Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP1015AP065G by Onsemi is a switching regulator with 1A output current, 71kHz max frequency, and 8V input voltage. It uses pulse width modulation for control and has a compact rectangular package ideal for power management applications.
Median Price
$0.890
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.739
10k+ parts
$0.658
Digiode
$0.726
Bristol Electronics
$1.875
$0.694
$0.525
Chip Stock
Flip Electronics
Vyrian
Nova Conductors
Ampacity Inc.
$0.650
Semicontronic
$0.634
$0.630
Corphita
$0.688
Corohmni
$0.764
Modulus Dynamics
$0.932
Microchip USA
$10.075
AZTECH Wire
$20.470
Perfect Parts
Problanco Electronics
TANS Electronics
RC Electronics
Kepictronics
Kulean Microsystems
Authorized Procurement Solutions
SupplyDigital Components
Continental Prestige Electronics
Argo Parts USA
Aranea Global
UHIMA Technologies
Plastic/Epoxy material provides durability and protection for the internal components, ensuring a longer lifespan for the product.
Rectangular shape allows for easier integration into circuit designs and PCB layouts.
Having 7 terminals provides flexibility in connection options and allows for multiple input/output configurations.
Current-mode control offers excellent line and load regulation, making the product suitable for applications with varying power demands.
Matte tin finish ensures good electrical conductivity and resistance to corrosion, improving the overall performance of the product.
With a maximum output current of 1A, this product can deliver sufficient power for a variety of electronics applications.
Pulse width modulation allows for efficient energy conversion and precise control over the output voltage, making the product energy-efficient.
Switching Regulators & Controllers NCP1015AP065G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
NCP1015AP065G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Parts obs 21/Apr/2022
PCN Design/Specification - NCP10YYY/SC1076 03/Feb/2017 PDIP7 19/Jul/2016
PCN Assembly/Origin - Qualification Assembly Site 01/Jul/2014
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Panjit International
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
Uniohm
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
TPS62410DRCR
TPS62410DRCR by Texas Instruments is a dual switching controller with a max output current of 0.8A and a max switching frequency of 2500kHz. It operates in voltage-mode control technique, suitable for industrial applications requiring precise power regulation in compact spaces.
LM51561DSSR
LM51561DSSR by Texas Instruments is a switching controller with a 12V nominal input voltage and 300V max output voltage. Operating in current-mode control technique, it has a max switching frequency of 500 kHz. Ideal for automotive applications due to its -40 to 125 °C temperature grade range.
LT1616ES6#TRMPBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS60403QDBVRQ1
TPS60403QDBVRQ1 by Texas Instruments is a small outline, low profile switched capacitor converter with a max output current of 0.06A and a max switching frequency of 250kHz. Ideal for automotive applications due to its wide temperature range and dual terminal position.
TPS62177DQCT
TPS62177DQCT by Texas Instruments is a switching regulator with a nominal input voltage of 12V and output voltage of 3.3V, suitable for industrial applications. It operates in buck configuration with a max output current of 0.5A and a max switching frequency of 1000kHz, making it ideal for compact designs requiring efficient power management.
LM5156DSSR
LM5156DSSR by Texas Instruments is a switching controller with a 12V nominal input voltage and 300V max output voltage. Operating at -40 to 125°C, it uses pulse width modulation control technique for buck-boost configuration. Ideal for automotive applications due to its small outline package style and high max switching frequency of 500 kHz.
TPS54302DDCR
TPS54302DDCR by Texas Instruments is a switching regulator with 3A output current, 400kHz max frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its compact size, PWM control mode, and buck switcher configuration.
TPS54160DGQR
TPS54160DGQR by Texas Instruments is a switching regulator with a max output current of 1.5A and a max operating temperature of 150°C. It operates in buck configuration, suitable for automotive applications due to its wide input voltage range of 3.5V to 60V and compact package style.
MC33063AD
MC33063AD by Texas Instruments is a voltage-mode switching regulator with 5V nominal input and output voltages up to 40V. It operates in industrial temperature range (-40°C to 85°C) with a max output current of 1.5A, making it suitable for various power supply applications. The IC features pulse width modulation control technique and buck-boost switcher configuration in a small outline package.
LM27761DSGT
LM27761DSGT by Texas Instruments is a small outline, heat sink package with 8 terminals. It operates at -40 to 85°C and supports input voltage from 2.7V to 5.5V, outputting up to -1.5V at 0.25A max current. Ideal for industrial applications requiring a switched capacitor inverter with pulse frequency modulation control technique.
LMR14010ADDCR
LMR14010ADDCR by Texas Instruments is a small outline, thin profile switching regulator with 6 terminals. It operates b/w -40 to 125°C, supporting input voltages from 4-40V and output currents up to 1A. Ideal for automotive applications due to its pulse width modulation control mode and buck switcher configuration at a max frequency of 700kHz.
TPS54062DGKR
TPS54062DGKR by Texas Instruments is a switching regulator with a max output voltage of 58V and max output current of 0.05A, suitable for automotive applications. It operates b/w -40 to 125°C, with a control mode of current-mode PWM and a compact package style ideal for space-constrained designs.
MC34063AP
Fairchild Semiconductor
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS54160DGQG4
TPS54160DGQG4 by Texas Instruments is a switching regulator with 1.5A output current, 2500 kHz max switching frequency, and 150°C max operating temperature. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and wide input voltage range of 3.5V to 60V.
LM2733XMFX/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM22672MRE-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 40;
LM22676MRE-5.0/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e3;
LMR14203XMKX/NOPB
LMR14203XMKX/NOPB by Texas Instruments is a switching regulator with max output voltage of 34V, operating temp range -40 to 125°C, and max output current of 0.3A. Ideal for automotive applications due to its compact size, PWM control technique, and buck switcher configuration.
TPS5410DRG4
TPS5410DRG4 by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max input voltage of 36V. It operates in the automotive temperature grade range (-40 to 125°C) and uses pulse width modulation control technique. This small outline package (4.9mm x 3.9mm) is ideal for applications requiring efficient power conversion in tight spaces.
LM2675M-5.0
LM2675M-5.0 by Texas Instruments is a voltage-mode switching regulator with 1A output current, 5V nominal output voltage, and 260 kHz max switching frequency. Ideal for automotive applications due to its DMOS technology and wide operating temperature range (-40 to 125°C).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP1595AMNR2G
NCP1595AMNR2G by Onsemi is a current-mode switching regulator with max output current of 6.1A and max switching frequency of 1130kHz. It operates b/w -40 to 85°C, ideal for industrial applications requiring efficient power management in compact spaces. The IC features pulse width modulation control technique and buck switcher configuration, making it suitable for various electronic devices.
NCP1403SNT1G
NCP1403SNT1G by Onsemi is a voltage-mode switching regulator with a max output current of 0.6A and a boost switcher configuration. Operating temperature ranges from -40 to 85°C, making it suitable for industrial applications. This small outline IC has 5 terminals, matte tin finish, and supports a max input voltage of 5.5V at a frequency of up to 300kHz.
NCP1521BSNT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP1406SNT1G
NCP1406SNT1G by Onsemi is a switching regulator with current-mode control, operating b/w -40 to 85°C. It has a boost configuration, supporting input voltages from 1.4V to 5.5V and output currents up to 25mA. Ideal for industrial applications requiring high-frequency pulse modulation in a compact SOT-23 package.
NCP1597AMNTWG
NCP1597AMNTWG by Onsemi is a current-mode switching regulator with a max operating temp of 85°C and freq of 1130 kHz. Its small outline package makes it ideal for industrial applications requiring high efficiency power management in compact spaces. With surface mount capability and dual terminals, it offers reliable performance in harsh environments.
NCP1593BMNTWG
NCP1593BMNTWG by Onsemi is a current-mode switching regulator with a max output current of 5.5A and a max switching frequency of 1130kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces. The package style is small outline with very thin profile, ideal for space-constrained designs.
NCP1729SN35T1G
NCP1729SN35T1G by Onsemi is a small outline, thin profile switching regulator with a max output current of 0.025A and a max operating temperature of 85°C. Ideal for industrial applications requiring a switched capacitor converter with input voltage ranging from 1.15V to 6V.
NCP1529MUTBG
NCP1529MUTBG by Onsemi is a current-mode switching regulator with max output current of 1A and max switching frequency of 2200 kHz. It operates in industrial temperature range, suitable for buck applications with input voltage ranging from 2.7V to 5.5V.
NCP1207ADR2G
NCP1207ADR2G by Onsemi is a switching controller with a max output current of 0.5A and a max switching frequency of 200kHz. It operates in automotive temperature grades and uses pulse width modulation control technique, making it ideal for automotive applications requiring efficient power management.
NCP1593AMNTWG
NCP1593AMNTWG by Onsemi is a current-mode switching regulator with max output current of 5.5A and max switching frequency of 1130kHz. Ideal for industrial applications, it operates b/w -40 to 85°C, has a small outline package style, and supports pulse width modulation control technique.
NCP1034DR2G
NCP1034DR2G by Onsemi is a switching controller with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures (-40 to 125 °C) and features hysteric current mode control technique. Ideal for applications requiring high efficiency and compact design, such as automotive electronics or industrial automation systems.
NCP1397ADR2G
SWITCHING CONTROLLER; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Input Voltage: 20 V;
NCP1395BDR2G
NCP1395BDR2G by Onsemi is a small outline switching controller with current-mode control technique, operating at a max frequency of 1MHz. It has a wide input voltage range from 8.3V to 20V, making it suitable for various applications requiring efficient power management in compact designs. The push-pull switcher configuration and resonant control make it ideal for high-frequency power conversion needs.
NCP1532MUAATXG
NCP1532MUAATXG by Onsemi is a dual switching controller with a max output current of 0.6A and a max switching frequency of 2700 kHz. It operates in an industrial temperature grade range from -40 to 85°C, making it suitable for various applications requiring precise current-mode control. The small outline package with a very thin profile and surface mount capability makes it ideal for space-constrained designs.
NCP1529ASNT1G
NCP1529ASNT1G by Onsemi is a current-mode switching regulator with 1A output, 2200kHz max frequency, and 3.6V nominal input voltage. Ideal for industrial applications requiring efficient power management in compact spaces. Features small outline package with dual terminals and pulse width modulation control technique.
NCP1397BDR2G
NCP1397BDR2G by Onsemi is a switching controller with 1A output current and 560kHz max switching frequency. It operates on 10.3-20V input voltage range, ideal for resonant control applications in compact designs. The small outline package with gull wing terminals makes it suitable for surface mount PCBs.
NCP1252ADR2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 550 kHz;
NCP1200D60R2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
NCP1423DMR2G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
NCP1597BMNTWG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved