Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MOC3011SR2M by Onsemi is a single optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, with an isolation voltage of 5300V. Ideal for triggering devices in applications requiring high voltage protection and signal isolation.
Median Price
$0.370
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
$0.271
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.830
$0.440
$0.364
$0.323
DigiKey
$0.920
$0.471
$0.395
Rochester
$0.338
$0.280
$0.250
Verical
$0.380
$0.312
Chip1Stop
$0.361
$0.340
$0.326
Avnet
Digiode
$0.262
Nova Conductors
$0.307
TME
$0.780
$0.399
Vyrian
Flip Electronics
Chip Stock
IBS Electronics
$0.302
$0.295
NAC Semi
$0.382
$0.347
Cyclops Electronics Ltd
Ampacity Inc.
$0.235
Corphita
$0.248
Corohmni
$0.276
Component Stockers USA
$0.270
$0.240
Bastille Electronics
$0.292
$0.277
$0.273
Argo Parts USA
$0.298
Continental Prestige Electronics
$0.301
Aztec Data Supply Inc.
$0.636
GreenTree Electronics
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Lixinc
A-Z Elektronik GmbH
TANS Electronics
SupplyDigital Components
Kulean Microsystems
Perfect Parts
Supply Digital
Glotronic Ltd.
Problanco Electronics
Eastek
$0.375
Kepictronics
UHIMA Technologies
Low on-state voltage ensures efficient performance and minimizes power consumption.
Simplified single configuration makes it easy to integrate into various systems.
High surge current capability provides robust protection against voltage spikes.
Optimized forward current rating for reliable operation without overheating.
Triac output optocoupler offers precise control and compatibility with triac-based systems.
Wide operating temperature range allows for use in diverse environmental conditions.
Can operate in extreme cold temperatures without compromising performance.
Tin terminal finish provides good solderability and ensures reliable electrical connections.
Low input trigger current requirement helps in reducing power consumption and enhancing efficiency.
High off-state voltage rating ensures reliable isolation and protection against voltage transients.
Nominal input trigger current ensures consistent performance and compatibility with standard input signals.
Low reverse leakage current minimizes power loss and enhances overall efficiency.
High off-state voltage rating provides insulation and protection against high voltages.
High isolation voltage rating ensures safety and reliability in high-voltage applications.
Surface mount design offers easy and convenient installation on PCBs.
Optocoupler Trigger Device Outputs MOC3011SR2M attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Input Trigger Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
Peak Surge Current:
Repetitive Off-state Voltage (Peak):
Maximum Reverse Leakage Current:
Sub-Category:
Terminal Finish:
MOC3011SR2M Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1552200168
Molex
WIRE AND CABLE;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
EU2B-YS3203F
Idec
ROTARY SWITCH;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
M39029/58-360
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
4N393S
4N393S by Fairchild Semiconductor is an SCR output optocoupler with a max on-state voltage of 1.3V and peak surge current of 10A. It operates b/w -55°C to 100°C, with a max isolation voltage of 5300V. Ideal for applications requiring high isolation and triggering devices in various electronic circuits.
MOC3051SR2VM
The Onsemi MOC3051SR2VM is a single optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 7500V, and is ideal for triggering devices in various applications.
VOT8024AB-T1
Vishay Intertechnology
Vishay Intertechnology's VOT8024AB-T1 is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for applications requiring high isolation voltage of 5300V, such as trigger device outputs in industrial electronics. Operating temperature ranges from -55 to 110°C, making it suitable for various environments.
TLP543J
Toshiba
Toshiba's TLP543J is a single SCR output optocoupler with max forward current of 0.07A and isolation voltage of 2500V. Operating b/w -30°C to 85°C, it has a peak off-state voltage of 600V. Ideal for triggering devices in various applications requiring high isolation and low trigger current.
MOC3043TVM
MOC3043TVM by Onsemi is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85°C, has 400V repetitive off-state voltage, and offers 7500V isolation. Ideal for triggering devices in applications requiring high isolation levels and precise control of AC loads.
MOC3063SM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: 5 mA; Maximum Operating Temperature: 85 Cel; Peak Surge Current: 1 A;
TLP267J(TPR,E
Toshiba's TLP267J(TPR,E is a single optocoupler with peak surge current of 1.2A and max forward current of 0.0075A. Ideal for triggering devices, it offers a max isolation voltage of 3750V, operating b/w -25 to 85°C, making it suitable for various applications requiring high voltage protection.
MOC3041SR2VM
MOC3041SR2VM by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 7500V, and is ideal for triggering devices in applications requiring high electrical isolation.
MOC3023XSMT&R
Isocom Components
MOC3023XSMT&R by Isocom Components is a single optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40°C to 100°C, ideal for triggering devices in applications requiring high isolation voltage up to 5300V. With a surface mount feature, it offers reliable performance in various electronic circuits.
FOD4108V
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Additional Features: UL RECOGNIZED, VDE APPROVED; Configuration: SINGLE; No. of Elements: 1; Minimum Peak Off-state Voltage: 800 V; Maximum Forward Current: .03 A;
MOC3022X
The Isocom Components MOC3022X is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40°C to 100°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high electrical isolation.
IL4108
The Vishay Intertechnology IL4108 is a single optocoupler trigger device with a max forward current of 0.06A and a min peak off-state voltage of 800V. It operates b/w -55°C to 100°C, providing an isolation voltage of 5300V. Ideal for applications requiring TRIAC output optocouplers with zero cross over sensitivity.
BRT13H-X006
Vishay Semiconductors
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .3 A; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
MOC3052SR2M
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Nominal Input Trigger Current: 10 mA; Maximum Forward Current: .06 A;
MOC3022SVM
The Onsemi MOC3022SVM is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 °C to 85°C, with an isolation voltage of 4170V. Ideal for triggering devices in applications requiring high voltage protection and control.
MOC3083SR2VM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 800 V; No. of Elements: 1; Repetitive Off-state Voltage (Peak): 800 V;
MOC3021SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Input Trigger Current: .015 A; Peak Surge Current: 1 A; Configuration: SINGLE;
MOC3053VM
The Onsemi MOC3053VM is a single optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85 °C, with a max isolation voltage of 4170V. Ideal for triggering devices in applications requiring high voltage protection and signal isolation.
MOC3081SVM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Minimum Peak Off-state Voltage: 800 V; Minimum Operating Temperature: -40 Cel;
MOC3073M
The Onsemi MOC3073M is a TRIAC output optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85 °C, has an isolation voltage of 4170V, and is ideal for triggering devices in applications requiring high voltage protection.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
The Onsemi MOC3063SM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85°C, has a repetitive off-state voltage of 600V, and offers isolation up to 4170V. Ideal for triggering devices in applications requiring high-voltage protection and signal isolation.
MOC3063S-TA1
Lite-on Technology
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Forward Current: .05 A; Maximum Isolation Voltage: 5000 V; No. of Elements: 1;
MOC3052SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Configuration: SINGLE; Maximum Input Trigger Current: .01 A;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Nominal Input Trigger Current: 10 mA; No. of Elements: 1; Maximum Forward Current: .05 A; JESD-609 Code: e3;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Maximum Operating Temperature: 85 Cel; No. of Elements: 1;
MOC3043M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 7500 V; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .1 A;
The Onsemi MOC3043M is a single optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for triggering devices, it operates b/w -40 to 85°C, offers 7500V isolation voltage, and has a max input trigger current of 0.005A.
MOC3023SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Peak Surge Current: 1 A; Minimum Peak Off-state Voltage: 400 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; JESD-609 Code: e3; Configuration: SINGLE; Maximum On State Voltage: 3 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 400 V; Maximum Forward Current: .06 A; Minimum Operating Temperature: -40 Cel;
Harris Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Leakage Current: .0000001 A; Repetitive Off-state Voltage (Peak): 400 V; Maximum Input Trigger Current: .015 A;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Repetitive Off-state Voltage (Peak): 400 V; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Minimum Peak Off-state Voltage: 400 V; Maximum Operating Temperature: 85 Cel;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Peak Surge Current: 1 A; Maximum Operating Temperature: 100 Cel; Maximum Reverse Leakage Current: .0001 A;
MOC3063SR2VM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Peak Surge Current: 1 A; Maximum Operating Temperature: 85 Cel;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Peak Off-state Voltage: 600 V;
MOC3083SR2M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Voltage: 3 V; No. of Elements: 1; Maximum Reverse Leakage Current: .0001 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved