Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FODM3083R2 by Onsemi is a single TRIAC output optocoupler with max on-state voltage of 3V and max forward current of 0.06A. It operates b/w -40°C to 100°C, has an isolation voltage of 3750V, and is ideal for optocoupler trigger device outputs in various applications.
Median Price
$1.620
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$1.552
100+ parts
$1.476
1k+ parts
-
10k+ parts
Mouser Electronics
$0.935
$0.683
$0.624
DigiKey
$1.710
$0.916
$0.740
Chip1Stop
$9.280
$3.970
$2.610
Flip Electronics (Authorized)
Verical
Nova Conductors
$2.071
TME
$2.150
$1.600
$1.530
Digiode
$2.848
NAC Semi
$0.393
Chip Stock
Flip Electronics
Cyclops Electronics Ltd
Vyrian
Ampacity Inc.
$1.220
Corohmni
$1.696
Continental Prestige Electronics
$2.030
Argo Parts USA
Netroflash
Component Stockers USA
$2.330
$1.480
$1.270
$1.160
Corphita
$2.698
SupplyDigital Components
Perfect Parts
GreenTree Electronics
Problanco Electronics
Glotronic Ltd.
Futuretech Components
Authorized Procurement Solutions
Supply Digital
iodParts Technologies Inc.
$2.488
$2.133
Kulean Microsystems
TANS Electronics
S.R.D Solutions
UHIMA Technologies
This low voltage requirement allows for compatibility with various types of circuits and devices.
The single configuration simplifies the setup process and makes it easy to integrate into existing systems.
With a high forward current, this device can handle heavy loads and provide reliable performance.
The TRIAC output optocoupler type offers precise and efficient control over output signals.
The high operating temperature range ensures reliable operation even in challenging environments.
The low minimum operating temperature allows for use in a wide range of temperature conditions.
The matte tin finish provides a durable coating that resists corrosion and enhances longevity.
The low input trigger current requirement ensures compatibility with a wide range of input devices.
The high off-state voltage tolerance provides protection against voltage surges and spikes.
The TR packing method offers convenient packaging for easy handling and storage.
The nominal input trigger current requirement ensures efficient operation and compatibility with standard input devices.
The low reverse leakage current minimizes power loss and ensures efficient performance.
The high peak off-state voltage tolerance offers protection against high voltage spikes.
The high isolation voltage provides reliable protection and ensures safe operation.
The surface mounting feature allows for easy installation and compact design.
The high on state current capacity allows for handling heavy loads and ensures reliable performance.
Optocoupler Trigger Device Outputs FODM3083R2 attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Input Trigger Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum On State Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Minimum Peak Off-state Voltage:
Repetitive Off-state Voltage (Peak):
Maximum Reverse Leakage Current:
Sub-Category:
Terminal Finish:
FODM3083R2 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Surge Components
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
MOC3022XSM
Isocom Components
MOC3022XSM by Isocom Components is a single optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It is a TRIAC output optocoupler suitable for triggering devices in applications requiring high isolation voltages up to 5300V. With surface mounting feature, it operates b/w -40°C to 100°C, making it ideal for various industrial control systems.
MOC3021
General Electric Solid State
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Nominal Input Trigger Current: 30 mA; Maximum Reverse Leakage Current: .0001 A; Minimum Operating Temperature: -40 Cel;
MOC3021SM
Fairchild Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Input Trigger Current: .015 A; Peak Surge Current: 1 A; Configuration: SINGLE;
MOC3023M
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Input Trigger Current: .005 A; JESD-609 Code: e3; Repetitive Off-state Voltage (Peak): 400 V;
TLP160G
Toshiba
Toshiba's TLP160G is a TRIAC output optocoupler with max. forward current of 0.025A, isolation voltage of 2500V, and on-state current of 0.07A. Ideal for applications requiring single configuration optocoupler trigger devices in the temperature range of -25 to 85°C.
TLP3052A(TP1,F
Toshiba's TLP3052A(TP1,F is a single TRIAC output optocoupler with peak surge current of 1.2A, max forward current of 0.025A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high voltage protection and surface mounting feature.
MOC3023
Harris Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .05 A; No. of Elements: 1; JESD-609 Code: e0; Additional Features: UL RECOGNIZED;
IL4217-X009
Vishay Intertechnology
IL4217-X009 by Vishay Intertechnology is a single TRIAC output optocoupler with a max forward current of 0.06A and isolation voltage of 5300V. It operates b/w -55°C to 100°C, making it suitable for applications requiring high on-state current up to 0.3A in industrial settings.
MOC3063
MOC3063 by Fairchild Semiconductor is a single optocoupler with a max forward current of 0.06 A and a min peak off-state voltage of 600 V. It operates b/w -40 to 85 °C, providing an isolation voltage of 7500 V. Ideal for triggering devices in various applications requiring high-voltage protection and signal isolation.
FOD4216V
Onsemi
FOD4216V by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high electrical isolation.
MOC3083S
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Peak Surge Current: 1 A; Configuration: SINGLE; Maximum On State Voltage: 3 V;
FODM3022
The Onsemi FODM3022 is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 °C to 100°C, with an input trigger current of 0.01A. Ideal for applications requiring high isolation voltage up to 3750V, such as in industrial control systems and power management circuits.
MOC3023SR2M
The Onsemi MOC3023SR2M is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high-voltage protection.
IL420-X017T
The Vishay Intertechnology IL420-X017T is a single TRIAC output optocoupler with a max forward current of 0.06 A and isolation voltage of 5300 V. It operates b/w -55°C to 100°C, ideal for triggering devices in applications requiring high voltage protection and low input trigger current of 1 mA.
MOC3011
Qt Optoelectronics
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .05 A; JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel; Nominal Input Trigger Current: 5 mA;
MOC3062SR2VM
MOC3062SR2VM by Onsemi is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85°C, has 600V repetitive off-state voltage, and offers 4170V isolation. Ideal for triggering devices in applications requiring high isolation levels and reliable performance.
BRT23H
Infineon Technologies
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Peak Off-state Voltage: 800 V; Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED; Configuration: SINGLE;
MOC3031SM
The Onsemi MOC3031SM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Operating from -40 to 85°C, it offers 250V repetitive off-state voltage and 4170V isolation. Ideal for triggering devices in applications requiring high isolation levels and precise control of AC loads.
MOC3081SR2VM
MOC3081SR2VM by Onsemi is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for applications requiring high isolation voltage of 7500V, operating temperature range from -40 to 85 °C, and surface mounting feature.
FODM3012R2
FODM3012R2 by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 to 100 °C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FODM3022_NF098
FODM3022_NF098 by Onsemi is a TRIAC OUTPUT OPTOCOUPLER with 3V Max On State Voltage, 0.06A Max Forward Current, and 3750V Max Isolation Voltage. Ideal for optocoupler trigger device outputs in applications requiring high voltage isolation and precise control of AC loads.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; No. of Elements: 1; Maximum Operating Temperature: 100 Cel; Maximum On State Current: .07 A;
FODM3012R2V_NF098
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Nominal Input Trigger Current: 5 mA; Maximum Input Trigger Current: .005 A;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel; Maximum Reverse Leakage Current: .0001 A;
FODM3053_NF098
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Forward Current: .06 A; JESD-609 Code: e3; Minimum Peak Off-state Voltage: 600 V;
FODM3053-NF098
FODM3053-NF098 by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40°C to 100°C, has an isolation voltage of 3750V, and is ideal for optocoupler trigger device outputs in various applications.
FODM3022R2_NF098
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Reverse Leakage Current: .0001 A; JESD-609 Code: e3; Maximum Isolation Voltage: 3750 V;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel; Minimum Peak Off-state Voltage: 400 V;
FODM3053R2-NF098
FODM3053R2-NF098 by Onsemi is a single configuration optocoupler trigger device output with a max on-state voltage of 3V. It has a max forward current of 0.06A and can operate in temperatures ranging from -40°C to 100°C. This optocoupler is commonly used for applications requiring high isolation voltage and control of AC power circuits.
FODM3053R2_NF098
FODM3053R2_NF098 by Fairchild Semiconductor is a single configuration optocoupler trigger device output with a max forward current of 0.06 A. It is commonly used in applications requiring a nominal input trigger current of 5 mA, a min peak off-state voltage of 600 V, and an isolation voltage of 3750 V.
FODM3063R2
The Onsemi FODM3063R2 is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40°C to 100°C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; Maximum Forward Current: .06 A; Maximum Operating Temperature: 100 Cel; No. of Elements: 1;
FODM3063
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Configuration: SINGLE; Additional Features: UL RECOGNIZED; Maximum On State Current: .07 A;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Maximum On State Current: .07 A; Maximum Isolation Voltage: 3750 V; Minimum Peak Off-state Voltage: 600 V;
FODM3083
FODM3083 by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and a max forward current of 0.06A. It is commonly used in applications requiring optocoupler trigger device outputs, such as in surface mount configurations for temperature ranges b/w -40°C to 100°C.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Maximum On State Current: .07 A; Maximum Forward Current: .06 A; Maximum Operating Temperature: 100 Cel;
FODM3083R1
TRIAC OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 3750 V; No. of Elements: 1; Configuration: SINGLE;
FODM3083R2
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 3750 V; Maximum Forward Current: .06 A;
FODM3012_NF098
FODM3012_NF098 by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40°C to 100°C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
FODM3010R2
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Voltage: 3 V; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .06 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved