Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP552SQ15T1G by Onsemi is a CMOS regulator with 1.5V output voltage, 3% voltage tolerance, and 0.08A output current. It operates b/w -40 to 85 °C and can handle up to 12V input. This plastic/epoxy-packaged device is ideal for applications requiring fixed voltage regulation in various electronic systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Problanco Electronics
Kulean Microsystems
TANS Electronics
SupplyDigital Components
UHIMA Technologies
Corphita
Corohmni
The use of plastic/epoxy as the package body material makes the regulator lightweight and durable, making it suitable for a variety of applications.
CMOS technology ensures low power consumption and efficient operation, making this regulator energy-efficient and reliable.
TR packing method provides easy handling and assembly, making it convenient for installation in different electronic devices.
The 3% maximum voltage tolerance ensures stable and accurate output voltage, offering consistent performance in varying input conditions.
The fixed nominal output voltage of 1.5V makes this regulator suitable for specific applications requiring a constant voltage supply.
With fixed adjustability, this regulator offers a set output voltage without the need for adjustments, simplifying the design and use in electronic circuits.
The high maximum operating temperature of 85 °C ensures reliable performance even in demanding environmental conditions, increasing the regulator's versatility.
The low minimum operating temperature of -40 °C allows the regulator to function in cold environments without compromising its efficiency.
The TIN terminal finish provides good conductivity, ensuring stable connections and efficient power delivery in electronic circuits.
The maximum output current of 0.08A allows the regulator to deliver sufficient power to connected devices, making it suitable for a wide range of applications.
With a maximum time of 30 seconds at peak reflow temperature, this regulator allows for quick and effective soldering during assembly, saving time and effort.
The peak reflow temperature of 260 °C supports reliable soldering processes, ensuring strong and durable connections in electronic circuits.
The maximum absolute input voltage of 12V provides sufficient margin for protection against voltage surges, safeguarding the regulator and connected devices from potential damage.
Other Function Regulators NCP552SQ15T1G attributes and parameters. Explore more Other Function Regulators devices from Onsemi
Adjustability:
Maximum Input Voltage Absolute:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Outputs:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Nominal Output Voltage-1:
Package Body Material:
Package Equivalence Code:
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Sub-Category:
Technology:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
NCP552SQ15T1G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Surge Components
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
Multicomp Pro
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
LP2996AMRE/NOPB
LP2996AMRE/NOPB by Texas Instruments is a DDR termination regulator with 1.5A max output current and 5.5V max input voltage. It comes in a small outline package with gull wing terminals, suitable for surface mount applications in various electronic devices.
TPS7325QDP
TPS7325QDP by Texas Instruments is a BICMOS regulator with 2.5V output voltage, 0.5A max current, and 3% voltage tolerance. It operates b/w -40 to 125°C, ideal for applications requiring precise voltage regulation in various electronic devices.
LM105H/883C
Other Regulators; No. of Terminals: 8; Terminal Form: WIRE; Package Equivalence Code: CAN8,.2; Technology: BIPOLAR; Screening Level: MIL-STD-883 Class C;
TL580CP
TL580CP by Texas Instruments is a bipolar technology regulator with adjustable output voltage ranging from 2.5V to 24V. With a package style of in-line and through-hole terminal form, it is ideal for applications requiring precise voltage regulation in temperature-sensitive environments up to 70°C.
SN0211070DBVT
SN0211070DBVT by Texas Instruments is a CMOS regulator with 5 terminals and adjustable output voltage from 1.6V to 9.5V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices. The package style is small outline, thin profile, ideal for space-constrained designs that require efficient power management solutions.
AMS1117-1.5
Advanced Monolithic Systems
Other Regulators;
TPS51100DGQR
TPS51100DGQR by Texas Instruments is a DDR termination regulator with 3A max output current. It operates b/w -40 to 85°C, suitable for various applications requiring a min output voltage of 0.6V in a compact square package.
UA78M10MJG
UA78M10MJG by Texas Instruments is a 10V fixed voltage regulator with 0.5A output current and 2.5V dropout voltage, ideal for applications requiring stable power supply. With a max input voltage of 35V and operating temperature range from -55 to 150°C, it ensures reliable performance in various environments. Featuring ceramic package material and through-hole terminals, this bipolar technology regulator offers precise regulation with low line/load variations.
LP2951CN3.0
Motorola
LP2951CN3.0 by Motorola is a bipolar regulator with 8 terminals and a package style of IN-LINE. It has an operating temperature range from -40 to 125 °C and offers a fixed/adaptable adjustability feature. With a max output voltage of 29V, it is suitable for applications requiring precise voltage regulation in various electronic devices.
MC78L15ACP
Boca Semiconductor
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Maximum Output Current-1: .1 A; Terminal Position: SINGLE;
UA78L12ACLPP3
UA78L12ACLPP3 by Texas Instruments is a 12V fixed voltage regulator with 0.1A output current and 2.6V dropout voltage, suitable for applications requiring stable power supply. It features a max input voltage of 35V, operating temperature range from 0 to 125°C, and high load regulation of only 0.1%. Ideal for electronic devices needing precise voltage regulation in various environments.
LP38690SD-ADJ/NOPB
National Semiconductor
Other Regulators; No. of Terminals: 6; Package Code: SON; Terminal Form: NO LEAD; Package Equivalence Code: SOLCC6,.13,38; Package Shape: RECTANGULAR;
SN0211072DBVT
Texas Instruments' SN0211072DBVT is a CMOS regulator with 3.8V output voltage, 0.15A max current, and 1V dropout voltage. Ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package and surface mount capability. Operating temperature range from -40°C to 125°C makes it suitable for various environments.
SN72723L
The Texas Instruments SN72723L is a bipolar technology regulator with adjustable output voltage ranging from 2V to 37V. Featuring a cylindrical package style, it has 10 terminals and operates b/w 0°C to 70°C. Ideal for applications requiring precise voltage regulation in various electronic devices.
TS78L15CT
Taiwan Semiconductor
TS78L15CT by Taiwan Semiconductor is a fixed 15V regulator with 0-125°C operating range. It offers 5% voltage tolerance, 0.3% line regulation, and 0.15% load regulation. Ideal for applications requiring stable power supply in various electronic devices.
LM7805
Unisonic Technologies
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Pitch: 2.54 mm; Operating Temperature (TJ-Min): 0 Cel;
UA7815CKCP3
UA7815CKCP3 by Texas Instruments is a fixed 15V bipolar regulator with 3 terminals. It offers a max voltage tolerance of 5% and max load regulation of 0.3%. This device, made from plastic/epoxy, operates at temperatures up to 125°C and is commonly used in various electronic applications.
TPS73250MDCQREP
TPS73250MDCQREP by Texas Instruments is a BICMOS technology regulator with 5 terminals and a fixed output voltage of 5V. It has a max output current of 0.25A, voltage tolerance of 1%, and dropout voltage of 0.04V, making it ideal for applications requiring precise power regulation in compact electronic devices.
LM105JG/883B
LM105JG/883B by Texas Instruments is a MIL-STD-883 Class B (Modified) rated bipolar regulator with adjustable output voltage from 4.5V to 40V. Featuring through-hole terminals and ceramic package, it operates b/w -55°C to 125°C making it ideal for rugged applications in harsh environments.
L7805CT
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Maximum Output Current-1: 1.5 A; Terminal Finish: Tin/Lead (Sn/Pb);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP51200MNTXG
NCP51200MNTXG by Onsemi is a DDR termination regulator with a max operating temperature of 125°C and a min operating temperature of -40°C. It is used in applications such as small outline, heat sink/slug, very thin profile packages with 10 terminals.
NCP51199PDR2G
NCP51199PDR2G by Onsemi is a DDR termination regulator with 8 terminals in a small outline package. It has a max load regulation of 0.01% and operates b/w -40 to 85°C. Ideal for applications requiring precise voltage regulation in compact spaces.
NCP51403MNTXG
NCP51403MNTXG by Onsemi is a DDR termination regulator with a max operating temperature of 125°C and min operating temperature of -40°C. It comes in a small outline package style with very thin profile, suitable for surface mount applications. With 10 terminals and square package shape, it is ideal for compact electronic devices.
NCP51145PDR2G
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HSOP; Terminal Form: GULL WING; Packing Method: TR; JESD-30 Code: R-PDSO-G8;
NCP51401MNTXG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Width: 3 mm; Package Equivalence Code: SOLCC10,.11,20;
NCP51400MNTXG
NCP51400MNTXG by Onsemi is a DDR termination regulator with 10 terminals in a small outline package. It operates b/w -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation. The surface-mount design and very thin profile make it ideal for space-constrained electronic devices.
NCP51510MNTWG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: S-PDSO-N10;
NCP51510MNTAG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Package Body Material: PLASTIC/EPOXY; Package Shape: SQUARE;
NCP5208DR2G
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
NCP552SQ18T1G
Other Regulators; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 3 %; Maximum Output Current-1: .08 A; Technology: CMOS; Package Body Material: PLASTIC/EPOXY;
NCP5208DR2
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Package Equivalence Code: SOP8,.25; Width: 3.9 mm;
NCP51200MNTWG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Width: 3 mm; Minimum Operating Temperature: -40 Cel;
NCP51190MNTAG
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; JESD-30 Code: S-PDSO-N8; Maximum Seated Height: 1 mm;
NCP51145MWTAG
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel;
NCP51198PDR2G
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HSOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Terminal Pitch: 1.27 mm;
NCP552SQ25T1G
Other Regulators; No. of Terminals: 4; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 3 %; Peak Reflow Temperature (C): 260; No. of Outputs: 1;
NCP51145MNTAG
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Width: 2 mm; No. of Outputs: 1;
NCP51402MNTXG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Packing Method: TR; Terminal Pitch: .5 mm;
NCP51200AMNTXG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; No. of Outputs: 1; Width: 3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved