Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3; No. of Elements: 1; Nominal Input Trigger Current: .75 mA;
Median Price
$2.913
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$1.735
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$4.510
$2.650
$2.220
$2.060
DigiKey
$2.249
$2.123
Chip1Stop
$13.000
$5.320
Future Electronics
$1.950
Verical
Rochester
$1.900
$1.700
$1.600
Digiode
$2.004
Nova Conductors
$2.172
NAC Semi
$3.900
Vyrian
Infinite Electronics LLP
Flip Electronics
Corohmni
$0.277
Aztec Data Supply Inc.
$0.313
Advanced Electronics
$0.686
$0.624
$0.563
Semicontronic
$1.510
$1.472
$1.465
Ampacity Inc.
Corphita
$1.899
Argo Parts USA
Continental Prestige Electronics
$2.128
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
Kepictronics
Perfect Parts
TANS Electronics
Supply Digital
UHIMA Technologies
Bastille Electronics
GreenTree Electronics
Optocoupler Trigger Device Outputs FOD420SD attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Fairchild Semiconductor
Additional Features:
Configuration:
Maximum Forward Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
Terminal Finish:
FOD420SD Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.80.00
SB
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Infineon Technologies
Taiwan Semiconductor
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
Secos
Micro Commercial Components
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
CRCW06030000Z0EAHP
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Jinan Jingheng Electronics
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Changzhou Galaxy Century Microelectronics
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
MOC3020
Thomson Consumer Electronics
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Repetitive Off-state Voltage (Peak): 400 V; Maximum Reverse Leakage Current: .0000001 A; Maximum On State Current: .1 A; Peak Surge Current: 1 A;
IL4217-X009
TRIAC OUTPUT OPTOCOUPLER; No. of Elements: 1; Maximum Forward Current: .06 A; Nominal Input Trigger Current: .7 mA; Configuration: SINGLE; Minimum Peak Off-state Voltage: 700 V;
MOC3083SM
Isocom Components
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: TIN; No. of Elements: 1; Maximum Forward Current: .05 A; Configuration: SINGLE; Minimum Operating Temperature: -30 Cel;
MOC3081SR2M
MOC3081SR2M by Onsemi is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85°C, has 800V repetitive off-state voltage, and offers 7500V isolation. Ideal for triggering devices in applications requiring high-voltage protection.
MOC3083M
The Onsemi MOC3083M is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40°C to 85°C, with 800V repetitive off-state voltage. Ideal for triggering devices in applications requiring high isolation voltage up to 7500V.
MOC3062TVM
MOC3062TVM by Onsemi is a single optocoupler trigger device with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 4170V, and is ideal for applications requiring TRIAC output optocouplers with zero cross-over.
BRT13H-X006
Siemens
TRIGGER OUTPUT OPTOCOUPLER; Maximum Forward Current: .02 A; Additional Features: UL RECOGNIZED; Maximum On State Current: .3 A; Configuration: SINGLE; Minimum Peak Off-state Voltage: 800 V;
BRT13H-X016
Vishay Intertechnology's BRT13H-X016 is a single optocoupler trigger device with a max forward current of 0.02A and isolation voltage of 5300V. It operates b/w -40°C to 100°C, ideal for applications requiring a nominal input trigger current of 2mA, such as industrial control systems and power supplies.
MOC3082SR2M
The Onsemi MOC3082SR2M is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for applications requiring high isolation voltage of 7500V, operating temperature range from -40 to 85 °C, and surface mounting feature.
MOC3042SR2VM
MOC3042SR2VM by Onsemi is a single optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It is ideal for triggering devices, featuring a triac output and high isolation voltage of 7500V. With surface mounting feature, it operates b/w -40 to 85°C, making it suitable for various applications requiring precise control.
TLP3083(TP1,F(O
Toshiba
Toshiba's TLP3083(TP1,F(O optocoupler has a max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high voltage protection and precise control in temperatures ranging from -25 to 85°C.
TLP748JF(D4,F)
Toshiba's TLP748JF(D4,F) is an SCR output optocoupler with a max input trigger current of 0.01A, off-state voltage of 600V, and isolation voltage of 4000V. Ideal for applications requiring through-hole mounting, it can handle a max on-state current of 0.15A.
IL420-X017T
The Vishay Intertechnology IL420-X017T is a single TRIAC output optocoupler with a max forward current of 0.06 A and isolation voltage of 5300 V. It operates b/w -55°C to 100°C, ideal for triggering devices in applications requiring high voltage protection and low input trigger current of 1 mA.
TLP268J
Toshiba TLP268J is a single optocoupler with peak surge current of 1.2A and max forward current of 0.0075A. Ideal for applications requiring TRIAC output, it offers high isolation voltage of 3750V and can operate in temperatures ranging from -25 to 85°C.
MOC3051SR2VM
The Onsemi MOC3051SR2VM is a single optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 7500V, and is ideal for triggering devices in various applications.
MOC3052SR2M
The Onsemi MOC3052SR2M is a single TRIAC output optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 7500V, and is ideal for triggering devices in applications requiring high voltage protection.
MOC3022SR2M
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Repetitive Off-state Voltage (Peak): 400 V; Peak Surge Current: 1 A;
MOC3021TVM
MOC3021TVM by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high electrical isolation.
TLP267J(TPR,E
Toshiba's TLP267J(TPR,E is a single optocoupler with peak surge current of 1.2A and max forward current of 0.0075A. Ideal for triggering devices, it offers a max isolation voltage of 3750V, operating b/w -25 to 85°C, making it suitable for various applications requiring high voltage protection.
MOC3023VM
The Onsemi MOC3023VM is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high voltage protection.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD4208SDV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: .75 mA; Maximum Forward Current: .03 A; No. of Elements: 1; Configuration: SINGLE;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Input Trigger Current: .002 A; JESD-609 Code: e3; Repetitive Off-state Voltage (Peak): 800 V;
FOD4208SD
FOD4208SD by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It is commonly used in applications requiring optocoupler trigger device outputs, such as in industrial control systems or power management circuits.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 800 V; Nominal Input Trigger Current: .75 mA; JESD-609 Code: e3; Additional Features: UL RECOGNIZED;
FOD4208SV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; Minimum Peak Off-state Voltage: 800 V;
FOD4208SV by Onsemi is a TRIAC OUTPUT OPTOCOUPLER with 3V Max On State Voltage, 3A Peak Surge Current, and -55 to 100°C Operating Temperature. It is ideal for applications requiring optocoupler trigger device outputs in various electronic circuits.
FOD4108SDV
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum Operating Temperature: 100 Cel;
FOD4108SDV by Onsemi is a single TRIAC output optocoupler with 3A peak surge current and 800V repetitive off-state voltage. It operates b/w -55 to 100 °C, ideal for applications requiring high isolation voltage of 5000V in surface mount configurations.
FOD4208
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .03 A; Additional Features: UL RECOGNIZED; Configuration: SINGLE;
The Onsemi FOD4208 is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, with an isolation voltage of 5000V. Ideal for applications requiring optocoupler trigger device outputs in through-hole mounting configurations.
FOD420
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Maximum Reverse Leakage Current: .00001 A; Maximum On State Current: .3 A; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: .75 mA; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5000 V;
FOD4208S
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .03 A; Minimum Peak Off-state Voltage: 800 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; No. of Elements: 1; Maximum On State Voltage: 3 V;
FOD4208TV
FOD4208TV by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55°C to 100°C, ideal for triggering devices in various applications. With an isolation voltage of 5000V, it offers reliable performance in through-hole mounting setups.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .03 A; JESD-609 Code: e3; Nominal Input Trigger Current: .75 mA; Additional Features: UL RECOGNIZED, VDE APPROVED;
FOD420SDV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3; Minimum Peak Off-state Voltage: 600 V;
FOD420SDV by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high voltage protection.
FOD420S
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: .75 mA; Maximum Forward Current: .03 A;
FOD420S by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, ideal for applications requiring high isolation voltage up to 5000V, such as trigger device outputs in various electronic circuits.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved