulator with 6V output voltage, 0.5A output current, and 5% voltage tolerance. It operates in temperatures ranging from -55 to 150 °C and is MIL-STD-883 Class B screened. Ideal for applications requiring stable power supply in harsh environments.
UA7905CKC3
UA7905CKC3 by Texas Instruments is a fixed voltage regulator with an output of -5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable power supply such as industrial automation and automotive electronics. The device features a plastic/epoxy package body material, bipolar technology, and offers excellent line and load regulation within ±0.1%.
ZR78L05G
Diodes Incorporated
Diodes Inc.'s ZR78L05G is a 5V fixed voltage regulator with 3 terminals, suitable for surface mount applications. It offers a max output current of 0.2A and operates within a wide temperature range (-55 to 125°C). With excellent line and load regulation, it's ideal for various electronic devices requiring stable power supply.
MIC5504-3.3YMTTZ
Other Regulators; No. of Terminals: 4; Package Code: SON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
LP2996LQ/NOPB
LP2996LQ/NOPB by Texas Instruments is a DDR termination regulator with 1.5A max output current and 0.9V min output voltage. It comes in a square chip carrier package suitable for surface mount applications, making it ideal for power management in electronic devices.
LM2937ET-15/NOPB
National Semiconductor
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %; Terminal Pitch: 2.54 mm; Package Equivalence Code: SIP3,.1TB;
TLV1117IKTPR.
LP2996MX
LP2996MX by Texas Instruments is a DDR termination regulator with 8 terminals in a small outline package. It operates b/w 0-125°C, with Gull Wing terminals on a rectangular body. Ideal for applications requiring precise voltage regulation in compact spaces.
MC1466L
MC1466L by Motorola is a ceramic bipolar regulator with 14 terminals in an in-line package. It has an adjustable output, operating b/w 0-70°C. Ideal for applications requiring precise voltage regulation and thermal stability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP51200MNTXG
NCP51200MNTXG by Onsemi is a DDR termination regulator with a max operating temperature of 125°C and a min operating temperature of -40°C. It is used in applications such as small outline, heat sink/slug, very thin profile packages with 10 terminals.
NCP51199PDR2G
NCP51199PDR2G by Onsemi is a DDR termination regulator with 8 terminals in a small outline package. It has a max load regulation of 0.01% and operates b/w -40 to 85°C. Ideal for applications requiring precise voltage regulation in compact spaces.
NCP51403MNTXG
NCP51403MNTXG by Onsemi is a DDR termination regulator with a max operating temperature of 125°C and min operating temperature of -40°C. It comes in a small outline package style with very thin profile, suitable for surface mount applications. With 10 terminals and square package shape, it is ideal for compact electronic devices.
NCP51145PDR2G
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HSOP; Terminal Form: GULL WING; Packing Method: TR; JESD-30 Code: R-PDSO-G8;
NCP51401MNTXG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Width: 3 mm; Package Equivalence Code: SOLCC10,.11,20;
NCP51400MNTXG
NCP51400MNTXG by Onsemi is a DDR termination regulator with 10 terminals in a small outline package. It operates b/w -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation. The surface-mount design and very thin profile make it ideal for space-constrained electronic devices.
NCP51510MNTWG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: S-PDSO-N10;
NCP51510MNTAG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Package Body Material: PLASTIC/EPOXY; Package Shape: SQUARE;
NCP5208DR2G
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
NCP552SQ15T1G
Other Regulators; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 3 %; Qualification Status: Not Qualified; Minimum Operating Temperature: -40 Cel; Peak Reflow Temperature (C): 260;
NCP552SQ18T1G
Other Regulators; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 3 %; Maximum Output Current-1: .08 A; Technology: CMOS; Package Body Material: PLASTIC/EPOXY;
NCP5208DR2
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Package Equivalence Code: SOP8,.25; Width: 3.9 mm;
NCP51200MNTWG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Width: 3 mm; Minimum Operating Temperature: -40 Cel;
NCP51190MNTAG
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; JESD-30 Code: S-PDSO-N8; Maximum Seated Height: 1 mm;
NCP51198PDR2G
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HSOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Terminal Pitch: 1.27 mm;
NCP552SQ25T1G
Other Regulators; No. of Terminals: 4; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 3 %; Peak Reflow Temperature (C): 260; No. of Outputs: 1;
NCP51145MNTAG
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Width: 2 mm; No. of Outputs: 1;
NCP51402MNTXG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Packing Method: TR; Terminal Pitch: .5 mm;
NCP51200AMNTXG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; No. of Outputs: 1; Width: 3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved