Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP1200D60R2 by Onsemi is a current-mode switching controller with a max output current of 0.25A and a max switching frequency of 70kHz. It is ideal for applications requiring pulse width modulation control technique, such as small outline switching regulators in plastic/epoxy packages.
Median Price
$1.150
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Component Electronics Inc.
1+ parts
100+ parts
$0.870
1k+ parts
$0.750
10k+ parts
-
Chip Stock
Vyrian
Digiode
LIBRA Elektronik GmbH
Cyclops Electronics Ltd
A&K Electronics
Rotakorn
Bristol Electronics
Fibra_Brandt Electronic GMBH
Benley Electronics
$1.750
AZTECH Wire
$16.310
SupplyDigital Components
Problanco Electronics
A-Z Elektronik GmbH
Perfect Parts
Kulean Microsystems
Assy Fe
Vigor
TANS Electronics
Microchip USA
Corohmni
Corphita
UHIMA Technologies
Cyclops Electronics Ltd (Excess)
The use of plastic/epoxy material makes the product lightweight and durable, ideal for portable or rugged applications.
Surface mount capability makes the product easy to integrate onto PCBs, saving space and simplifying manufacturing processes.
Having 8 terminals allows for more flexibility in connecting the regulator/controller to other components, enabling versatile circuit designs.
Current-mode control provides better load regulation and improved transient response, leading to stable and efficient operation.
The maximum output current of 0.25 A ensures that the regulator/controller can handle a decent load, suitable for various electronic devices.
Switching Regulators & Controllers NCP1200D60R2 attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
NCP1200D60R2 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 03/Jan/2008
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
General Semiconductor
FDC5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
Weitron Technology
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
Hy Electronic
Philips Components
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1552200253
Molex
WIRE AND CABLE;
TPS40210DGQRG4
TPS40210DGQRG4 by Texas Instruments is a switching regulator with a package style of small outline, heat sink/slug, and thin profile. It operates b/w -40 to 125°C, with a min output voltage of 7V and max input voltage of 52V. Ideal for automotive applications due to its control mode (current-mode) and pulse width modulation technique.
TPS54140DGQR
TPS54140DGQR by Texas Instruments is a switching regulator with a max output current of 1.5A and max operating temp of 150°C. Ideal for automotive applications, it operates in buck configuration with PWM control mode and supports input voltages from 3.5V to 42V.
LM2678SX-ADJ/NOPB
LM2678SX-ADJ/NOPB by Texas Instruments is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and output voltage ranging from 1.23V to 37V. It is used in automotive applications for regulating voltage efficiently up to 5A with a max input voltage of 40V and PWM control technique at a frequency of up to 260kHz.
LM27761DSGT
LM27761DSGT by Texas Instruments is a small outline, heat sink package with 8 terminals. It operates at -40 to 85°C and supports input voltage from 2.7V to 5.5V, outputting up to -1.5V at 0.25A max current. Ideal for industrial applications requiring a switched capacitor inverter with pulse frequency modulation control technique.
MC33063ADRJR
MC33063ADRJR by Texas Instruments is a switching regulator with VOLTAGE-MODE control, operating at -40 to 85 °C. It has a max output voltage of 40V and can handle up to 1.5A output current. Ideal for industrial applications requiring efficient buck-boost configurations in compact designs.
MC33063ADR
MC33063ADR by Texas Instruments is a switching regulator with VOLTAGE-MODE control, operating b/w -40 to 85 °C. It has a max output voltage of 40V and can handle up to 1.5A output current. Ideal for industrial applications requiring efficient power conversion in a compact SMALL OUTLINE package.
LMZ31707RVQT
LMZ31707RVQT by Texas Instruments is a switching regulator with max output current of 7A, max input voltage of 17V, and max operating temp of 85°C. Ideal for industrial applications requiring efficient power management in compact spaces.
LM2576T-ADJ
LM2576T-ADJ by Texas Instruments is a switching regulator with max output voltage of 37V and max output current of 7.5A. It operates b/w -40 to 125°C, suitable for automotive applications. Control mode is voltage-mode PWM with a switching frequency of up to 63kHz, ideal for buck configuration.
LM2675MX-ADJ
LM2675MX-ADJ by Texas Instruments is a voltage-mode switching regulator with a max output current of 2.2A and a max switching frequency of 275kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, with a nominal input voltage of 12V and nominal output voltage of 1.21V.
LMZ14202HTZE/NOPB
LMZ14202HTZE/NOPB by Texas Instruments is a switching regulator with 2A output current, 5-24V output voltage range, and VOLTAGE-MODE control mode. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. Features include small outline package, single terminal position, and buck-boost switcher configuration.
TPS63020DSJT
TPS63020DSJT by Texas Instruments is a switching regulator with 14 terminals, operating temperature range of -40 to 85°C, and output current up to 4.5A. Ideal for industrial applications requiring a compact design, it supports input voltages from 1.8V to 5.5V and offers pulse width modulation control for efficient power management at frequencies up to 2600kHz.
LM25011MY/NOPB
LM25011MY/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage, 2A max output current, and 2000 kHz max switching frequency. It is ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package design.
LTM8055IY#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 121; Package Code: BGA; Package Shape: SQUARE; Surface Mount: YES;
LTM8055MPY#PBF
Analog Devices
Analog Devices LTM8055MPY#PBF is a switching regulator with 121 terminals, operating b/w -55 to 125°C. It uses current-mode control and pulse width modulation technique for buck-boost configuration. Ideal for military applications due to its robust design and wide input voltage range of 5-36V.
EN5322QI-T
Intel
EN5322QI-T by Intel is a voltage-mode switching regulator with 24 terminals, operating b/w -40 to 85°C. It has a max output current of 2A and operates at a frequency of up to 4MHz. Ideal for industrial applications requiring efficient power management in compact spaces.
MC33063AD
MC33063AD by Texas Instruments is a voltage-mode switching regulator with 5V nominal input and output voltages up to 40V. It operates in industrial temperature range (-40°C to 85°C) with a max output current of 1.5A, making it suitable for various power supply applications. The IC features pulse width modulation control technique and buck-boost switcher configuration in a small outline package.
LMZM23601V5SILR
LMZM23601V5SILR by Texas Instruments is a switching regulator with 1A output current, 1100kHz max switching frequency, and 5V nominal output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact rectangular package style. Suitable for various power management needs in automotive electronics.
TPS560430XFDBVT
TPS560430XFDBVT by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 24V and current of 0.6A, suitable for automotive applications due to its compact size (2.9mm x 1.6mm) and pulse width modulation control technique at a high switching frequency of 2100kHz.
LT8640EUDC#PBF
Analog Devices' LT8640EUDC#PBF is a 12.5A switching regulator with a buck configuration, operating at up to 2150 kHz. It features a wide input voltage range of 3.4V to 42V and offers pulse width modulation control for automotive applications requiring high efficiency and precise current regulation.
LMZ23603TZX/NOPB
LMZ23603TZX/NOPB by Texas Instruments is a switching regulator with 3A output current, 950 kHz max switching frequency, and 85°C max operating temp. Ideal for industrial applications requiring a compact design and efficient power management in the voltage range of 6V to 36V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP1595AMNR2G
NCP1595AMNR2G by Onsemi is a current-mode switching regulator with max output current of 6.1A and max switching frequency of 1130kHz. It operates b/w -40 to 85°C, ideal for industrial applications requiring efficient power management in compact spaces. The IC features pulse width modulation control technique and buck switcher configuration, making it suitable for various electronic devices.
NCP1403SNT1G
NCP1403SNT1G by Onsemi is a voltage-mode switching regulator with a max output current of 0.6A and a boost switcher configuration. Operating temperature ranges from -40 to 85°C, making it suitable for industrial applications. This small outline IC has 5 terminals, matte tin finish, and supports a max input voltage of 5.5V at a frequency of up to 300kHz.
NCP1521BSNT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP1406SNT1G
NCP1406SNT1G by Onsemi is a switching regulator with current-mode control, operating b/w -40 to 85°C. It has a boost configuration, supporting input voltages from 1.4V to 5.5V and output currents up to 25mA. Ideal for industrial applications requiring high-frequency pulse modulation in a compact SOT-23 package.
NCP1597AMNTWG
NCP1597AMNTWG by Onsemi is a current-mode switching regulator with a max operating temp of 85°C and freq of 1130 kHz. Its small outline package makes it ideal for industrial applications requiring high efficiency power management in compact spaces. With surface mount capability and dual terminals, it offers reliable performance in harsh environments.
NCP1593BMNTWG
NCP1593BMNTWG by Onsemi is a current-mode switching regulator with a max output current of 5.5A and a max switching frequency of 1130kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces. The package style is small outline with very thin profile, ideal for space-constrained designs.
NCP1729SN35T1G
NCP1729SN35T1G by Onsemi is a small outline, thin profile switching regulator with a max output current of 0.025A and a max operating temperature of 85°C. Ideal for industrial applications requiring a switched capacitor converter with input voltage ranging from 1.15V to 6V.
NCP1529MUTBG
NCP1529MUTBG by Onsemi is a current-mode switching regulator with max output current of 1A and max switching frequency of 2200 kHz. It operates in industrial temperature range, suitable for buck applications with input voltage ranging from 2.7V to 5.5V.
NCP1207ADR2G
NCP1207ADR2G by Onsemi is a switching controller with a max output current of 0.5A and a max switching frequency of 200kHz. It operates in automotive temperature grades and uses pulse width modulation control technique, making it ideal for automotive applications requiring efficient power management.
NCP1593AMNTWG
NCP1593AMNTWG by Onsemi is a current-mode switching regulator with max output current of 5.5A and max switching frequency of 1130kHz. Ideal for industrial applications, it operates b/w -40 to 85°C, has a small outline package style, and supports pulse width modulation control technique.
NCP1034DR2G
NCP1034DR2G by Onsemi is a switching controller with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures (-40 to 125 °C) and features hysteric current mode control technique. Ideal for applications requiring high efficiency and compact design, such as automotive electronics or industrial automation systems.
NCP1397ADR2G
SWITCHING CONTROLLER; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Input Voltage: 20 V;
NCP1395BDR2G
NCP1395BDR2G by Onsemi is a small outline switching controller with current-mode control technique, operating at a max frequency of 1MHz. It has a wide input voltage range from 8.3V to 20V, making it suitable for various applications requiring efficient power management in compact designs. The push-pull switcher configuration and resonant control make it ideal for high-frequency power conversion needs.
NCP1532MUAATXG
NCP1532MUAATXG by Onsemi is a dual switching controller with a max output current of 0.6A and a max switching frequency of 2700 kHz. It operates in an industrial temperature grade range from -40 to 85°C, making it suitable for various applications requiring precise current-mode control. The small outline package with a very thin profile and surface mount capability makes it ideal for space-constrained designs.
NCP1529ASNT1G
NCP1529ASNT1G by Onsemi is a current-mode switching regulator with 1A output, 2200kHz max frequency, and 3.6V nominal input voltage. Ideal for industrial applications requiring efficient power management in compact spaces. Features small outline package with dual terminals and pulse width modulation control technique.
NCP1397BDR2G
NCP1397BDR2G by Onsemi is a switching controller with 1A output current and 560kHz max switching frequency. It operates on 10.3-20V input voltage range, ideal for resonant control applications in compact designs. The small outline package with gull wing terminals makes it suitable for surface mount PCBs.
NCP1252ADR2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 550 kHz;
NCP1200D60R2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
NCP1423DMR2G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
NCP1597BMNTWG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved