Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP1937C1DR2G by Onsemi is a current-mode switching regulator with 12V nominal voltage, 17 terminals, and automotive temperature grade. It features resonant control technique, matte tin terminal finish, and small outline package style. Ideal for power factor control applications in automotive electronics due to its compact size and efficient performance.
Median Price
$0.987
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.951
1k+ parts
$0.789
10k+ parts
$0.704
DigiKey
$1.190
Verical
$0.879
Digiode
$0.842
Vyrian
Vigor
$0.780
Corphita
$0.797
Corohmni
$0.930
AZTECH Wire
$17.490
Continental Prestige Electronics
$0.870
TANS Electronics
Problanco Electronics
Microchip USA
SupplyDigital Components
Kulean Microsystems
UHIMA Technologies
This material offers good insulation properties, ensuring safety and reliability in various operating conditions.
This specific voltage requirement makes it compatible with a wide range of applications requiring a 12V power supply.
Current-mode control provides excellent transient response and stability, making the product efficient in regulating output voltage.
Being automotive grade ensures that the product can withstand harsh operating conditions and temperature fluctuations commonly found in automotive applications.
Resonant control helps in reducing switching losses and electromagnetic interference, making the product more efficient and reliable.
Switching Regulators & Controllers NCP1937C1DR2G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCP1937C1DR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 8/Apr/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
Philips Semiconductors
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
Telcom Semiconductor
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM25011AQ1MYX/NOPB
LM25011AQ1MYX/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various automotive applications. With a compact square package style and surface-mount capability, it offers high efficiency with a max switching frequency of 2000 kHz.
LM2670S-ADJ/NOPB
LM2670S-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output of 37V and 3A current. Operating b/w -40 to 125°C, it's ideal for automotive applications due to its small outline package and pulse width modulation control technique. With a wide input range of 6.5-40V, this buck switcher offers efficient power conversion up to 400kHz frequency.
TPS62177DQCT
TPS62177DQCT by Texas Instruments is a switching regulator with a nominal input voltage of 12V and output voltage of 3.3V, suitable for industrial applications. It operates in buck configuration with a max output current of 0.5A and a max switching frequency of 1000kHz, making it ideal for compact designs requiring efficient power management.
TPS54620RGYR
TPS54620RGYR by Texas Instruments is a 6A BUCK switching regulator with 0.8V min output, 15V max output, and 1600kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and current-mode control technique.
LM27762DSSR
LM27762DSSR by Texas Instruments is a switching regulator with 2 outputs, max output current of 0.25A, and max switching frequency of 2200kHz. It operates in industrial temperature range and uses pulse frequency modulation for control. Ideal for applications requiring efficient power conversion in compact spaces.
TPS54335ADDAR
TPS54335ADDAR by Texas Instruments is a switching regulator with a max output current of 3A and a max switching frequency of 1500kHz. It is commonly used in industrial applications for voltage regulation with an input voltage range of 4.5V to 28V.
TPS62130RGTR
TPS62130RGTR by Texas Instruments is a 16-terminal switching regulator with a voltage-mode control technique. It operates b/w -40 to 85°C, supporting input voltages from 3-17V and output voltages up to 6V at a max current of 3A. Ideal for industrial applications requiring efficient power conversion in compact spaces.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33063AD
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS60403DBV
TPS60403DBV by Texas Instruments is a small outline, low profile switching regulator with 5 terminals. It operates at -40 to 85°C and has a max output current of 0.06A. Ideal for industrial applications requiring a min input voltage of 1.8V and max output voltage of -5.5V at a frequency of up to 300kHz.
LTM4607IV#PBF
Analog Devices
Analog Devices LTM4607IV#PBF is a 141-terminal switching regulator with 440 kHz max frequency, ideal for industrial applications. Features include 4.5-36V input range, 6V output voltage, and -40 to 85°C operating temp. Suitable for current-mode control in compact designs requiring high efficiency.
LM27313XMF/NOPB
LM27313XMF/NOPB by Texas Instruments is a switching regulator with a max output voltage of 28V and min input voltage of 2.7V. Operating b/w -40 to 125°C, it uses pulse width modulation for boost configuration in automotive applications. With a compact design and high switching frequency of 1900 kHz, it's ideal for space-constrained environments.
TPS62097RWKR
TPS62097RWKR by Texas Instruments is a switching regulator with 2A output current, 2500kHz max switching frequency, and 3.6V nominal input voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact chip carrier package style.
LM5118MH/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2674M-ADJ/NOPB
MPQ2918GL-AEC1-Z
Monolithic Power Systems
MPQ2918GL-AEC1-Z by Monolithic Power Systems is a 20-terminal switching controller with current-mode control, operating b/w -40 to 125 °C. It features a max output voltage of 25 V and supports pulse width modulation with a max switching frequency of 1000 kHz. Ideal for automotive applications due to AEC-Q100 screening level and small outline package style.
LT8609SEV#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HQCCN; Package Shape: SQUARE; Surface Mount: YES;
LM5118MHX/NOPB
LM5118MHX/NOPB by Texas Instruments is a current-mode switching controller with a max output voltage of 70V and max output current of 10A. Operating b/w -40 to 125°C, it's ideal for automotive applications due to its buck-boost switcher configuration and pulse width modulation control technique. This small outline IC has a package style with heat sink, making it suitable for compact designs requiring high efficiency.
LM2576T-ADJ
Semtech
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS62740DSSR
TPS62740DSSR by Texas Instruments is a switching regulator with 12 terminals, operating b/w -40 to 85°C. It offers output voltage range of 1.8-3.3V and current up to 0.3A, suitable for industrial applications requiring efficient power management in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP1595AMNR2G
NCP1595AMNR2G by Onsemi is a current-mode switching regulator with max output current of 6.1A and max switching frequency of 1130kHz. It operates b/w -40 to 85°C, ideal for industrial applications requiring efficient power management in compact spaces. The IC features pulse width modulation control technique and buck switcher configuration, making it suitable for various electronic devices.
NCP1403SNT1G
NCP1403SNT1G by Onsemi is a voltage-mode switching regulator with a max output current of 0.6A and a boost switcher configuration. Operating temperature ranges from -40 to 85°C, making it suitable for industrial applications. This small outline IC has 5 terminals, matte tin finish, and supports a max input voltage of 5.5V at a frequency of up to 300kHz.
NCP1521BSNT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP1406SNT1G
NCP1406SNT1G by Onsemi is a switching regulator with current-mode control, operating b/w -40 to 85°C. It has a boost configuration, supporting input voltages from 1.4V to 5.5V and output currents up to 25mA. Ideal for industrial applications requiring high-frequency pulse modulation in a compact SOT-23 package.
NCP1597AMNTWG
NCP1597AMNTWG by Onsemi is a current-mode switching regulator with a max operating temp of 85°C and freq of 1130 kHz. Its small outline package makes it ideal for industrial applications requiring high efficiency power management in compact spaces. With surface mount capability and dual terminals, it offers reliable performance in harsh environments.
NCP1593BMNTWG
NCP1593BMNTWG by Onsemi is a current-mode switching regulator with a max output current of 5.5A and a max switching frequency of 1130kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces. The package style is small outline with very thin profile, ideal for space-constrained designs.
NCP1729SN35T1G
NCP1729SN35T1G by Onsemi is a small outline, thin profile switching regulator with a max output current of 0.025A and a max operating temperature of 85°C. Ideal for industrial applications requiring a switched capacitor converter with input voltage ranging from 1.15V to 6V.
NCP1529MUTBG
NCP1529MUTBG by Onsemi is a current-mode switching regulator with max output current of 1A and max switching frequency of 2200 kHz. It operates in industrial temperature range, suitable for buck applications with input voltage ranging from 2.7V to 5.5V.
NCP1207ADR2G
NCP1207ADR2G by Onsemi is a switching controller with a max output current of 0.5A and a max switching frequency of 200kHz. It operates in automotive temperature grades and uses pulse width modulation control technique, making it ideal for automotive applications requiring efficient power management.
NCP1593AMNTWG
NCP1593AMNTWG by Onsemi is a current-mode switching regulator with max output current of 5.5A and max switching frequency of 1130kHz. Ideal for industrial applications, it operates b/w -40 to 85°C, has a small outline package style, and supports pulse width modulation control technique.
NCP1034DR2G
NCP1034DR2G by Onsemi is a switching controller with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures (-40 to 125 °C) and features hysteric current mode control technique. Ideal for applications requiring high efficiency and compact design, such as automotive electronics or industrial automation systems.
NCP1397ADR2G
SWITCHING CONTROLLER; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Input Voltage: 20 V;
NCP1395BDR2G
NCP1395BDR2G by Onsemi is a small outline switching controller with current-mode control technique, operating at a max frequency of 1MHz. It has a wide input voltage range from 8.3V to 20V, making it suitable for various applications requiring efficient power management in compact designs. The push-pull switcher configuration and resonant control make it ideal for high-frequency power conversion needs.
NCP1532MUAATXG
NCP1532MUAATXG by Onsemi is a dual switching controller with a max output current of 0.6A and a max switching frequency of 2700 kHz. It operates in an industrial temperature grade range from -40 to 85°C, making it suitable for various applications requiring precise current-mode control. The small outline package with a very thin profile and surface mount capability makes it ideal for space-constrained designs.
NCP1529ASNT1G
NCP1529ASNT1G by Onsemi is a current-mode switching regulator with 1A output, 2200kHz max frequency, and 3.6V nominal input voltage. Ideal for industrial applications requiring efficient power management in compact spaces. Features small outline package with dual terminals and pulse width modulation control technique.
NCP1397BDR2G
NCP1397BDR2G by Onsemi is a switching controller with 1A output current and 560kHz max switching frequency. It operates on 10.3-20V input voltage range, ideal for resonant control applications in compact designs. The small outline package with gull wing terminals makes it suitable for surface mount PCBs.
NCP1252ADR2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 550 kHz;
NCP1200D60R2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
NCP1423DMR2G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
NCP1597BMNTWG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved