Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi NCID9411R2 is a digital isolator with 16 terminals, operating b/w -40 to 125 °C. It has a supply voltage range of 2.5V to 5.5V and comes in a small outline package style. Ideal for applications requiring interface isolation in compact electronic devices.
Median Price
$5.200
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$2.259
100+ parts
$2.115
1k+ parts
$2.027
10k+ parts
-
Mouser Electronics
$6.520
$4.210
$3.520
$3.280
Newark
$6.580
$4.240
$4.100
Element14
$11.460
$6.530
$6.110
Farnell
$3.880
$3.690
Verical
Chip Stock
Digiode
Vyrian
Problanco Electronics
SupplyDigital Components
TANS Electronics
Kulean Microsystems
Authorized Procurement Solutions
UHIMA Technologies
Corphita
Corohmni
Provides durability and protection for the internal components of the IC, ensuring a longer lifespan.
Allows for easy integration onto circuit boards, saving time and effort during assembly.
Supports a wide range of voltage inputs, making the IC versatile for various applications.
Enables easy placement and alignment on the circuit board, enhancing overall design efficiency.
Can withstand extreme cold temperatures, making it suitable for use in harsh environments.
Optimal voltage level for stable performance, ensuring reliability in operation.
Other Function Interface ICs NCID9411R2 attributes and parameters. Explore more Other Function Interface ICs devices from Onsemi
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
NCID9411R2 Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Lite-on Semiconductor
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SI8641BD-B-IS
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
PCA9306DC1Z
PCA9306DC1Z by NXP Semiconductors is an Interface IC with 8 terminals, operating voltage range of 1V to 3.6V, and temperature range from -40°C to 105°C. It features a small outline package style suitable for various applications requiring level shifting and bidirectional voltage translation.
SI8621AB-B-ISR
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 2.5 V;
ISO7762QDWQ1
ISO7762QDWQ1 by Texas Instruments is a digital isolator with 6 channels, operating at -40 to 125°C. It has a supply voltage range of 2.25-5.5V and AEC-Q100 screening for automotive applications. The package is small outline, with dual terminals and Gull Wing form, suitable for surface mount assembly.
ISO7710DWR
ISO7710DWR by Texas Instruments is a 16-terminal interface IC with a supply voltage range of 2.25V to 5.5V, suitable for military-grade applications. It features a small outline package style, Gull Wing terminal form, and operates in temperatures ranging from -55°C to 125°C. The device is designed for surface mount assembly and has a moisture sensitivity level of MSL 2.
SI8661BB-B-IU
Silicon Labs
SI8661BB-B-IU by Silicon Labs is a digital isolator with 16 terminals and a small outline, shrink pitch package style. It operates at a min voltage of 2.375V and max voltage of 5.5V, making it suitable for various applications in the automotive industry due to its AEC-Q100 screening level.
SI8641ED-B-IS
Silicon Labs' SI8641ED-B-IS is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for surface mount applications, making it ideal for industrial automation and control systems requiring reliable signal isolation.
ISO7231CDWR
ISO7231CDWR by Texas Instruments is a 16-terminal IC with 3 functions, operating at -40 to 125°C. It has a supply voltage range of 3.3V to 5V and is ideal for automotive applications due to its CMOS technology and nickel palladium gold finish. The small outline package makes it suitable for surface mount designs in various interface circuits.
ISOW7841DWER
ISOW7841DWER by Texas Instruments is a digital isolator with 4 channels, operating at a supply voltage range of 3V to 5.5V. It features a small outline package style, dual terminal position, and automotive temperature grade suitability. This IC is ideal for applications requiring high isolation levels in harsh environments.
ISO7841DWR
ISO7841DWR by Texas Instruments is a digital isolator with 4 channels, operating at -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and comes in a small outline package suitable for military-grade applications. The IC features CMOS technology, Gull Wing terminals, and is surface mountable with moisture sensitivity level of 2.
ISOW7843FDWER
ISOW7843FDWER by Texas Instruments is a digital isolator with 4 channels, operating at -40 to 125°C. It has a supply voltage range of 3-5.5V and comes in a small outline package suitable for automotive applications. With CMOS technology and nickel palladium gold finish, it offers reliable isolation for various interface functions.
ISO7220CDG4
ISO7220CDG4 by Texas Instruments is an 8-terminal interface IC in a small outline package. With nickel palladium gold finish, it has a peak reflow temperature of 260°C and is suitable for automotive applications. Its compact size (4.9mm x 3.9mm x 1.75mm) makes it ideal for surface mount designs.
TXS0102DCTTG4
TXS0102DCTTG4 by Texas Instruments is a 2-bit interface IC with max supply voltage of 5.5V and min operating temp of -40°C. It's used in industrial applications for its 3-STATE output characteristics, small outline package style, and dual terminal position.
TUSB4041IPAPR
TUSB4041IPAPR by Texas Instruments is an interface IC with a max supply voltage of 1.26V and a min supply voltage of 0.99V. It is commonly used in industrial applications due to its temperature grade and moisture sensitivity level (MSL).
ISO7241ADWR
ISO7241ADWR by Texas Instruments is a 16-terminal digital isolator with 4 functions. It operates b/w -40 to 125 °C and has a supply voltage range of 3.15-3.6 V, making it ideal for automotive applications requiring high temperature tolerance and electrical isolation.
PCA9849PWJ
PCA9849PWJ by NXP Semiconductors is a small outline interface IC with 16 terminals. It operates b/w -40 to 85°C, with supply voltage ranging from 0.8V to 3.6V. Ideal for industrial applications requiring a compact and efficient interface circuit solution.
ISO6721FBDR
ISO6721FBDR by Texas Instruments is a CMOS interface IC with 2 functions, operating at -40 to 125 °C. It has a supply voltage range of 1.71V to 5.5V and comes in a small outline package suitable for automotive applications. The IC features dual terminals with nickel palladium gold finish and is surface mountable, making it ideal for various electronic systems.
ADUM2400ARWZ
Analog Devices
ADUM2400ARWZ by Analog Devices is a 16-terminal interface IC with CMOS technology. It operates b/w -40 to 105°C, suitable for industrial applications. With a supply voltage range of 2.7-5.5V, it offers dual terminal position and matte tin finish for robust connectivity in compact spaces.
PCA9548ADBR
PCA9548ADBR by Texas Instruments is an 8-channel interface IC with a supply voltage range of 2.3V to 5.5V. It operates in industrial temperature range (-40°C to 85°C) and has a small outline package style for surface mount applications. The terminal finish is Nickel/Palladium/Gold, making it suitable for various function interface circuits.
MAX31911AUI+
Analog Devices' MAX31911AUI+ is a digital I/P module with 28 terminals, operating voltage range of 7-36 V, and automotive temperature grade. It features a small outline package with dual terminal position and matte tin finish. Ideal for applications requiring high supply voltage tolerance in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCID9411
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 3.3 V;
NCID9311
INTERFACE CIRCUIT; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
NCID9211
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
NCID9410
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
NCID9400
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 2.5 V;
NCID9301
INTERFACE CIRCUIT;
NCID9200R2
NCID9311R2
INTERFACE CIRCUIT; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
NCID9211R2
NCID9401R2
The Onsemi NCID9401R2 is a digital isolator with 16 terminals, operating voltage range of 2.5V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package with gull wing terminals, suitable for various interface applications requiring isolation and surface mount compatibility.
NCID9400R2
NCID9216R2
NCID9410R2
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 1;
NCID9210R2
NCID9301R2
NCID9200
NCID9210
NCID9216
NCID9401
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP16,.4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved