Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi MID400VM is a single optocoupler circuit output with a max isolation voltage of 5000V. It has a nominal response time of 1000000ns and can operate in temperatures ranging from -40°C to 85°C. This device is commonly used for logic IC output applications.
Median Price
$2.469
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
Flip Electronics
Ampacity Inc.
$1.100
Corohmni
$2.371
Continental Prestige Electronics
$2.419
Argo Parts USA
AZTECH Wire
$13.183
QUARKTWIN TECHNOLOGY LTD
SupplyDigital Components
Problanco Electronics
TANS Electronics
Kulean Microsystems
Corphita
UHIMA Technologies
Netroflash
$2.345
$2.296
The product is designed with a single configuration, which means it is easy to install and use, saving the customers time and effort in setting up the optocoupler circuit outputs.
With this optoelectronic type, the product offers reliable and accurate signal transmission, ensuring that the customer's electronic devices or circuits receive the correct logic level output.
The product can operate within a temperature range of -40°C to 85°C, providing versatility and adaptability to various environments. This ensures consistent performance and reliability even in extreme temperature conditions, giving customers peace of mind.
The nominal response time of 1000000 ns guarantees quick and efficient signal transmission, minimizing delays and enhancing the overall performance of the customer's electronic system. This feature is particularly beneficial for applications that require high-speed data processing or real-time responsiveness.
The product offers a maximum isolation voltage of 5000 V, providing excellent electrical isolation between input and output. This ensures safety and protects the customer's equipment from potential damage caused by voltage fluctuations or surges, ultimately enhancing the durability and longevity of their electronic systems.
The mounting feature allows for easy and secure installation onto circuit boards or other electronic devices. This simplifies the integration process for the customer, reducing assembly time and efforts while ensuring a stable connection.
Overall, these technical specifications contribute to the value of the product by offering ease of installation, reliable signal transmission, adaptability to different temperatures, fast response times, high-level electrical isolation, convenient mounting options, and secure packaging. By addressing pain points such as time-consuming setup, signal accuracy, temperature limitations, slow responsiveness, electrical safety concerns, and ease of integration, the product provides a comprehensive solution that enhances the overall performance and reliability of the customer's electronic systems.
Optocoupler Circuit Outputs MID400VM attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Nominal Response Time:
MID400VM Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Central Semiconductor
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
ABS10-32.768KHZ-T
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
HCPL-0601-000E
Agilent Technologies
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Nominal Supply Voltage: 5.5 V; Maximum Forward Current: .02 A; Maximum Isolation Voltage: 3750 V; Minimum Operating Temperature: -40 Cel;
TLP2362(V4-TPL,E
Toshiba
Toshiba's TLP2362(V4-TPL,E is a single optocoupler with logic IC output, operating at -40 to 125 °C. It has a max isolation voltage of 3750 V and response time of 35 ns, suitable for surface mount applications requiring a nominal data rate of 10 MBps.
HCPL-2730.S
Qt Optoelectronics
HCPL-2730.S by Qt Optoelectronics is a 2-channel optocoupler with built-in resistor. It has a max forward current of 0.02A and isolation voltage of 2500V. Ideal for logic IC output applications, operating b/w -40°C to 85°C temperature range.
6N136
North American Philips Discrete Products Div
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel; No. of Elements: 1;
6N139STA-V
Lite-on Technology
6N139STA-V by Lite-on Technology is a single optocoupler circuit output with a max forward current of 0.02 A. It has a max isolation voltage of 2500 V and can operate in temperatures ranging from 0 to 70 °C. This component is commonly used in logic IC output applications.
HCPL0637
HCPL0637 by Onsemi is a 2-channel logic IC output optocoupler with separate configuration. It offers a max isolation voltage of 3750V, nominal data rate of 10MBps, and operates b/w -40 to 85°C. Ideal for applications requiring high-speed signal transmission in harsh environments.
HCPL0600R2
The Onsemi HCPL0600R2 is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 3750V. It operates b/w -40 to 85°C, has a response time of 50ns, and is ideal for logic IC output applications.
6N136V
The Onsemi 6N136V is a single optocoupler with a max forward current of 0.025A and isolation voltage of 2500V. It has a nominal response time of 450ns, making it ideal for logic IC output applications requiring high-speed data transmission at up to 1MBps. With a rectangular shape and through-hole mounting feature, it operates efficiently in temperatures ranging from 0 to 70°C.
5962-8947701XA
Broadcom
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Response Time: 10000 ns; Minimum Supply Voltage: 3 V; Additional Features: HIGH RELIABILITY;
6N138
LOGIC IC OUTPUT OPTOCOUPLER; Nominal Data Rate: .1 MBps; No. of Elements: 1; Maximum Isolation Voltage: 2500 V; Configuration: SINGLE; Additional Features: UL RECOGNIZED, CMOS COMPATIBLE;
FOD8160R2V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Response Time: 90 ns; JESD-609 Code: e3; Maximum Isolation Voltage: 5000 V;
HCPL-2630-500E
Broadcom's HCPL-2630-500E is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.015A and operates at temperatures ranging from -40 to 85°C. Ideal for logic IC output applications, it offers high isolation voltage of 3750V and fast response time of 100ns.
HCPL-3700-500E
HCPL-3700-500E by Broadcom is a single optocoupler with logic IC output. It has a max forward current of 0.05A and operates at temperatures b/w 0 to 70°C. With an isolation voltage of 3750V, it is ideal for applications requiring precise signal transmission in electronic circuits.
MID400SDV
The Onsemi MID400SDV is a single optocoupler with logic IC output. It has a max forward current of 0.03A and operates b/w -40°C to 85°C. With a max isolation voltage of 2500V, it is ideal for surface mount applications requiring high voltage protection in electronic circuits.
OPT101P-J
Burr-Brown Corporation
LINEAR IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Application: AMPLIFIER; Nominal Supply Voltage: 36 V;
TLP2719(TP4,E
Toshiba TLP2719(TP4,E is a single optocoupler with max. forward current of 0.025A and isolation voltage of 5000V. Ideal for logic IC output applications, it operates b/w -40 to 100°C with response time of 300ns, data rate of 1MBps, and on-state current of 0.008A.
TLP2368(TPL,E
Toshiba's TLP2368(TPL,E optocoupler offers 3750V isolation, 30ns response time, and 20MBps data rate. Ideal for logic IC output applications with a single configuration, operating b/w -40°C to 125°C.
HCPL-0701-500E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Forward Current: .012 A; No. of Elements: 1; Minimum Current Transfer Ratio: 400 %;
TLP2361(TPRE
Toshiba's TLP2361(TPRE is a single optocoupler with max. forward current of 0.01A, ideal for logic IC outputs. It operates b/w -40 to 125°C, offers 3750V isolation voltage, and has a fast response time of 3ns. Suitable for surface mount applications requiring high isolation and low power consumption.
PS8101-F3-AX
Renesas Electronics
PS8101-F3-AX by Renesas Electronics is a SINGLE optocoupler with 3750V isolation voltage, 0.025A max forward current, and 1MBps data rate. Ideal for linear IC output applications in temperatures ranging from -55 to 100°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; JESD-609 Code: e3; Maximum Forward Current: .03 A; Maximum Operating Temperature: 85 Cel;
MID400.SD
LOGIC IC OUTPUT OPTOCOUPLER; Configuration: SINGLE; Additional Features: UL APPROVED; No. of Functions: 1; No. of Elements: 1; Maximum Isolation Voltage: 2250 V;
MID400SD
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 2500 V; Maximum Forward Current: .03 A; No. of Elements: 1;
The Onsemi MID400SD is a single optocoupler with a max forward current of 0.03A and logic IC output type. It operates b/w -40 to 85°C, has a max isolation voltage of 2500V, and nominal voltage of 7V. Ideal for surface mount applications in circuits requiring high isolation and low power dissipation.
MID400SDVM
The Onsemi MID400SDVM is a single optocoupler with logic IC output. It offers 5000V isolation voltage, -40 to 85°C operating temperature range, and 1000000ns response time. Ideal for surface mount applications in various electronic circuits requiring high voltage isolation.
MID400SDM
The Onsemi MID400SDM is a single optocoupler with logic IC output. It offers 5000V isolation voltage, -40 to 85°C operating temperature range, and 1000000ns response time. Ideal for surface mount applications in various electronic circuits requiring high voltage isolation.
MID400S
The Onsemi MID400S is a single optocoupler with a max forward current of 0.03A and isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40 to 85°C, with matte tin terminal finish and surface mounting feature.
MID400.S
LOGIC IC OUTPUT OPTOCOUPLER; Configuration: SINGLE; No. of Elements: 1; Additional Features: UL APPROVED; No. of Functions: 1; Maximum Isolation Voltage: 2250 V;
MID400..S
MID400..S by Fairchild Semiconductor is an optocoupler circuit output with a max forward current of 0.03A and isolation voltage of 2500V. It operates b/w 0-70°C, has a power dissipation of 0.07W, and nominal voltage of 7V. Ideal for surface mount applications in various electronic circuits.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; JESD-609 Code: e3; Maximum Isolation Voltage: 2500 V;
MID400M
MID400M by Onsemi is a single optocoupler with logic IC output. It offers a max isolation voltage of 5000V and operates b/w -40°C to 85°C. Ideal for applications requiring through hole mounting, with a nominal response time of 1000000ns.
MID400SV
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; Maximum Forward Current: .03 A; No. of Elements: 1;
LOGIC IC OUTPUT OPTOCOUPLER; No. of Elements: 1; Maximum Forward Current: .03 A; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 85 Cel; Configuration: SINGLE;
MID400
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, TTL COMPATIBLE; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 2500 V; Maximum Forward Current: .03 A;
The Onsemi MID400 is a single optocoupler with a max forward current of 0.03A and logic IC output type. It operates b/w -40 to 85°C, has an isolation voltage of 2500V, and a response time of 1000000ns. Ideal for applications requiring through-hole mounting and reliable signal isolation in electronic circuits.
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Additional Features: UL RECOGNIZED, LOGIC LEVEL COMPATIBLE; No. of Elements: 1; Maximum Isolation Voltage: 2250 V;
General Instrument Optoelectronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Configuration: SINGLE; Maximum Power Dissipation: .07 W; No. of Elements: 1;
Quality Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Isolation Voltage: 2500 V; No. of Functions: 1; Configuration: SINGLE;
MID400SM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Configuration: SINGLE; Additional Features: UL RECOGNIZED, TTL COMPATIBLE; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved