Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MM3Z2V4ST1 by Onsemi is a Zener diode with a nominal reference voltage of 2.4V and max power dissipation of 0.2W. It operates at a max temperature of 150 °C, has a working test current of 5mA, and offers a max voltage tolerance of 3.95%. This diode is commonly used in applications requiring precise voltage regulation in electronic circuits.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
ComSIT Distribution GmbH
ComSIT USA
Vyrian
Digiode
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
SupplyDigital Components
TANS Electronics
UHIMA Technologies
Kulean Microsystems
Corphita
Corohmni
This material provides durability and protection for the diode, ensuring a longer lifespan and reliable performance.
The 5 mA current allows for accurate testing and calibration of the diode, ensuring precise functionality.
The surface mount feature makes installation and integration of the diode easier and more convenient in circuit design.
With a low voltage tolerance, this diode provides consistent and stable performance in various voltage conditions.
The high operating temperature range of 150 °C allows for reliable operation even in demanding environments.
The low dynamic impedance results in efficient conversion of electrical energy and minimal power loss in the circuit.
This diode can dissipate up to 0.2 watts of power, making it suitable for handling moderate power loads without overheating.
The 2.4V reference voltage provides a stable reference point for voltage regulation and control in electronic circuits.
The unidirectional polarity ensures that the diode allows current flow in one direction only, preventing reverse current flow and protecting the circuit.
Zener Diodes MM3Z2V4ST1 attributes and parameters. Explore more Zener Diodes devices from Onsemi
Config:
Diode Element Material:
Diode Type:
Maximum Dynamic Impedance:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity:
Maximum Power Dissipation:
Qualification:
Nominal Reference Voltage:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Voltage Tolerance:
Working Test Current:
MM3Z2V4ST1 Diodes trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.10.00.50
SB
PCN Obsolescence/ EOL - Multiple Devices 06/Oct/2006
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Semtech
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Goodwork Semiconductor
BZV55C12
North American Philips Discrete Products Div
ZENER DIODE; Surface Mount: YES; Nominal Reference Voltage: 12 V; Working Test Current: 5 mA; Maximum Voltage Tolerance: 5 %; Config: SINGLE;
BZT52C5V1-7-F
Diodes Incorporated
BZT52C5V1-7-F by Diodes Inc. is a Zener diode with 5.1V nominal reference voltage, 2uA max reverse current, and 480 ohm max knee impedance. It is ideal for voltage regulation in electronic circuits, offering a small outline package and dual terminal position for surface mount applications at temperatures ranging from -65 to 150°C.
BZX84-C12,235
NXP Semiconductors
The NXP Semiconductors BZX84-C12,235 is a Zener diode with a 12V nominal reference voltage and 5% max voltage tolerance. It operates b/w -65 to 150 °C and has a max power dissipation of 0.25W. Ideal for applications requiring precise voltage regulation in compact electronic devices.
1SMB5915BT3G
Onsemi
1SMB5915BT3G by Onsemi is a Zener diode with a nominal reference voltage of 3.9V, max power dissipation of 0.55W, and working test current of 96.1mA. It is used in applications requiring precise voltage regulation such as power supplies and voltage references due to its unidirectional polarity and small outline package style.
BZV55C5V1
ZENER DIODE; Surface Mount: YES; No. of Elements: 1; Maximum Voltage Tolerance: 5 %; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb);
1N5337B
New Jersey Semiconductor Products
ZENER DIODE; Config: SINGLE; Polarity: UNIDIRECTIONAL; Nominal Reference Voltage: 4.7 V; No. of Elements: 1; Minimum Operating Temperature: -65 Cel;
BZX84-C4V7
ZENER DIODE; Surface Mount: YES; Config: SINGLE; Maximum Dynamic Impedance: 80 ohm; Working Test Current: 5 mA; Maximum Voltage Tolerance: 5 %;
MMSZ4678T1G
MMSZ4678T1G by Onsemi is a Zener diode with a working test current of 0.05 mA and a max voltage tolerance of 5%. It is commonly used in applications requiring voltage regulation, such as power supplies and voltage references.
SZMMSZ4684T1G
SZMMSZ4684T1G by Onsemi is a Zener diode with 3.3V nominal reference voltage, 5.15% max voltage tolerance, and 0.05mA working test current. It is ideal for applications requiring precise voltage regulation in automotive electronics due to AEC-Q101 compliance and small outline package style.
BZX84C5V6
Won-top Electronics
ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SZMMSZ5240BT1G
SZMMSZ5240BT1G by Onsemi is a Zener diode with 10V nominal reference voltage, 5% max voltage tolerance, and 17 ohm max dynamic impedance. It is ideal for applications requiring precise voltage regulation in automotive electronics due to AEC-Q101 compliance and small outline package design.
BZV55C15
Compensated Devices
ZENER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4741A
Leshan Radio
ZENER DIODE; Surface Mount: NO; Maximum Voltage Tolerance: 5 %; Config: SINGLE; No. of Elements: 1; Maximum Dynamic Impedance: 8 ohm;
MM3Z5V6T1G
Nexperia
ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5338B
Boca Semiconductor
ZENER DIODE; Surface Mount: NO; Working Test Current: 240 mA; Maximum Power Dissipation: 5 W; Config: SINGLE; Maximum Dynamic Impedance: 1.5 ohm;
BZX84C5V6-7-F
BZX84C5V6-7-F by Diodes Inc. is a Zener diode with 5.6V nominal voltage, 40 ohm impedance, and 7.14% voltage tolerance. It operates b/w -65 to 150°C, has a power dissipation of 0.35W, and is ideal for voltage regulation in electronic circuits due to its unidirectional polarity and silicon material composition.
BZX84-C4V7,215
NXP Semiconductors' BZX84-C4V7,215 Zener Diode has a 4.7V nominal reference voltage with a max reverse current of 3uA. It operates in temperatures ranging from -65 to 150 °C and has a max power dissipation of 0.25W. Ideal for applications requiring precise voltage regulation in compact electronic devices.
BZX85-C11
Microsemi's BZX85-C11 Zener Diode has a 11V Nominal Reference Voltage with 6% Max Voltage Tolerance. It operates at 200°C, dissipating up to 1.3W power, ideal for voltage regulation in electronic circuits requiring a unidirectional Zener diode with a working test current of 20mA.
MM3Z5V1T1G
MM3Z5V1T1G by Onsemi is a Zener diode with a working test current of 5 mA and max reverse current of 2 uA. It is used for voltage regulation in various electronic applications.
MM3Z3V3T1G
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MM3Z12VT1G
MM3Z12VT1G by Onsemi is a Zener diode with 12V nominal reference voltage, 5 mA test current, and 8V reverse test voltage. It is ideal for applications requiring precise voltage regulation in small outline packages. With a max power dissipation of 0.3W and operating temperature range from -65 to 150°C, it offers reliable performance in various electronic circuits.
MM3Z15VT1G
MM3Z15VT1G by Onsemi is a Zener diode with a 15V nominal reference voltage, suitable for applications requiring precise voltage regulation. It has a max power dissipation of 0.3W and operates in temperatures ranging from -65 to 150 °C. With a reverse test voltage of 10.5V and low dynamic impedance of 30 ohm, it is ideal for circuit protection and voltage stabilization in electronic devices.
MM3Z10VT1G
MM3Z10VT1G by Onsemi is a Zener diode with 10V nominal reference voltage, 8V reverse test voltage, and 5mA working test current. It is ideal for applications requiring precise voltage regulation in small outline packages.
MM3Z5V1ST1G
MM3Z5V1ST1G by Onsemi is a Zener diode with a nominal reference voltage of 5.1V and max power dissipation of 0.3W. It operates in temperatures ranging from -65 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices due to its small outline package style and unidirectional polarity.
MM3Z3V3ST1G
MM3Z3V3ST1G by Onsemi is a Zener diode with a nominal reference voltage of 3.3V and max voltage tolerance of 3.07%. It operates in temperatures ranging from -65 to 150 °C and has a max power dissipation of 0.3W. This diode is ideal for applications requiring precise voltage regulation in compact electronic devices.
MM3Z3V3T1G by Onsemi is a Zener diode with 3.3V nominal reference voltage, ideal for voltage regulation applications. It has a max power dissipation of 0.3W and operates b/w -65 to 150 °C, making it suitable for various electronic circuits. With a small outline package style and matte tin terminal finish, it offers reliable performance in compact designs.
MM3Z15VST1G
MM3Z15VST1G by Onsemi is a Zener diode with a nominal reference voltage of 15V and max power dissipation of 0.3W. It operates in temperatures ranging from -65°C to 150°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices due to its small outline package style and gull wing terminal form.
MM3Z5V6T1G by Onsemi is a Zener diode with a working test current of 5 mA and max reverse current of 1 uA. It is used for voltage regulation in various electronic applications.
MM3Z12VT1GX
MM3Z12VT1GX by Nexperia is a Zener diode with a 12V nominal reference voltage and 9V reverse test voltage. It has a max power dissipation of 0.3W, operating temperature range from -55 to 150 °C, and low dynamic impedance of 10 ohm. Ideal for applications requiring precise voltage regulation in compact electronic circuits.
MM3Z18VT1G
MM3Z18VT1G by Onsemi is a Zener diode with a 18V nominal reference voltage, ideal for voltage regulation in electronic circuits. It has a max reverse current of 0.05 uA and operates b/w -65 to 150 °C, making it suitable for various temperature conditions. With a small outline package style and gull wing terminal form, it is designed for surface mount applications requiring precise voltage control.
MM3Z3V6T1G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved