Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCL30081BSNT1G by Onsemi is a Graphics Display Driver with 12V power supply, operating temperature range of -40 to 125 °C. It features a small outline, thin profile package style and Gull Wing terminal form. Ideal for automotive LED display driver applications.
Median Price
$0.475
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.395
10k+ parts
$0.352
DigiKey
$0.410
Verical
$0.493
$0.440
Digiode
$0.370
Vyrian
$0.390
Corphita
$0.351
Corohmni
Continental Prestige Electronics
$0.323
Perfect Parts
Kulean Microsystems
TANS Electronics
SupplyDigital Components
Problanco Electronics
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
GreenTree Electronics
UHIMA Technologies
Microchip USA
Provides durability and protection for the internal components of the graphics display driver.
Facilitates easy and efficient installation on printed circuit boards.
Operates at a standard voltage level, ensuring compatibility with a variety of systems.
Can withstand high operating temperatures, making it suitable for demanding environments.
Provides a reliable and stable electrical connection.
Matches the power supply requirement of the graphics display driver for seamless integration.
Graphics Display Drivers NCL30081BSNT1G attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
NCL30081BSNT1G Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 22/Dec/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
Promax-johnton
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Crimson Semiconductor
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
Pulse Electronics
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LT3797EUKG#PBF
Analog Devices
LT3797EUKG#PBF by Analog Devices is a LED display driver with 47 terminals, operating voltage range of 2.5V to 40V, and temperature grade suitable for automotive applications. It features true output polarity, standard input characteristics, and a compact rectangular chip carrier package ideal for graphics displays.
MAX25611CATC/VY+T
Maxim Integrated
LED DISPLAY DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
TPS92518QPWPRQ1
Texas Instruments
TPS92518QPWPRQ1 by Texas Instruments is a 24-terminal LED display driver with 2 channels, operating voltage range of 6.5V to 42V, and AEC-Q100 screening for automotive applications. It features a serial data input mode, Gull Wing terminal form, and compact rectangular package style suitable for graphics displays in automotive environments. With a wide temperature range from -40°C to 125°C and moisture sensitivity level of 3, it ensures reliable performance in harsh conditions.
MAX6958BAEE+
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HSSOP; Package Shape: RECTANGULAR;
LT3756EUD-1#TRPBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
FAN5702UMP15X
FAN5702UMP15X by Onsemi is a SERIAL graphics display driver with 16 terminals, operating voltage range of 2.7V to 5.5V, and industrial temperature grade up to 85°C. Ideal for LED display driver applications due to its compact square package style and low power consumption at 0.4 MHz frequency.
LT3797IUKG#PBF
LT3797IUKG#PBF by Analog Devices is a LED display driver with 47 terminals, operating voltage range of 2.5V to 40V, and temperature grade suitable for automotive applications. It features a rectangular package shape, matte tin terminal finish, and true output polarity. Ideal for graphics displays in automotive environments due to its high supply voltage tolerance and wide operating temperature range.
MAX6962ATH
MAX6962ATH by Maxim Integrated is a graphics display driver with dot matrix display mode and serial data input. It operates at 2.7-3.6V, has 44 terminals in a square package, and supports multiplexed displays. Ideal for automotive applications due to its BICMOS technology and LED display driver interface IC type.
LM3409HVMY
LM3409HVMY by Texas Instruments is a LED display driver with a supply voltage range of 6V to 42V, suitable for automotive applications. This small outline package IC has 10 terminals and operates b/w -40°C to 125°C. With gull wing terminal form and 0.5mm pitch, it's ideal for graphics display drivers in compact designs.
FAN5702UMP30X
Fairchild Semiconductor
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
LT3518IFE#PBF
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR;
TLD2310ELXUMA1
TLD2310ELXUMA1 by Infineon Technologies is a LED display driver with 14 terminals and a max supply voltage of 40V. It features a small outline package style, suitable for graphics display applications. With AEC-Q100 screening level, this IC has a low profile design and is surface mountable.
TLC5922DAPG4
TLC5922DAPG4 by Texas Instruments is a graphics display driver with 32 terminals, operating voltage of 3-5.5V, and constant-current output for LED displays. It features serial data input mode, segment display mode, and small outline package style. Ideal for LED display applications requiring high performance in commercial environments.
MAX7219EWG+
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
BCR405UE6327HTSA1
BCR405UE6327HTSA1 by Infineon Technologies is a small outline LED display driver with 6 terminals. It operates at a nominal voltage of 10V and has a terminal pitch of 0.95mm. This graphics driver is ideal for applications requiring compact design and surface mount technology.
MIC2292-34YML-TR
Microchip Technology
MIC2292-34YML-TR by Microchip is a graphics display driver with 3 segments, suitable for automotive applications. It operates b/w -40 to 125 °C, with a supply voltage range of 2.5V to 10V. The chip carrier package has a very thin profile and nickel palladium gold terminal finish for surface mount assembly.
LM3409QMY/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
NCP5603MNR2G
NCP5603MNR2G by Onsemi is a Graphics Display Driver with 10 terminals, operating voltage range of 2.85V to 5.5V, and industrial temperature grade up to 85°C. It is ideal for LED display driver applications due to its compact square package shape and quad terminal position.
ISL97671AIRZ-T
Intersil
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: RECTANGULAR;
TLC5971RGER
TLC5971RGER by Texas Instruments is a graphics display driver with 12 channels and segments. It operates on a supply voltage range of 6-17V, providing constant-current output for LED displays. This IC is ideal for industrial applications requiring serial data input and segment display mode in a compact chip carrier package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCL30170ADR2G
NCL30170ADR2G by Onsemi is a LED display driver with 10 terminals, operating temperature range of -40 to 125 °C. It has a supply voltage range of 19.5-20.5 V and low supply current of 1.2 mA, making it ideal for automotive applications requiring compact design and high reliability.
NCL30186BDR2G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SOP; Package Shape: RECTANGULAR;
NCL30170BDR2G
NCL30188BDR2G
NCL30188BDR2G by Onsemi is a LED display driver with 8 terminals, operating temperature range of -40 to 125 °C. It has a supply voltage range of 16-20 V and low supply current of 4.5 mA, making it ideal for automotive applications requiring compact design and high reliability.
NCL30288BSNT1G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR;
NCL30000DR2G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCL30080ASNT1G
NCL30080ASNT1G by Onsemi is a LED display driver with 12V power supply, 6 terminals, and small outline thin profile package. It is used in graphics display drivers for applications requiring high peak reflow temperature of 260°C and dual terminal position.
NCL30051DR2G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
NCL30081ASNT1G
NCL30002DR2G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; JESD-609 Code: e3;
NCL30030A3DR2G
LED DISPLAY DRIVER; No. of Terminals: 15; Surface Mount: YES; Qualification: Not Qualified; Nominal Supply Voltage: 12 V; Package Equivalence Code: SOP15/16,.25;
NCL30060B1DR2G
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 7; Package Code: SOP; Package Shape: RECTANGULAR;
NCL30073SN065T1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 30;
NCL30030B3DR2G
LED DISPLAY DRIVER; No. of Terminals: 15; Power Supplies (V): 12; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Nominal Supply Voltage: 12 V;
NCL30080BSNT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR; Package Equivalence Code: TSOP6,.11,37;
NCL30030A2DR2G
LED DISPLAY DRIVER; No. of Terminals: 15; Surface Mount: YES; Power Supplies (V): 12; Package Equivalence Code: SOP15/16,.25; Package Body Material: PLASTIC/EPOXY;
NCL30060B2DR2G
NCL30030B1DR2G
LED DISPLAY DRIVER; No. of Terminals: 15; Power Supplies (V): 12; Moisture Sensitivity Level (MSL): 1; Nominal Supply Voltage: 12 V; Package Equivalence Code: SOP15/16,.25;
NCL30060B3DR2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved