Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD420S by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, ideal for applications requiring high isolation voltage up to 5000V, such as trigger device outputs in various electronic circuits.
Median Price
$3.325
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
$2.560
100+ parts
$1.600
1k+ parts
$1.080
10k+ parts
-
DigiKey
$4.090
$2.385
$2.016
$1.855
Mouser Electronics
$2.390
$1.920
$1.860
Rochester
$1.690
$1.510
$1.420
Freelance Electronics
$1.191
Digiode
$1.776
Nova Conductors
$1.970
Flip Electronics
Vyrian
DigiKey Marketplace
Aztec Data Supply Inc.
$0.767
Corohmni
Semicontronic
$1.590
$1.550
$1.542
Ampacity Inc.
Corphita
$1.683
Continental Prestige Electronics
$1.901
$1.863
Argo Parts USA
Netroflash
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
TANS Electronics
Kulean Microsystems
Perfect Parts
SupplyDigital Components
Supply Digital
Problanco Electronics
UHIMA Technologies
This low on state voltage makes the product efficient and reliable, ensuring a stable output.
The single configuration simplifies the setup process and saves space, making it convenient for various applications.
With a high peak surge current, the product can handle sudden spikes in power, increasing its durability and longevity.
This low forward current ensures energy efficiency and prevents overheating, making it a cost-effective choice.
The TRIAC output optocoupler provides precise control and reliable performance in a variety of electrical circuits.
With a high maximum operating temperature, the product can withstand harsh environmental conditions, ensuring continuous operation.
The low minimum operating temperature allows for use in cold environments without affecting performance.
The matte tin finish provides corrosion resistance and enhances solderability, ensuring a secure connection.
The low input trigger current minimizes power consumption while maintaining a stable trigger signal for optimal performance.
The high repetitive off-state voltage ensures reliable isolation and protection for connected devices.
The nominal input trigger current strikes a balance between power efficiency and reliable triggering for consistent operation.
The extremely low reverse leakage current prevents energy wastage and maintains the integrity of the circuit.
The minimum peak off-state voltage provides robust isolation, safeguarding the circuit from voltage spikes and disturbances.
The high isolation voltage enhances safety and prevents electrical interference in critical applications.
The surface mounting feature simplifies installation and offers a compact design for space-constrained setups.
With a high on-state current capacity, the product can handle heavy loads and ensure stable operation under varying conditions.
Optocoupler Trigger Device Outputs FOD420S attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Input Trigger Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum On State Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
Peak Surge Current:
Repetitive Off-state Voltage (Peak):
Maximum Reverse Leakage Current:
Sub-Category:
Terminal Finish:
FOD420S Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Logo 17/Aug/2017
PCN Packaging - Mult Devices 24/Oct/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LL4148
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
Semiconductors
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
BSS138K-13
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
Taitron Components
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
MOC3023SR2M
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Repetitive Off-state Voltage (Peak): 400 V; Additional Features: UL RECOGNIZED; Maximum Input Trigger Current: .005 A;
TLP3062AF(F(O
Toshiba
Toshiba's TLP3062AF(F(O optocoupler has a max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high voltage protection and signal transmission with minimal leakage current.
MOC3023TVM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Peak Surge Current: 1 A; Maximum On State Voltage: 3 V; Minimum Peak Off-state Voltage: 400 V;
IL4208-X007T
Infineon Technologies
TRIAC OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Nominal Input Trigger Current: 1 mA; Maximum Isolation Voltage: 5300 V; No. of Elements: 1; Configuration: SINGLE;
TLP3073F(D4,TP4F(O
Toshiba's TLP3073F(D4,TP4F(O optocoupler offers 1.2A peak surge current and 800V repetitive off-state voltage. Ideal for triggering devices in applications requiring up to 5000V isolation voltage. With a max forward current of 0.02A, it operates b/w -25°C to 85°C temperatures efficiently.
MOC3052M
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 7500 V; JESD-609 Code: e3; Maximum Input Trigger Current: .01 A;
IL410
Telefunken Microelectronics
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum On State Current: .3 A;
MOC3061SVM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 7500 V; Minimum Operating Temperature: -40 Cel; Repetitive Off-state Voltage (Peak): 600 V;
BRT23H-X016
TRIGGER OUTPUT OPTOCOUPLER; Nominal Input Trigger Current: 2 mA; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Maximum On State Current: .3 A;
MOC3080X
Isocom Components
Isocom Components' MOC3080X is a single optocoupler with TRIAC output, featuring 0.05A max forward current and 30mA nominal input trigger current. With a max isolation voltage of 5300V, it operates b/w -30 to 100°C. Ideal for applications requiring high peak off-state voltage and on-state current control.
MOC3021SM
MOC3021SM by Texas Instruments is a TRIAC output optocoupler with 3V max on-state voltage, 1.2A peak surge current, and 400V repetitive off-state voltage. Ideal for applications requiring high isolation voltage of 7500V, such as industrial control systems and solid-state relays. Operating temperature ranges from -40°C to 100°C make it versatile for various environments.
MOC3082SM
The Onsemi MOC3082SM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for applications requiring high isolation voltage of 7500V, operating temperature range from -40 to 85 °C, and surface mounting feature.
FODM3083
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Maximum On State Current: .07 A; Maximum Forward Current: .06 A; Maximum Operating Temperature: 100 Cel;
MOC3082SR2M
The Onsemi MOC3082SR2M is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for applications requiring high isolation voltage of 7500V, operating temperature range from -40 to 85 °C, and surface mounting feature.
MOC3021M
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Repetitive Off-state Voltage (Peak): 400 V; Maximum On State Voltage: 3 V; Maximum Isolation Voltage: 5300 V;
FODM3012R2V_NF098
FODM3012R2V_NF098 by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40°C to 100°C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
IL4218-X016
Siemens
TRIAC OUTPUT OPTOCOUPLER; Nominal Input Trigger Current: .7 mA; Maximum On State Current: .3 A; No. of Elements: 1; Minimum Peak Off-state Voltage: 800 V; Minimum Operating Temperature: -55 Cel;
MOC3020.S
TRIAC OUTPUT OPTOCOUPLER; Configuration: SINGLE; Nominal Input Trigger Current: 30 mA; Maximum Isolation Voltage: 5300 V; Additional Features: UL APPROVED; No. of Elements: 1;
MOC3021.S
Qt Optoelectronics
TRIAC OUTPUT OPTOCOUPLER; Minimum Peak Off-state Voltage: 400 V; Additional Features: UL APPROVED; Nominal Input Trigger Current: 15 mA; Maximum Isolation Voltage: 5300 V; No. of Elements: 1;
FODM3063
The Onsemi FODM3063 is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40°C to 100°C, providing isolation up to 3750V. Ideal for triggering devices in applications requiring high voltage protection and signal isolation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD4208SDV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: .75 mA; Maximum Forward Current: .03 A; No. of Elements: 1; Configuration: SINGLE;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Input Trigger Current: .002 A; JESD-609 Code: e3; Repetitive Off-state Voltage (Peak): 800 V;
FOD4208SD
FOD4208SD by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It is commonly used in applications requiring optocoupler trigger device outputs, such as in industrial control systems or power management circuits.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 800 V; Nominal Input Trigger Current: .75 mA; JESD-609 Code: e3; Additional Features: UL RECOGNIZED;
FOD4208SV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; Minimum Peak Off-state Voltage: 800 V;
FOD4208SV by Onsemi is a TRIAC OUTPUT OPTOCOUPLER with 3V Max On State Voltage, 3A Peak Surge Current, and -55 to 100°C Operating Temperature. It is ideal for applications requiring optocoupler trigger device outputs in various electronic circuits.
FOD4108SDV
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum Operating Temperature: 100 Cel;
FOD4108SDV by Onsemi is a single TRIAC output optocoupler with 3A peak surge current and 800V repetitive off-state voltage. It operates b/w -55 to 100 °C, ideal for applications requiring high isolation voltage of 5000V in surface mount configurations.
FOD4208
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .03 A; Additional Features: UL RECOGNIZED; Configuration: SINGLE;
The Onsemi FOD4208 is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, with an isolation voltage of 5000V. Ideal for applications requiring optocoupler trigger device outputs in through-hole mounting configurations.
FOD420
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Maximum Reverse Leakage Current: .00001 A; Maximum On State Current: .3 A; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: .75 mA; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5000 V;
FOD4208S
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .03 A; Minimum Peak Off-state Voltage: 800 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; No. of Elements: 1; Maximum On State Voltage: 3 V;
FOD4208TV
FOD4208TV by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55°C to 100°C, ideal for triggering devices in various applications. With an isolation voltage of 5000V, it offers reliable performance in through-hole mounting setups.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .03 A; JESD-609 Code: e3; Nominal Input Trigger Current: .75 mA; Additional Features: UL RECOGNIZED, VDE APPROVED;
FOD420SDV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3; Minimum Peak Off-state Voltage: 600 V;
FOD420SDV by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high voltage protection.
FOD420S
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: .75 mA; Maximum Forward Current: .03 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved