Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC79L12ACDR2 by Onsemi is a fixed negative single output standard regulator with 12V nominal output voltage. It has a max output current of 0.1A and operates in an input voltage range of 14.5V to 27V, making it suitable for various electronic applications requiring stable power supply.
Median Price
-
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
ECAB
1+ parts
100+ parts
1k+ parts
10k+ parts
ComSIT Distribution GmbH
Cyclops Electronics Ltd
Zilex Electronics Inc.
LIBRA Elektronik GmbH
ACDS - Activité Composants Distribution Service
Bristol Electronics
Dan-Mar Components
Legend Electronics Inc.
Inventory MP
LWI Electronics Inc
First Choice Components Inc.
Vyrian
Greenchips
SIE Connect GmbH - GreenChips
Digiode
Nova Conductors
Ampacity Inc.
$2.500
AZTECH Wire
$15.837
Perfect Parts
Lixinc
QUARKTWIN TECHNOLOGY LTD
Microchip USA
Cyclops Electronics Ltd (Excess)
A-Z Elektronik GmbH
Problanco Electronics
TANS Electronics
SupplyDigital Components
Kulean Microsystems
Authorized Procurement Solutions
Metaverse IC Inc.
Assy Fe
Infinite Electronics LLP (Excess)
Corphita
Aranea Global
Kepictronics
UHIMA Technologies
Corohmni
The use of plastic/epoxy material makes the product lightweight and durable, suitable for various applications.
The high maximum operating temperature ensures reliable performance even in harsh conditions.
Stable output voltage of 12V ensures consistent power supply to the connected devices.
Fixed adjustability eliminates the need for manual adjustments, making the product simple to use and install.
With a maximum output current of 0.1A, the product is suitable for low-power applications.
Fixed Regulators - Negative Single Output Standard MC79L12ACDR2 attributes and parameters. Explore more Fixed Regulators - Negative Single Output Standard devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
MC79L12ACDR2 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-417-9067, 5962014179067
NIIN
014179067
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Itt Semiconductor
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
4554
Jw Miller Magnetics
Other Semiconductors;
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Eic Semiconductor
OMR7915SRS
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 3 %; Adjustability: FIXED;
LM79L05ACTLX/NOPB
LM79L05ACTLX/NOPB by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable power supplies in compact spaces. The package style is grid array with very thin profile and fine pitch, ideal for surface mount designs.
MC79M05BT
MC79M05BT by Onsemi is a BIPOLAR fixed negative single output standard regulator with an operating temperature range of -40 to 125 °C. It has a nominal output voltage of 5V, max load regulation of 0.1%, and can handle a max output current of 0.5A. Ideal for applications requiring stable voltage regulation in harsh environments.
LM120H-15
LM120H-15 by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 15V and max current of 1.5A. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable power supply in harsh environments. With a package style of cylindrical and gold terminal finish, it offers precise regulation with minimal line and load variations.
LM79L05ACZ
Rochester Electronics
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 5 %; Package Body Material: UNSPECIFIED;
L7912CP
L7912CP by STMicroelectronics is a fixed negative single output standard regulator with an operating temperature range of 0-125 °C. It has a nominal output voltage of 12V, max load regulation of 0.24%, and can handle a max output current of 1.5A. Ideal for applications requiring stable power supply in various electronic devices.
TA79L008P,F(J
Toshiba
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
KA7915ATU
KA7915ATU by Onsemi is a fixed negative single output standard regulator with a nominal output voltage of 15V and max load regulation of 0.3%. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various applications requiring stable power supply such as industrial automation and automotive electronics.
MC79L15ACLPRE3
MC79L15ACLPRE3 by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 15V and max current of 0.1A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact cylindrical package.
MC79M08CTG
MC79M08CTG by Onsemi is a fixed negative single output standard regulator with 8V nominal output voltage, 0.5A max output current, and 3.75% voltage tolerance. It operates b/w -40 °C to +125°C making it suitable for various applications requiring stable power supply in harsh environments.
LM79L05ACZ/T7
LM79L05ACZ/T7 by Texas Instruments is a fixed negative single output standard regulator with 3 terminals. It operates at an input voltage range of 7-20V and provides a stable output voltage of 5V with a tolerance of 5%. With a max output current of 0.1A, it is ideal for applications requiring precise voltage regulation in various electronic devices.
LM120KG-5MD8
LM120KG-5MD8 by Texas Instruments is a fixed negative single output standard regulator with 1.5A max output current and 2% voltage tolerance. Operating temperature ranges from -55 to 150°C, making it suitable for various applications in electronics requiring stable 5V power supply. Surface mountable with no lead terminal form, ideal for compact designs.
TA79006SB(TP,Q)
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR;
L79L09CZ
L79L09CZ by STMicroelectronics is a fixed negative single output standard regulator with an operating temperature range of 0-125 °C. It has a nominal output voltage of 9V, max load regulation of 0.08%, and can handle a max output current of 0.1A. This regulator is commonly used in applications requiring stable power supplies with precise voltage control.
MC7915CTG
MC7915CTG by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage, 1A max output current, and 0.3% load regulation. It operates in temperatures ranging from 0 to 125°C and is ideal for applications requiring a stable power supply in electronic circuits.
L79L08CD
STMicroelectronics' L79L08CD is a fixed negative single output standard regulator with an 8V nominal output voltage and 0.1A max output current. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring a compact design and precise voltage regulation.
L7922CD2T-TR
L7922CD2T-TR by STMicroelectronics is a fixed negative single output standard regulator with an output voltage of 22V and max current of 1.5A. It operates b/w 0 to 125 °C, making it suitable for various applications requiring stable power supplies in compact spaces. The package style is small outline, ideal for surface mount designs.
L79L05ACZ-TR
L79L05ACZ-TR by STMicroelectronics is a fixed negative single output standard regulator with an operating temperature range of 0 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.1A. This regulator is commonly used in applications requiring stable power supplies with precise voltage control.
L79L09ACUTR
L79L09ACUTR by STMicroelectronics is a fixed negative regulator with a nominal output of 9V and max current of 0.1A, ideal for low-power applications. It operates b/w 11.5V to 30V input and withstands temperatures up to 125 °C. Its compact design ensures efficient space utilization in electronic circuits.
MC79L05CLP
MC79L05CLP by Texas Instruments is a fixed negative single output standard regulator with 5V nominal output voltage and 0.1A max output current. It operates b/w 0-125°C, has a dropout voltage of 1.7V, and can handle input voltages up to 30V. Ideal for applications requiring stable power supply in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC79M05CDTRKG
MC79M05CDTRKG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The package style is small outline, terminal finish is matte tin, and it features gull wing terminals for easy surface mounting.
MC79M05CDTG
MC79M05CDTG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, terminal finish is matte tin, and it features gull wing terminals for easy mounting on PCBs.
MC79M05BDTRKG
MC79M05BDTRKG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max output current of 0.5A. It is commonly used in applications requiring a stable and regulated power supply, such as industrial control systems and automotive electronics.
MC79L05ACPG
MC79L05ACPG by Onsemi is a fixed negative single output standard regulator with 5V nominal output voltage and 0.1A max output current. It has a dropout voltage of 1.7V, operates in temperatures from 0 to 125°C, and offers excellent line/load regulation for various electronic applications.
MC79M05BDTG
MC79M05BDTG by Onsemi is a fixed negative single output standard regulator with 5V nominal output voltage, 0.5A max output current, and -40 to 125°C operating temperature range. It is ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package style and surface mount capability.
MC79M15CDTRKG
MC79M15CDTRKG by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage and 0.5A max output current. Operating temperature range from 0 to 125°C makes it suitable for various applications in electronics requiring stable power supply. This surface mount device with gull wing terminals is ideal for compact designs where space is limited.
MC79M15BDTRKG
MC79M15BDTRKG by Onsemi is a fixed negative single output standard regulator with an output voltage of 15V and max current of 0.5A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package and surface mount capability enhance versatility in electronic designs.
MC79L05ACDR2G
MC79L05ACDR2G by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC79M15CDTG
MC79M15CDTG by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage and 0.5A max output current. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC7912CTG
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MC79M15BDTG
MC79M15BDTG by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage. It has a max output current of 0.5A and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact spaces.
MC7915BTG
MC7915BTG by Onsemi is a fixed negative single output standard regulator with an output voltage of 15V and max current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable power supplies. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability.
MC7905CTG
MC7905CTG by Onsemi is a fixed negative single output standard regulator with 1A max output current. It has an operating temperature range of 0-125°C and a dropout voltage of 1.3V. Ideal for applications requiring a stable 5V output voltage in various electronic devices.
MC79M12CDTRKG
MC79M12CDTRKG by Onsemi is a fixed negative single output standard regulator with 12V nominal output voltage and 0.5A max output current. It operates at an input voltage range of 14.5-30V, has a dropout voltage of 1.1V, and offers excellent line/load regulation for various applications requiring stable power supplies in compact designs.
MC79L05ACDG
MC79L05ACDG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs.
MC79M12BDTRKG
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %;
MC79L05ABDG
MC79L05ABDG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in electronics requiring stable voltage regulation. Its small outline package and surface mount capability enhance ease of integration into compact designs.
MC79L05ABDR2G
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 5 %;
MC79L05ACDR2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved