Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP3335ADM180R2G by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 1.8V nominal output voltage, 0.34V max dropout voltage, and 0.5A max output current per channel. It is ideal for applications requiring stable power supply in compact spaces, such as IoT devices and portable electronics.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Bristol Electronics
Digiode
Vigor
$1.190
AZTECH Wire
$8.020
SupplyDigital Components
Kulean Microsystems
Perfect Parts
Corphita
Problanco Electronics
TANS Electronics
Corohmni
UHIMA Technologies
Microchip USA
The use of plastic/epoxy material ensures durability and lightweight design.
This low dropout voltage helps in maintaining a constant output voltage even when the input voltage fluctuates.
The low dropout voltage of 1.34V ensures efficient power regulation with minimal energy loss.
Being surface mountable makes installation easier and saves space on the PCB.
Wide operating temperature range makes this regulator suitable for various environments and applications.
Fixed Regulators - Positive Multiple Output LDO NCP3335ADM180R2G attributes and parameters. Explore more Fixed Regulators - Positive Multiple Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Dropout Voltage-2:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Current-2:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Maximum Output Voltage-2:
Minimum Output Voltage-2:
Nominal Output Voltage-2:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCP3335ADM180R2G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 08/Jul/2021
PCN Design/Specification - Case Outline Rev 12/Aug/2020 Copper Wire Bond 08/May/2013
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Continental Device India
LM9072T
LM9072T by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max input voltage of 27V and can deliver up to 0.35A on one output and 0.08A on the other. With a package style of flange mount, it is suitable for applications requiring stable voltage regulation in various electronic devices.
TPS71918-12DRVT
TPS71918-12DRVT by Texas Instruments is a BICMOS technology-based LDO regulator with 2 outputs. It has a max dropout voltage of 0.4 V, operating temperature range from -40 to 125 °C, and can handle up to 0.2 A output current per channel. Ideal for applications requiring fixed positive multiple output voltage regulation in compact spaces.
LD3986J30R-E
LD3986J30R-E by STMicroelectronics is a fixed positive multiple output LDO regulator with a max dropout voltage of 0.1V and operates b/w -40 °C to 125°C. It features two outputs, each delivering up to 150mA at 3V. Ideal for compact electronic devices requiring stable power supply.
TPS2148IDGNR
TPS2148IDGNR by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.35 V, operating temperature range from -40 to 100°C, and a package style of Small Outline Heat Sink. Ideal for applications requiring stable voltage regulation in compact electronic devices.
MAX8531EBTGG+T
Analog Devices
Analog Devices' MAX8531EBTGG+T is a BICMOS technology-based LDO regulator with 2 outputs. It offers fixed output voltages of 3V and max dropout voltage of 0.2V, suitable for applications requiring precise power regulation in compact electronic devices.
CS8281YDP5
CS8281YDP5 by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 5V nominal output voltage. It has 0.6V max dropout voltage, suitable for applications requiring stable power supply in compact spaces. With surface mount capability and small outline package style, it is ideal for electronic devices with limited space constraints.
LP3996SDX-2533/NOPB
LP3996SDX-2533/NOPB by Texas Instruments is a fixed positive multiple output LDO regulator with 2.5V and 3.3V nominal output voltages, ideal for applications requiring low dropout voltages of 0.22V and 0.55V. It features a small outline package style, surface mount capability, and dual terminal position for compact designs in various electronic devices.
TPS71933-33DRVT
TPS71933-33DRVT by Texas Instruments is a fixed positive multiple output LDO regulator with 3.3V nominal output voltage and 0.4V max dropout voltage. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable power supply with low dropout voltage and high efficiency.
LP2966MM3333EP
LP2966MM3333EP by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Nominal Output Voltage of 3.3V and Max Dropout Voltage of 0.27V, suitable for applications requiring stable power supply in compact electronic devices. The package style is Small Outline, Thin Profile, Shrink Pitch making it ideal for space-constrained designs.
TPS70258PWPRG4
TPS70258PWPRG4 by Texas Instruments is a PMOS technology-based LDO regulator with 2.5V and 3.3V output options, ideal for applications requiring fixed positive multiple outputs. It features a max dropout voltage of 0.275V, operating temperature range from -40°C to 125°C, and can handle up to 0.5A output current.
LP3996SD-3308
LP3996SD-3308 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3.3V and 0.8V outputs, max dropout voltages of 0.55V and 0.22V, suitable for applications requiring low dropout voltage and multiple output regulation in compact designs.
LP5996SD-2828/NOPB
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3.75 %;
LP5996SDX-1018/NOPB
LP5996SDX-1018/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.55V and 0.22V, suitable for applications requiring stable voltage regulation in compact spaces. Operating temperature ranges from -40°C to 125°C make it versatile for various electronic devices.
LP2967IBP-2528
LP2967IBP-2528 by Texas Instruments is a fixed positive multiple output LDO regulator with 2.5V and 2.8V nominal output voltages, suitable for applications requiring a max input voltage of 16V. It features a very thin profile package style with a grid array shape and ball terminal form, making it ideal for compact designs in various electronic devices. Operating within a wide temperature range from -40 to 125°C, this regulator offers stable performance with low dropout voltages of 0.425V for both outputs.
NCP151AAMX180075TCG
NCP151AAMX180075TCG by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.56V and operates in temperatures ranging from -40 to 85°C. This regulator, suitable for various applications, comes in a small outline package with no lead terminals.
TLV7111233DSET
TLV7111233DSET by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Nominal Output Voltage of 1.2 V and 3.3 V, with Max Dropout Voltage of 0.2 V. Ideal for applications requiring stable voltage regulation in compact electronic devices.
ADP220ACBZ-2827R7
Analog Devices' ADP220ACBZ-2827R7 is a PMOS technology-based LDO regulator with 2 outputs. It offers fixed output voltages of 2.8V and 2.7V, with max dropout voltage of 0.23V. Suitable for applications requiring precise voltage regulation in compact spaces due to its very thin profile grid array package style.
LP3986TL-2525/NOPB
LP3986TL-2525/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.5V nominal output voltage and 0.1V max dropout voltage. It has two outputs, can handle up to 0.3A current, and operates in temperatures ranging from -40°C to 125°C. Ideal for applications requiring precise voltage regulation in compact spaces.
SCY99250CFCT195215T2G
SCY99250CFCT195215T2G by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a min input voltage of 2.45V and max output current of 0.2A per output. This regulator, in a grid array package style, is suitable for applications requiring precise voltage regulation in compact spaces.
5962-0722501VSC
Texas Instruments' 5962-0722501VSC is a CMOS technology-based LDO regulator with dual outputs. It offers fixed output voltages of 3.3V and 2.5V, with max currents of 1A and 2A respectively. Ideal for applications requiring precise voltage regulation in harsh environments due to MIL-PRF-38535 Class V screening level.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT1965IMS8E-1.8#TRPBF
NCP3335ADM330R2G
NCP3335ADM330R2G by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 3.3V nominal output voltage, 0.34V max dropout voltage, and 1.5% voltage tolerance. Ideal for applications requiring stable power supply in compact spaces, such as portable electronics and IoT devices.
NCP3335AMN330R2G
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 1.5 %;
NCP3335ADM250R2G
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 1.5 %;
NCP3335ADM150R2G
NCP3335ADM280R2G
NCP3335ADM285R2G
NCP3335ADM300R2G
NCP3335ADM500R2G
NCP3335AMN150R2G
NCP3335AMN180R2G
NCP3335AMN250R2G
NCP3335AMN280R2G
NCP3335AMN285R2G
NCP3335AMN300R2G
NCP3335AMN500R2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved